im installing one of mikes fcd's and ive double checked all my wiring from the instructions that came with it. It seems that if i hook it up the way that the instructions say, the voltage will stay between about 1.06 and 1.47. If i switch the voltmeter so that the red lead is on the yellow and green wire the volts will fluctuate from around4.98 or so all the way down to under 4.40 or so while turning the screw. So im kind of lost, im sure the instructions are proper because everyone that has revived the fcd has the same instructions and have not had issues with this. but im kinda wondering about the 1.47 volts coming from the map signal. should it be around this? it doesnt move at all while blowing into the sensor aswell. Should i swap sensors to see if that helps? thanks.
Thank you mobil one for rust proofing my driveway.
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#107452, "RE: fcd install trouble" In response to Reply # 4
Originally posted by Hedge I found the issue. turns out im an idiot and dont know how to use a multimeter, i didnt have it on dc so i was not getting the proper readings.
#107453, "RE: fcd install trouble" In response to Reply # 5
Originally posted by eclipse982nrRST
Originally posted by Hedge I found the issue. turns out im an idiot and dont know how to use a multimeter, i didnt have it on dc so i was not getting the proper readings.
lmao. Probably the same problem with Mikey.
no, it was on DC. haven't messed with it. the car's not currently in my hands right now. I have bigger car issues right now. Right terry?
Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim
#107454, "RE: fcd install trouble" In response to Reply # 6
Originally posted by 420agreenvilleSC
Originally posted by eclipse982nrRST
Originally posted by Hedge I found the issue. turns out im an idiot and dont know how to use a multimeter, i didnt have it on dc so i was not getting the proper readings.
lmao. Probably the same problem with Mikey.
no, it was on DC. haven't messed with it. the car's not currently in my hands right now. I have bigger car issues right now. Right terry?
Search
Printer-friendly copy
0 Users in Chat
