So I was putting some new shocks on today and was looking around the under of my car with a light. I was looking for the oil feed line and found the leak! The T fitting from the sensor to the fitting was leaking oil and spilling all over the place, onto the tranny, the cross members, everywhere. I tightened the fitting with a 12mm wrench but I need to tighten the sensor. ANyone know what size wrench is it? I gotta put some Teflon paste on that thang to. Just wanna thank everyone for supporting and helping me out.

Alvin

Alvin

http://www.cardomain.com/id/96rst

Yo alvin,
is it the oil pressure switch that is screwed into the T with the turbo oil line? If so you need to get a special socket for oil pressure switches. it is really deep cause the plastic part has to have clearance. i'll measure mine when i get home and let you know. I think you can use a regulat socket but it has to be a deep one. I just went to Autozone and bought the oil pressure sensor socket for chrysler and it fit fine.
Lates
James

Rest In Peace Heidi Doggy