http://www.neon-owners.org/neon/tech/howto_files/24DOHC_conversion.html


now who's going to try it in a 2gnt?

_________________
Vinnie Lima
vlima@csc.com
AIM: Kiku888
1997 Chrysler Sebring "Silver XTC"
I4 420a w/ HRC Stage 2.45 w/ FMIC
14.7@97 mph@6psi
Proud member of the
ASOG BoOsT JuNkIe Crew

I would love to. . . gotta get me 2.0L running right first. . . maybe. . .



current status unknown

http://hometown.aol.com/ohshootuhh/

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Drop in K&N Filter and open airbox
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

hmm good thing I found this. anybody done this yet? If all goes well I will be doing it at the end of summer }>

Slacker Motorsports
Some stuff......

Well there has been 1 person that might have done it but thats a long story.........

This would be very tempting..

Thanks Kiku!

------------------------------------------------
98 ESi
95 GS

>Well there has been 1 person that might have done it but
>thats a long story.........



Hmm. . . who could that be?




current status unknown

http://hometown.aol.com/ohshootuhh/

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Drop in K&N Filter and open airbox
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

sorry guys..im kinda retarded...but...if i did this could i still use a hahn turbo kit??


'95 Eclipse RS
INTERIOR
-Sony CDXM 750
-2 JL Audio 12w0 subs
-Premiere Amp
-CompuStar 2WAS Alarm with Remote Start and Pager
EXTERIOR
-Enkei 15" wheels (came with the car)
-2nd Generation Altezza Tails
-Clear Bumper Lenses
-APC Speed Glo Mirrors (with turn signals)
-Red LED Washer Nozzles
PERFORMANCE
-K&N Filter

>>Well there has been 1 person that might have done it but
>>thats a long story.........
>
>
>
>Hmm. . . who could that be?
>
jus some bitch ass crook who had everybody fooled, i'll bet.

jZa
IHS # fo-six-fo-six

"real men don't ride stick"

he is crooked but he knew his shit which i gotta give him.

Original 15 of 2gnt.com

All I have to say is good luck. Considering how your motors are completely backwards from the neon and any vehicle that comes with a factory 2.4. I have a 2.4 in my neon and it is alot of work. Seems like it would be more trouble than it is worth in an eclipse. All the time and money you put into that, you can have a crazy 500-600 horse 2.0. I guess if you have more money than you know what to do with, it might be possible. Later

well, if it is who I think it is, at least my tie bar money went to a good cause. (that dude sucks)

A.D.P.
bring it on............

A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on...........

Good info, The way I have things planned out a stroker or 2.4L swap would be after a TEC-III install so the wiring is not a problem.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

We are studying the 2.0 to 2.4 swap as I type. The siren song of 20% more displacement is just too much to resist! As much as I love the 2.0 420A, with our 2.0 RS we have run mid 11's without nitrous, and put over 500 HP to the wheels with nitrous. I feel that shows quite a lot about the engine's potential in 2.0 liter form. I am now ready to move on to the next logical step, as there is no replacement for displacement!

Just as a comparison, for you folks who are V8 aware: the difference in displacement between a 2.0 and a 2.4 is the same as comparing a 350 Chev to a 427 Chev. Yes, the 2.4 is our 'big block'!

I can't predict at this point when we will have all the answers, or even whether we will ultimately provide a 'swap kit' to you 2GNT folks, but I just wanted to let you know that this conversion is being examined closely by us. Stay tuned!

420A Forever,
Bill Hahn Jr.

Bill Hahn Jr.
98 RS Turbo: 10.87 @ 136 MPH
HRC Stage V with N20
Nation's Fastest Street FWD 2G DSM
www.turbosystem.com

You guys KICK ASS! Keep up the R&D on the RS platform!



______________________________
current status unknown

http://hometown.aol.com/ohshootuhh/

Perf:
KYB AGX Struts
Neuspeed Sport Springs
5 Strut Bars (2 F/U, F/L, R/U, R/L)
Sprint Front Camber Kit
$15 Rear Camber Kit
Corbin's A/F Gauge
MSD DIS-2 Ignition System
Some Regrind Cams that need High Compression (which I don't have)
Ported Intake Manifold
Ported Throttle Body
Drop in K&N Filter and open airbox
Custom 2 1/2 inch exhaust with Dual DTM Muffler
Empty Catalytic Convertor
Energy Suspension Motor Mount inserts
Hurricane_GS Short Shifter
Symborsky Shift Kit
Clutchmasters Stage 3 Modular
225/50/16inch Wheels and Tires


Audio:
Alpine CD Head Unit
Alpine Flex4 25W X 4 for Fronts and Rears
Alpine V-12 450W X 1 for Subs
Infinity Reference Series 5 1/4 and 1 inch tweeter component systems for fronts and rears
Blaupunkt 3 way 6x9's in the rears
3 MTX 5000 10" 12 ohm subs running 4 ohms mono

Flame Red SRT-4 GT40,8.5:1 Built Shortblock, Brian Crower Stage 2 Cams, etc etc etc...

Outstanding Bill!!!

Not even a 350 to 383... 350 to 427 I like that ratio much better!

I'd love to see a kit out for the conversion.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold 1/2, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, Crane Ignition Amp

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.