2GNT.com Forums - Viewing topic - 420a turbo manifold almost done.......

Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers

Printer-friendly copy

0 Users in Chat

Turbo/Nitrous Tech

topic #105723

View in linear mode

Subject: "420a turbo manifold almost done......."

Previous topic | Next topic

AMM	Jan-26-09 07:48 PM
Member since Aug 27th 2007 86 posts,

#105723, "420a turbo manifold almost done......."
Jan-26-09 07:49 PM by AMM

ill probably have pics up later tonight but heres the story........ a mamber on tuners wanted me to build him a new turbo manifold for his already boosted 2gn talon. i already built him an intake mnaifold so now he just waiting on the exhaust side of things. i didnt have a mock up car and he wanted it to be the same positioning as his current manifold so the DP wouldnt have to be modded so he pulled it off and jigged it up and sent me the jig to build the manifold on. well its finally all tacked up and ready to weld. hes runneing a t3 hot side with a synapse 40mm wastegate. so in a few hours i hope to have pics up for all to see. this post is on tuners and 2gnt so let me know what u think (as soon as pics are up of course)

mike

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

RE: 420a turbo manifold almost done......., taclipse, Jan-26-09 07:51 PM, #1

RE: 420a turbo manifold almost done......., AMM, Jan-26-09 08:05 PM, #2

RE: 420a turbo manifold almost done......., taclipse, Jan-26-09 08:27 PM, #3

RE: 420a turbo manifold almost done......., AMM, Jan-27-09 12:03 AM, #4

RE: 420a turbo manifold almost done......., eclipse982nrRST, Jan-27-09 04:40 AM, #5

RE: 420a turbo manifold almost done......., Moderator

Moderator

cs82685, Jan-27-09 04:59 AM, #6

RE: 420a turbo manifold almost done......., eclipse982nrRST, Jan-27-09 05:47 AM, #7

RE: 420a turbo manifold almost done......., djtrickee, Jan-27-09 11:09 AM, #8

RE: 420a turbo manifold almost done......., eclipse982nrRST, Jan-27-09 03:46 PM, #9

RE: 420a turbo manifold almost done......., ThePerfectShift, Jan-27-09 05:03 PM, #10

RE: 420a turbo manifold almost done......., 1slw97, Jan-27-09 06:00 PM, #11

RE: 420a turbo manifold almost done......., AMM, Jan-27-09 07:06 PM, #12

RE: 420a turbo manifold almost done......., 1slw97, Jan-27-09 07:24 PM, #13

RE: 420a turbo manifold almost done......., eclipse982nrRST, Jan-27-09 07:27 PM, #14

RE: 420a turbo manifold almost done......., taclipse, Jan-27-09 10:00 PM, #15

RE: 420a turbo manifold almost done......., AMM, Jan-27-09 10:19 PM, #16

RE: 420a turbo manifold almost done......., eclipse982nrRST, Jan-28-09 04:39 AM, #17

RE: 420a turbo manifold almost done......., Cyexmaster, Jan-29-09 09:10 PM, #18

RE: 420a turbo manifold almost done......., AMM, Jan-29-09 10:13 PM, #19

RE: 420a turbo manifold almost done......., eclipse982nrRST, Jan-30-09 06:26 AM, #20

RE: 420a turbo manifold almost done......., Cyexmaster, Jan-30-09 05:23 PM, #21

RE: 420a turbo manifold almost done......., taclipse, Jan-30-09 08:35 PM, #22

RE: 420a turbo manifold almost done......., PsychO, Jan-30-09 10:32 PM, #23

RE: 420a turbo manifold almost done......., eclipse982nrRST, Jan-31-09 06:18 AM, #24

RE: 420a turbo manifold almost done......., taclipse, Feb-01-09 08:20 PM, #25

RE: 420a turbo manifold almost done......., AMM, Feb-01-09 10:17 PM, #26

RE: 420a turbo manifold almost done......., barza21, Feb-02-09 12:44 AM, #27

RE: 420a turbo manifold almost done......., Moderator

Moderator

bullettdsm, Feb-02-09 04:52 AM, #28

RE: 420a turbo manifold almost done......., taclipse, Feb-02-09 05:44 AM, #29

RE: 420a turbo manifold almost done......., nrberndsen, Feb-02-09 07:54 AM, #30

RE: 420a turbo manifold almost done......., AMM, Feb-02-09 01:20 PM, #31

RE: 420a turbo manifold almost done......., eclipse982nrRST, Feb-02-09 02:24 PM, #32

