| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | fcd install trouble |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i8&topic_id=107422 |
107422, fcd install trouble
Posted by Hedge, Nov-07-09 02:58 PM
im installing one of mikes fcd's and ive double checked all my wiring from the instructions that came with it. It seems that if i hook it up the way that the instructions say, the voltage will stay between about 1.06 and 1.47. If i switch the voltmeter so that the red lead is on the yellow and green wire the volts will fluctuate from around4.98 or so all the way down to under 4.40 or so while turning the screw. So im kind of lost, im sure the instructions are proper because everyone that has revived the fcd has the same instructions and have not had issues with this. but im kinda wondering about the 1.47 volts coming from the map signal. should it be around this? it doesnt move at all while blowing into the sensor aswell. Should i swap sensors to see if that helps? thanks.
|
107423, RE: fcd install trouble
Posted by 420agreenvilleSC, Nov-07-09 06:52 PM
i was having the same issue. no solution yet.
|
107424, RE: fcd install trouble
Posted by Hedge, Nov-08-09 03:57 PM
Originally posted by 420agreenvilleSC
i was having the same issue. no solution yet.
what did you do about it?
|
107426, RE: fcd install trouble
Posted by 420agreenvilleSC, Nov-08-09 10:23 PM
nothing. lol. I dont drive my 2g daily.
|
107451, RE: fcd install trouble
Posted by Hedge, Nov-18-09 01:15 PM
I found the issue. turns out im an idiot and dont know how to use a multimeter, i didnt have it on dc so i was not getting the proper readings.
|
107452, RE: fcd install trouble
Posted by eclipse982nrRST, Nov-18-09 03:29 PM
Originally posted by Hedge
I found the issue. turns out im an idiot and dont know how to use a multimeter, i didnt have it on dc so i was not getting the proper readings.
lmao. Probably the same problem with Mikey.
|
107453, RE: fcd install trouble
Posted by 420agreenvilleSC, Nov-18-09 04:50 PM
Originally posted by eclipse982nrRSTOriginally posted by Hedge I found the issue. turns out im an idiot and dont know how to use a multimeter, i didnt have it on dc so i was not getting the proper readings. lmao. Probably the same problem with Mikey.
no, it was on DC. haven't messed with it. the car's not currently in my hands right now. I have bigger car issues right now. Right terry?
|
107454, RE: fcd install trouble
Posted by eclipse982nrRST, Nov-18-09 08:13 PM
Originally posted by 420agreenvilleSCOriginally posted by eclipse982nrRST Originally posted by Hedge I found the issue. turns out im an idiot and dont know how to use a multimeter, i didnt have it on dc so i was not getting the proper readings. lmao. Probably the same problem with Mikey. no, it was on DC. haven't messed with it. the car's not currently in my hands right now. I have bigger car issues right now. Right terry?
I can only imagine.
|