So I was putting some new shocks on today and was looking around the under of my car with a light. I was looking for the oil feed line and found the leak! The T fitting from the sensor to the fitting was leaking oil and spilling all over the place, onto the tranny, the cross members, everywhere. I tightened the fitting with a 12mm wrench but I need to tighten the sensor. ANyone know what size wrench is it? I gotta put some Teflon paste on that thang to. Just wanna thank everyone for supporting and helping me out.

Alvin

Yo alvin,
is it the oil pressure switch that is screwed into the T with the turbo oil line? If so you need to get a special socket for oil pressure switches. it is really deep cause the plastic part has to have clearance. i'll measure mine when i get home and let you know. I think you can use a regulat socket but it has to be a deep one. I just went to Autozone and bought the oil pressure sensor socket for chrysler and it fit fine.
Lates
James