RE: 420a turbo manifold almost done......., 1slw97, Feb-02-09 03:01 PM, #33

RE: 420a turbo manifold almost done......., Moderator

Moderator

bullettdsm, Feb-02-09 04:33 PM, #34

RE: 420a turbo manifold almost done......., AMM, Feb-02-09 10:04 PM, #35

RE: 420a turbo manifold almost done......., Moderator

Moderator

bullettdsm, Feb-03-09 01:40 PM, #36

RE: 420a turbo manifold almost done......., 96mitseclipsers, Feb-04-09 09:12 AM, #37

RE: 420a turbo manifold almost done......., 420agreenvilleSC, Feb-04-09 07:47 PM, #38

RE: 420a turbo manifold almost done......., Jungy, Feb-05-09 03:41 PM, #39

RE: 420a turbo manifold almost done......., taclipse, Feb-05-09 05:20 PM, #40

RE: 420a turbo manifold almost done......., AMM, Feb-05-09 07:39 PM, #41

RE: 420a turbo manifold almost done......., taclipse, Feb-09-09 09:21 AM, #42

RE: 420a turbo manifold almost done......., amskater, Feb-09-09 12:30 PM, #43

taclipse	Jan-26-09 07:51 PM
Member since Apr 12th 2004 200 posts,

#105724, "RE: 420a turbo manifold almost done......."
In response to Reply # 0

Originally posted by AMM
ill probably have pics up later tonight but heres the story........ a mamber on tuners wanted me to build him a new turbo manifold for his already boosted 2gn talon. i already built him an intake mnaifold so now he just waiting on the exhaust side of things. i didnt have a mock up car and he wanted it to be the same positioning as his current manifold so the DP wouldnt have to be modded so he pulled it off and jigged it up and sent me the jig to build the manifold on. well its finally all tacked up and ready to weld. hes runneing a t3 hot side with a synapse 40mm wastegate. so in a few hours i hope to have pics up for all to see. this post is on tuners and 2gnt so let me know what u think (as soon as pics are up of course) mike

pics look great Mike. did you have a chance to move that flange back?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

AMM	Jan-26-09 08:05 PM
Member since Aug 27th 2007 86 posts,

#105725, "RE: 420a turbo manifold almost done......."
In response to Reply # 1

i havent posted the pics yet........ who is this? this isnt amit is it? and yeah the flange is moved back about 3/16" im going to get some pics with a much better camera in a few hours here instead of posting up the camera phone pics.

mike

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

taclipse	Jan-26-09 08:27 PM
Member since Apr 12th 2004 200 posts,

#105726, "RE: 420a turbo manifold almost done......."
In response to Reply # 2

this is amit... lol my bad

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

AMM	Jan-27-09 12:03 AM
Member since Aug 27th 2007 86 posts,

#105727, "RE: 420a turbo manifold almost done......."
In response to Reply # 3

and heres the pics.....................

just gotta weld it together now.

mike

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

eclipse982nrRST	Jan-27-09 04:40 AM
Member since Mar 16th 2004 6314 posts,

#105728, "RE: 420a turbo manifold almost done......."
In response to Reply # 4

Looks nice. I am guessing that manifold is for Amit since that is exactly pretty much how his load out, design and all.

Looks great though, excellant craftsmanship as always from you.

Fuck, I cannot wait to get my tig fired up!

-MIKE-

Stroked 2.2L

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

cs82685	Jan-27-09 04:59 AM
Donating 2GNT member 2007 posts,

#105729, "RE: 420a turbo manifold almost done......."
In response to Reply # 5

Looks awesome

Originally posted by eclipse982nrRST
Looks nice. I am guessing that manifold is for Amit since that is exactly pretty much how his load out, design and all.

Well if you woulda read the thread you'd know that emoji

Originally posted by eclipse982nrRST
Fuck, I cannot wait to get my tig fired up!

