I am looking to build up my own kit. I am curious as to what external wastegate i should get, i was thinking the Deltagate Mark II like the Star has. seems to be not so bad in price and working well for them. Any opinions on TiAL? or HKS?

Original 15 of 2gnt.com

tial looks nicer imo

-bryan
'98 rst

ya'll dont know nothing about wastegates huh? LoL

Original 15 of 2gnt.com

sean,

delta wastegates are a joke... seriously all the better racers use tial... if u are going all out then go with tial... no doubt... or if u want something under 300hp a delta pissgate is ok


96RS ~ full 99GS Special Edit. body conversion, aem cai, greddy header, greddy sp exhaust, afx pulley, B&M sS, magecores & NGKs, S-AFC, A/F and Volt guages, Sparco Torino Seat, illuminas, prokits, ingalls camber, gunmetal GS rims, ST Sways, STBs, lower rear tie bar, Sony Xplode head, Xplode 10 disk, Boston Components, 2 Kenwood amps, 12" MTX sub, a shit load more.


97GSX ~ 18psi~ Ported/Clipped 10 degrees Frank 2 w/47trim, Ported Exh. housing, Tial 40mm External Wastegate with discharge tube, Ported O2 housing, 3" downpipe, 3" Straight Pipe, Apex N1, fake cat, K&N FIPK, Greddy IC Piping, Type S bov, S-AFC, Profec B, Greddy TT, Slimline Fan, RRE Catch Can, Greddy Big FMIC, ND 660s, Walboro 190lph, ACT 2600 w/street disk, clutch SS line, lighten flywheel, removed cruise control line, Greddy EGT, Coolant, Boost Gauges, motor mount inserts, Magnecor & plugs, greddy oil cap, greddy radiator cap, and free mods. To all the haters _|_ tia

The Original 2GNT []D[][]Y[][]D


96 RS


97 GSX

Greg's delta wastgate works prety well with his 12.8 second runs.

Dave
05 Ford F150 SuperCrew FX4

Kory, you think i should go w/ the 40mm or the 46mm? i plan on using the t3/4E -50 and in the begining 7-12psi and later on 18-22+

Original 15 of 2gnt.com

Hehe get an HKS wastegate those look badass. Delta gates aren't bad, they're cheap, Turbonetics all the way bwahahhaa, you can get them in different sizes I believe as well. Haha amazing how that metalic sticker stays on that thing. Man I still gotta weld that darn dumpipe into the downpipe though, haha now that I think of it I don't even noticed the wastegate sound anymore!

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

Kory please:

Racers dont use Deltagates because if you took a minute to think about it they are only 35mm. Not designed to be used in applications above 400hp. You dont see any racers using 35mm tials either. You do see racers using Turbonetics Racegates on 7 second purto rican drag cars.
When race cars were only making 300hp you saw plenty of Deltagates.

Tial does have a good reputation but Deltagates work just fine. Tial 35mm uses the same flanges and is the same size and roughly the same price. You choose. If you want something bigger than 35mm Tial makes a 40mm and the small HKS is also 40mm. They both cost more so if you dont need a 40mm wastagate dont bother.

:farfrommugen:
Yes I still own a 2gnt.
Damn right I've been here longer than U
klassic_liven@yahoo.com