Which would be better to get?

I'm ordering an hrc stage I.. I would like a loud bov, something that people will hear... but I dont know if that would work with a stage I and auto tranny..

Any advice?

Get a good BOV!!...You'll enjoy it more than a overbored TB. It'll improve your boost response between shifts and let everyone know 'wussup'. Actually I'm getting sick of my GReddy BOV whistle..it's always pisssshuuuuu all the time. I want a different sound sometimes like an HKS or Blitz..anyone feel me

alvin

Alvin

http://www.cardomain.com/id/96rst

It honestly doesn't make a difference whether your throttle body is bored not. With turbo, you've got forced induction. So it doesn't really matter how big the throttle body is.

so, anyone recommend a loud BOV for a stage I?

Sorry bro but your auto like me.You ain't gonna hear no ppsshhh sound every shift,just when you let off the throttle under pressure.Have you considered a boost controller?Even a regular MBC will dramatically improve boost response even w/ just 5 PSI.Bored TB is good for you only if you have it port matched to the intake manifold.

get a tile bov.. they are a little expensive cause u gotta weld it on but they are s-w-e-e-t.........

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--

Ok, so any advice on this?

I have about 200 bucks or so to spend after the turbo goes in.. what should I do? MBC, a better bov, or bored TB?

Any suggestions?

(Thanks btw for all the help guys)

>It honestly doesn't make a difference whether your throttle
>body is bored not. With turbo, you've got forced induction.
>So it doesn't really matter how big the throttle body is.

No, it is always better to get more air into an engine. The more air you can cram in, and the more fuel you can add, the more horsepower you can produce... bored tb is a good thing always, improves throttle response by helping your engine breathe better...

tial, the only way to fly...

-bryan
'98 rst

what does the tial sound like?

Rest In Peace Heidi Doggy

>what does the tial sound like?

PSSSSSHHHHH!!!!


______________________________
current status unknown

http://hometown.aol.com/ohshootuhh/

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Drop in K&N Filter and open airbox
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

>No, it is always better to get more air into an engine. The
>more air you can cram in, and the more fuel you can add, the
>more horsepower you can produce... bored tb is a good thing
>always, improves throttle response by helping your engine
>breathe better...


Couldn't have said it better Brad. That is why 2G 4G63 people swap their 52mm TBs for 1st gen 60mm throttle bodies. More air = more power.

BOV or TB

Would you prefer asthetics(BOV) or performance(TB)?

05 Mazda RX-8
06 Lotus Elise

Considering that I'm auto and wont even hear the bov when the car shifts, I guess the BOV will wait..

Would I be better off with the Manual boost controller or the bored TB? And can you recommend a MBC or let me know which not to get? There are a bunch on ebay..

Sorry for the tons of newbie questions and thanks all for the answers!!

i have the turboxs type h RFL and its really loud. I had the crappy hrc stage 1 plastic bov and it leaks like crazy. Its OK but dont expect much air to go to your engine lol. Even though I'm stage 2, every stage 1 i installed has this darn bov leaking.

A turboxs type h rfl on a stage 1 sounds nice.

_________________
Vinnie Lima
vlima@csc.com
AIM: Kiku888
1997 Chrysler Sebring "Silver XTC"
I4 420a w/ HRC Stage 2.45 w/ FMIC
14.7@97 mph@6psi
Proud member of the
ASOG BoOsT JuNkIe Crew

dont get a bored TB. They will not beable to bore it out as much as the ones on the market. so get the BOV.

Robert Parkhurst
toykilla@comcast.net

get the bov

i have the turboxs type H-RFL, and im auto too. you wont hear the bov when your racing, but that doesnt mean you cant blow off at every car on the street and all the pedestrians (its fun to watch em get scared shitless and jump 3 feet in the air)

its the most addictive sound, lol

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

http://www.3sxperformance.com
is the type S the same? the type H says is for 10-30 psi.. Where else can I find them?

thanks guys!!

no, the type s is the lower model. i havent heard it, but supposedly it sounds similar, just not as loud.

i know it says for 10-30, but even when i was running 4lbs, the type h worked fine. now its even better at 7lbs

heres a quick video of it:

http://www.asog.net/phantom/pics/movies/bov-idle.mpg

and this is just in idle

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

so does that bolt right up to the existing flange or did you have to weld it on?

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

there are different types of tial i believe... i heard that one of the tial bov is loud and DEEP not like the type s.. getting tired of the type s bov already james?
michael

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269

well, it bolted up to the hrc bov flange when i was stage 1, but in that video, that is the home-made fmic piping, so a friend of mine welded the flange to the piping

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

I heard the tial is only good for higer boost applications, i heard that it is not so responsive at 9 psi? is that correct
lates
james

Rest In Peace Heidi Doggy

does the bov sound louder the more boost you run? would a stage 1 have a lower sounding bov than a stage 2 or 3+?

www.artexmusic.com

97' grey gs/Greddy EVO catback/Greddy header/AEM cai/afx udp/dropped on 2" sprints