Just because you have a brush doesn't mean you're an artist yet emoji

J/P mike I'd like to see what you come up with

I contributed to the Wiki!
EVO IX - just a really expensive boost gauge and a K&N air filter
96 Eclipse RS -awaiting registration and inspection
95 Eclipse GS - parts car
Mods/Profile - http://www.2gnt.com/index.php?d=cs82685

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

eclipse982nrRST	Jan-27-09 05:47 AM
Member since Mar 16th 2004 6314 posts,

#105730, "RE: 420a turbo manifold almost done......."
In response to Reply # 6

Originally posted by cs82685
Looks awesome

Originally posted by eclipse982nrRST Looks nice. I am guessing that manifold is for Amit since that is exactly pretty much how his load out, design and all.

Well if you woulda read the thread you'd know that emoji

Originally posted by eclipse982nrRST Fuck, I cannot wait to get my tig fired up!

Just because you have a brush doesn't mean you're an artist yet emoji

J/P mike I'd like to see what you come up with

He never said his name you geek

-MIKE-

Stroked 2.2L

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

djtrickee	Jan-27-09 11:09 AM
Donating 2GNT member 5924 posts,

#105731, "RE: 420a turbo manifold almost done......."
In response to Reply # 7

Originally posted by eclipse982nrRST

Originally posted by cs82685 Looks awesome

Originally posted by eclipse982nrRST Looks nice. I am guessing that manifold is for Amit since that is exactly pretty much how his load out, design and all.

Well if you woulda read the thread you'd know that emoji

Originally posted by eclipse982nrRST Fuck, I cannot wait to get my tig fired up!

Just because you have a brush doesn't mean you're an artist yet emoji

J/P mike I'd like to see what you come up with

He never said his name you geek

What? Maybe you need to learn to read...

Originally posted by taclipse
this is amit... lol my bad

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

eclipse982nrRST	Jan-27-09 03:46 PM
Member since Mar 16th 2004 6314 posts,

#105732, "RE: 420a turbo manifold almost done......."
In response to Reply # 8

Originally posted by djtrickee

Originally posted by eclipse982nrRST

Originally posted by cs82685 Looks awesome

Originally posted by eclipse982nrRST Looks nice. I am guessing that manifold is for Amit since that is exactly pretty much how his load out, design and all.

Well if you woulda read the thread you'd know that emoji

Originally posted by eclipse982nrRST Fuck, I cannot wait to get my tig fired up!

Just because you have a brush doesn't mean you're an artist yet emoji

J/P mike I'd like to see what you come up with

He never said his name you geek

What? Maybe you need to learn to read...

Originally posted by taclipse this is amit... lol my bad

Mike never said Amits name in the original post douche bag.

-MIKE-

Stroked 2.2L

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

ThePerfectShift	Jan-27-09 05:03 PM
Member since May 02nd 2006 199 posts,

#105733, "RE: 420a turbo manifold almost done......."
In response to Reply # 9

Awesome work man. You got skillz!!
Are we feeling a little hostile, Mike?

Originally posted by thedawg

I ran 15-18psi on my stock a604 for about 30k miles then it broke. It makes cool whining noises now.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

1slw97	Jan-27-09 06:00 PM
Member since Aug 13th 2008 129 posts,

#105734, "RE: 420a turbo manifold almost done......."
In response to Reply # 10

So, when will these be on the Market??

97 Eclipse GS, 2.2 stroker,Gt35R,MSNS,E85 @20psi. 450hp 370tq..With issues

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

AMM	Jan-27-09 07:06 PM
Member since Aug 27th 2007 86 posts,

#105735, "RE: 420a turbo manifold almost done......."
In response to Reply # 11

Originally posted by 1slw97
So, when will these be on the Market??

when ever somebody wants one........ they will vary slightly from this one cause the tubes will be pared differently but just note, this is a non a/c and p/s manifold according to amit.

mike

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

1slw97	Jan-27-09 07:24 PM
Member since Aug 13th 2008 129 posts,

#105736, "RE: 420a turbo manifold almost done......."
In response to Reply # 12

Originally posted by AMM

Originally posted by 1slw97 So, when will these be on the Market??

when ever somebody wants one........ they will vary slightly from this one cause the tubes will be pared differently but just note, this is a non a/c and p/s manifold according to amit. mike

pm'ed

97 Eclipse GS, 2.2 stroker,Gt35R,MSNS,E85 @20psi. 450hp 370tq..With issues

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

eclipse982nrRST	Jan-27-09 07:27 PM
Member since Mar 16th 2004 6314 posts,

#105737, "RE: 420a turbo manifold almost done......."
In response to Reply # 13

I like the idea of using the long radius 90*s Mike.

