Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 2 Users in Chat
Top 2GNT Technical Turbo/Nitrous Tech topic #14813
View in linear mode

Subject: "blow off valve not blowing off help" Previous topic | Next topic
pn0ymahalFeb-01-02 05:34 PM
Donating 2GNT member
2621 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#14813, "blow off valve not blowing off help"




          

i checked all pipings and they are all tight no leak from that. also checked vacuum line from bov on it looks good... the problem is when i rev it up and let go my car or bov makes this tiss tiss tiss tiss or ta ta ta ta or whatever sound you wanna do! also no air blows out from the bov when i let go? i have the greddy type s bov and i have not adjust it soft or hard since it was set so it should not effect anything? also for your info i have a 99gs eclipse with the hrc kit mostly at idle in gear my vacuum is at 15 now its like at 8? the car goes into boost etc... could my greddy type s bov be bad ? or do i need to adjust soft to hard and if so what does soft and hard mean also? is it bad to drive it or go into boost like this? and could anything be bad internally ?
thanks
Michael 99gs- hrc stage 2

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

KoryFeb-01-02 06:11 PM
Old School 2GNTer
2620 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#14814, "RE: blow off valve not blowing off help"
In response to Reply # 0


          

u posted on the socali dsm list on yahoo too... check ur lines... i think u hooked up the line from tb to lower type S nipple... uhh... u have a 4g63 or 420a?


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, greddy sp exhaust, afx pulley, B&M sS, magecores & NGKs, S-AFC, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 10 degrees Frank 2 w/47trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, and free mods. To all the haters _|_ tia

The Original 2GNT []D[][]Y[][]D


96 RS


97 GSX

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
KoryFeb-01-02 06:11 PM
Old School 2GNTer
2620 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#14815, "RE: blow off valve not blowing off help"
In response to Reply # 1


          

uh belay that... mite be diff wif 420a


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, greddy sp exhaust, afx pulley, B&M sS, magecores & NGKs, S-AFC, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 10 degrees Frank 2 w/47trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, and free mods. To all the haters _|_ tia

The Original 2GNT []D[][]Y[][]D


96 RS


97 GSX

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
HadesOmegaFeb-01-02 07:47 PM
Old School 2GNTer
4529 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#14816, "RE: blow off valve not blowing off help"
In response to Reply # 2


          

your suppose to connect it to the intake manifod, hehe found that out the hard way. Do this when you rev the engine using the throttle spring put you hand over the outlet of the BOV and if air comes out it's working. Mine does it, you just can't hear it.


http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

            
pn0ymahalFeb-02-02 04:06 AM
Donating 2GNT member
2621 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#14817, "RE: blow off valve not blowing off help"
In response to Reply # 3




          

its ok now found out i had a hole in my vacuum from the bov to one of my T... she back and blowing off =)
Michael 99gs- hrc stage 2

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Turbo/Nitrous Tech topic #14813 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.061 seconds, executing 22 queries.