Curious as to what you use to make the nice cuts on the 45's, I notice you slimmed a couple of them down.

-MIKE-

Stroked 2.2L

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

taclipse	Jan-27-09 10:00 PM
Member since Apr 12th 2004 200 posts,

#105738, "RE: 420a turbo manifold almost done......."
In response to Reply # 14

Im just hoping that the usps guy didnt body slam my jig before delivering it to mike.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

AMM	Jan-27-09 10:19 PM
Member since Aug 27th 2007 86 posts,

#105739, "RE: 420a turbo manifold almost done......."
In response to Reply # 14

Originally posted by eclipse982nrRST
I like the idea of using the long radius 90*s Mike. Curious as to what you use to make the nice cuts on the 45's, I notice you slimmed a couple of them down.

i always use the long radius ones, ive never tried anything with the small radius bends but maybe i should get some for the future to try and use. as for cutting method......... i used a sawzall, chop saw and bad saw.

mike

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

eclipse982nrRST	Jan-28-09 04:39 AM
Member since Mar 16th 2004 6314 posts,

#105740, "RE: 420a turbo manifold almost done......."
In response to Reply # 16

Originally posted by AMM

Originally posted by eclipse982nrRST I like the idea of using the long radius 90*s Mike. Curious as to what you use to make the nice cuts on the 45's, I notice you slimmed a couple of them down.

i always use the long radius ones, ive never tried anything with the small radius bends but maybe i should get some for the future to try and use. as for cutting method......... i used a sawzall, chop saw and bad saw. mike

That should be my next investment, a decent band saw for metal cutting.

-MIKE-

Stroked 2.2L

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Cyexmaster	Jan-29-09 09:10 PM
Member since Nov 27th 2007 324 posts,

#105745, "RE: 420a turbo manifold almost done......."
In response to Reply # 12

Originally posted by AMM

Originally posted by 1slw97 So, when will these be on the Market??

when ever somebody wants one........ they will vary slightly from this one cause the tubes will be pared differently but just note, this is a non a/c and p/s manifold according to amit. mike

Look really nice! how much would a mani cost? T3 with a 38mm WG flange
and clearance for a/c and p/s

Status- Need to do break-in...

Try not to challenge me, I'd rather tie up than lose. Either way you NEVER WIN.... - Me..

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

AMM	Jan-29-09 10:13 PM
Member since Aug 27th 2007 86 posts,

#105746, "RE: 420a turbo manifold almost done......."
In response to Reply # 18

pricing is gonna be 700.00 shipped. i still gotta see what needs to be adjusted to fit the a/c and p/s though.

mike

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

eclipse982nrRST	Jan-30-09 06:26 AM
Member since Mar 16th 2004 6314 posts,

#105747, "RE: 420a turbo manifold almost done......."
In response to Reply # 19

Originally posted by AMM
pricing is gonna be 700.00 shipped. i still gotta see what needs to be adjusted to fit the a/c and p/s though. mike

If you ran the wastegate on the other side, it should fit with ac and ps.

Any finished pics yet sir?

-MIKE-

Stroked 2.2L

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Cyexmaster	Jan-30-09 05:23 PM
Member since Nov 27th 2007 324 posts,

#105748, "RE: 420a turbo manifold almost done......."
In response to Reply # 20

Originally posted by eclipse982nrRST

Originally posted by AMM pricing is gonna be 700.00 shipped. i still gotta see what needs to be adjusted to fit the a/c and p/s though. mike

If you ran the wastegate on the other side, it should fit with ac and ps. Any finished pics yet sir?

Yes it should fit but maybe a tad shorter and pointing downward a bit.

Also I noticed that the head flange has no space between ports, I think that should be added to leave a lil room for the thermal expansion of the material.

Status- Need to do break-in...

Try not to challenge me, I'd rather tie up than lose. Either way you NEVER WIN.... - Me..

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

taclipse	Jan-30-09 08:35 PM
Member since Apr 12th 2004 200 posts,

#105749, "RE: 420a turbo manifold almost done......."
In response to Reply # 21

Originally posted by Cyexmaster

Originally posted by eclipse982nrRST

Originally posted by AMM pricing is gonna be 700.00 shipped. i still gotta see what needs to be adjusted to fit the a/c and p/s though. mike

If you ran the wastegate on the other side, it should fit with ac and ps. Any finished pics yet sir?

Yes it should fit but maybe a tad shorter and pointing downward a bit. Also I noticed that the head flange has no space between ports, I think that should be added to leave a lil room for the thermal expansion of the material.

With the wastegate on the other side it wont clear a 3" downpipe. Here is a pic with my bojangles mounted to give you an idea. This new manifold should be pretty damn similar... atleast i hope lol

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

PsychO	Jan-30-09 10:32 PM
Member since Jun 10th 2004 166 posts,

#105750, "RE: 420a turbo manifold almost done......."
In response to Reply # 22
Jan-31-09 12:17 AM by PsychO

Well, it's definitely going to look better.

I would like a manifold that helps situate the compressor wheel on the passenger side of the manifold as opposed to the drivers side.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

eclipse982nrRST	Jan-31-09 06:18 AM
Member since Mar 16th 2004 6314 posts,

#105751, "RE: 420a turbo manifold almost done......."
In response to Reply # 23

Holy sweet jesus those welds are scary! lol.

-MIKE-

Stroked 2.2L

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

taclipse	Feb-01-09 08:20 PM
Member since Apr 12th 2004 200 posts,

#105755, "RE: 420a turbo manifold almost done......."
In response to Reply # 24

im suprised @ how well its been holding up. I tacked the manifold together and my neighbor welded it.... it was cheap lol

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

AMM	Feb-01-09 10:17 PM
Member since Aug 27th 2007 86 posts,

#105756, "RE: 420a turbo manifold almost done......."
In response to Reply # 25

its done............

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

barza21	Feb-02-09 12:44 AM
Member since Oct 09th 2006 313 posts,

#105757, "RE: 420a turbo manifold almost done......."
In response to Reply # 26

what would the fitment look like with a gt35r (.70 A/R)? will it fit good?? and what are the chances of getting one with divided exhaust flange??

Thanks

I wish I had blown it, believe me, I do...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

bullettdsm	Feb-02-09 04:52 AM
Donating 2GNT member 2676 posts,

#105758, "RE: 420a turbo manifold almost done......."
In response to Reply # 26

Originally posted by AMM
its done............

'Bout time emoji

As usual, excellent work Mr Mike. She looks great. Now let's see fitment (um, whoever is putting this on - I forgot and don't feel like looking back, lol).

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

taclipse	Feb-02-09 05:44 AM
Member since Apr 12th 2004 200 posts,

#105759, "RE: 420a turbo manifold almost done......."
In response to Reply # 28

I'm not too sure on a 35r.....the 3076r is a pretty tight fit as it is. I would go top mount with a 35r. I will post results on fitment as soon as it is in my hands. Mike- that looks great¡

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

nrberndsen	Feb-02-09 07:54 AM
Member since Sep 13th 2006 36 posts,

#105760, "RE: 420a turbo manifold almost done......."
In response to Reply # 29

very nice work looking forward to seeing it all mounted up!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

AMM	Feb-02-09 01:20 PM
Member since Aug 27th 2007 86 posts,

#105762, "RE: 420a turbo manifold almost done......."
In response to Reply # 30

i like topmounts personally, i should see about doing them instead of the bottom mount. what u guys think....... top or bottom mount?

mike

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

eclipse982nrRST	Feb-02-09 02:24 PM
Member since Mar 16th 2004 6314 posts,

#105765, "RE: 420a turbo manifold almost done......."
In response to Reply # 31

Originally posted by AMM
i like topmounts personally, i should see about doing them instead of the bottom mount. what u guys think....... top or bottom mount? mike

I love top mounts, hense my new manifold pictured in my sig below emoji

-MIKE-

Stroked 2.2L

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

1slw97	Feb-02-09 03:01 PM
Member since Aug 13th 2008 129 posts,

#105767, "RE: 420a turbo manifold almost done......."
In response to Reply # 32

Top!!!

97 Eclipse GS, 2.2 stroker,Gt35R,MSNS,E85 @20psi. 450hp 370tq..With issues

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

bullettdsm	Feb-02-09 04:33 PM
Donating 2GNT member 2676 posts,

#105769, "RE: 420a turbo manifold almost done......."
In response to Reply # 31

Originally posted by AMM
....... top or bottom mount? mike

Um......I'm a bottom guy, but I like to take it on the end too. Provided it fits emoji

I guess that's the most important part

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

AMM	Feb-02-09 10:04 PM
Member since Aug 27th 2007 86 posts,

#105772, "RE: 420a turbo manifold almost done......."
In response to Reply # 34

Originally posted by bullettdsm

Originally posted by AMM ....... top or bottom mount? mike

Um......I'm a bottom guy, but I like to take it on the end too. Provided it fits emoji

I guess that's the most important part

i knew something like that was coming lol, did u have a typo there mark?

mike

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

bullettdsm	Feb-03-09 01:40 PM
Donating 2GNT member 2676 posts,

#105775, "RE: 420a turbo manifold almost done......."
In response to Reply # 35

Originally posted by AMM

Originally posted by bullettdsm

Originally posted by AMM ....... top or bottom mount? mike

Um......I'm a bottom guy, but I like to take it on the end too. Provided it fits emoji

I guess that's the most important part

i knew something like that was coming lol, did u have a typo there mark? mike

No typo.

Well, you knew someone had to say it

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

96mitseclipsers	Feb-04-09 09:12 AM
Member since Jan 12th 2009 47 posts,

#105776, "RE: 420a turbo manifold almost done......."
In response to Reply # 36

looks good.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

420agreenvilleSC	Feb-04-09 07:47 PM
Donating 2GNT member 1527 posts,

#105778, "RE: 420a turbo manifold almost done......."
In response to Reply # 37

those welds are incredibly clean. Im seriously considering this if fitment is ok w/ a 35r

___________________________________________

http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Jungy	Feb-05-09 03:41 PM
Member since Nov 09th 2005 164 posts,

#105783, "RE: 420a turbo manifold almost done......."
In response to Reply # 38

I believe taclipse is running a gt3076r with the e cover on it so fitment w/ a 35r is just a matter of if the s cover on the 35r would have enough room to clear the radiator.

96' eclipse gs, 2gb conversion
built bottom end, crane #16 cams, hx40 pro billet, MS1 v3 MSn'S-E, 3.55 trans, quaife lsd

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

taclipse	Feb-05-09 05:20 PM
Member since Apr 12th 2004 200 posts,

#105784, "RE: 420a turbo manifold almost done......."
In response to Reply # 39

I am running a gt3076r with the 4" inlet (antisurge housing) and 2.5" outlet. i belive it is an s cover.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

AMM	Feb-05-09 07:39 PM
Member since Aug 27th 2007 86 posts,

#105786, "RE: 420a turbo manifold almost done......."
In response to Reply # 40

then thats the same size as the "standard" 35r........ so i guess it will fit it. once welded up it was actually about 1/2" further back then the 3/16" i originally said so i hope thats not going to a be a problem. what was the clearnce from the block Amid?

mike

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

taclipse	Feb-09-09 09:21 AM
Member since Apr 12th 2004 200 posts,

#105801, "RE: 420a turbo manifold almost done......."
In response to Reply # 41

when I ran a stock atx radiator I had about 3/4" clearance. Once i upgraded to the visteon is when i had an issue, I dont even have a 1/4" clearance with the radiator... thanks god for solid mounts! I have about 3/4"-1" clearance from the compressor housing to the starter. If fitment is on point people shouldnt have a problem running these with stock radiators.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

amskater	Feb-09-09 12:30 PM
Member since Nov 19th 2007 44 posts,

#105803, "RE: 420a turbo manifold almost done......."
In response to Reply # 42

damn that manifold looks great good job

www.myspace.com/dougdesautels

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Top

Turbo/Nitrous Tech

topic #105723

Previous topic | Next topic

Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com

Generated in 0.084 seconds, executing 100 queries.