ill probably have pics up later tonight but heres the story........ a mamber on tuners wanted me to build him a new turbo manifold for his already boosted 2gn talon. i already built him an intake mnaifold so now he just waiting on the exhaust side of things. i didnt have a mock up car and he wanted it to be the same positioning as his current manifold so the DP wouldnt have to be modded so he pulled it off and jigged it up and sent me the jig to build the manifold on. well its finally all tacked up and ready to weld. hes runneing a t3 hot side with a synapse 40mm wastegate. so in a few hours i hope to have pics up for all to see. this post is on tuners and 2gnt so let me know what u think (as soon as pics are up of course)


mike

Originally posted by AMM
ill probably have pics up later tonight but heres the story........ a mamber on tuners wanted me to build him a new turbo manifold for his already boosted 2gn talon. i already built him an intake mnaifold so now he just waiting on the exhaust side of things. i didnt have a mock up car and he wanted it to be the same positioning as his current manifold so the DP wouldnt have to be modded so he pulled it off and jigged it up and sent me the jig to build the manifold on. well its finally all tacked up and ready to weld. hes runneing a t3 hot side with a synapse 40mm wastegate. so in a few hours i hope to have pics up for all to see. this post is on tuners and 2gnt so let me know what u think (as soon as pics are up of course) mike

pics look great Mike. did you have a chance to move that flange back?

i havent posted the pics yet........ who is this? this isnt amit is it? and yeah the flange is moved back about 3/16" im going to get some pics with a much better camera in a few hours here instead of posting up the camera phone pics.


mike

this is amit... lol my bad

and heres the pics.....................


















just gotta weld it together now.


mike

Looks nice. I am guessing that manifold is for Amit since that is exactly pretty much how his load out, design and all.

Looks great though, excellant craftsmanship as always from you.

Fuck, I cannot wait to get my tig fired up!

Looks awesome :thumbsup

Originally posted by eclipse982nrRST
Looks nice. I am guessing that manifold is for Amit since that is exactly pretty much how his load out, design and all.

Well if you woulda read the thread you'd know that :P

Originally posted by eclipse982nrRST
Fuck, I cannot wait to get my tig fired up!

Just because you have a brush doesn't mean you're an artist yet :D

J/P mike I'd like to see what you come up with

Originally posted by cs82685
Looks awesome :thumbsup

Originally posted by eclipse982nrRST Looks nice. I am guessing that manifold is for Amit since that is exactly pretty much how his load out, design and all.

Well if you woulda read the thread you'd know that :P

Originally posted by eclipse982nrRST Fuck, I cannot wait to get my tig fired up!

Just because you have a brush doesn't mean you're an artist yet :D J/P mike I'd like to see what you come up with

He never said his name you geek :thumbsup

Originally posted by eclipse982nrRST

Originally posted by cs82685 Looks awesome :thumbsup

Originally posted by eclipse982nrRST Looks nice. I am guessing that manifold is for Amit since that is exactly pretty much how his load out, design and all.

Well if you woulda read the thread you'd know that :P

Originally posted by eclipse982nrRST Fuck, I cannot wait to get my tig fired up!

Just because you have a brush doesn't mean you're an artist yet :D J/P mike I'd like to see what you come up with

He never said his name you geek :thumbsup

What? Maybe you need to learn to read...

Originally posted by taclipse
this is amit... lol my bad

Originally posted by djtrickee

Originally posted by eclipse982nrRST

Originally posted by cs82685 Looks awesome :thumbsup

Originally posted by eclipse982nrRST Looks nice. I am guessing that manifold is for Amit since that is exactly pretty much how his load out, design and all.

Well if you woulda read the thread you'd know that :P

Originally posted by eclipse982nrRST Fuck, I cannot wait to get my tig fired up!

Just because you have a brush doesn't mean you're an artist yet :D J/P mike I'd like to see what you come up with

He never said his name you geek :thumbsup

What? Maybe you need to learn to read...

Originally posted by taclipse this is amit... lol my bad

Mike never said Amits name in the original post douche bag.

Awesome work man. You got skillz!!
Are we feeling a little hostile, Mike?
:P

So, when will these be on the Market??

Originally posted by 1slw97
So, when will these be on the Market??

when ever somebody wants one........ they will vary slightly from this one cause the tubes will be pared differently but just note, this is a non a/c and p/s manifold according to amit.


mike

Originally posted by AMM

Originally posted by 1slw97 So, when will these be on the Market??

when ever somebody wants one........ they will vary slightly from this one cause the tubes will be pared differently but just note, this is a non a/c and p/s manifold according to amit. mike

pm'ed

I like the idea of using the long radius 90*s Mike.

Curious as to what you use to make the nice cuts on the 45's, I notice you slimmed a couple of them down.

Im just hoping that the usps guy didnt body slam my jig before delivering it to mike.

Originally posted by eclipse982nrRST
I like the idea of using the long radius 90*s Mike. Curious as to what you use to make the nice cuts on the 45's, I notice you slimmed a couple of them down.

i always use the long radius ones, ive never tried anything with the small radius bends but maybe i should get some for the future to try and use. as for cutting method......... i used a sawzall, chop saw and bad saw.


mike

Originally posted by AMM

Originally posted by eclipse982nrRST I like the idea of using the long radius 90*s Mike. Curious as to what you use to make the nice cuts on the 45's, I notice you slimmed a couple of them down.

i always use the long radius ones, ive never tried anything with the small radius bends but maybe i should get some for the future to try and use. as for cutting method......... i used a sawzall, chop saw and bad saw. mike

That should be my next investment, a decent band saw for metal cutting.

Originally posted by AMM

Originally posted by 1slw97 So, when will these be on the Market??

when ever somebody wants one........ they will vary slightly from this one cause the tubes will be pared differently but just note, this is a non a/c and p/s manifold according to amit. mike

Look really nice! how much would a mani cost? T3 with a 38mm WG flange
and clearance for a/c and p/s

pricing is gonna be 700.00 shipped. i still gotta see what needs to be adjusted to fit the a/c and p/s though.


mike

Originally posted by AMM
pricing is gonna be 700.00 shipped. i still gotta see what needs to be adjusted to fit the a/c and p/s though. mike

If you ran the wastegate on the other side, it should fit with ac and ps.

Any finished pics yet sir?

Originally posted by eclipse982nrRST

Originally posted by AMM pricing is gonna be 700.00 shipped. i still gotta see what needs to be adjusted to fit the a/c and p/s though. mike

If you ran the wastegate on the other side, it should fit with ac and ps. Any finished pics yet sir?

Yes it should fit but maybe a tad shorter and pointing downward a bit.

Also I noticed that the head flange has no space between ports, I think that should be added to leave a lil room for the thermal expansion of the material.

Originally posted by Cyexmaster

Originally posted by eclipse982nrRST

Originally posted by AMM pricing is gonna be 700.00 shipped. i still gotta see what needs to be adjusted to fit the a/c and p/s though. mike

If you ran the wastegate on the other side, it should fit with ac and ps. Any finished pics yet sir?

Yes it should fit but maybe a tad shorter and pointing downward a bit. Also I noticed that the head flange has no space between ports, I think that should be added to leave a lil room for the thermal expansion of the material.

With the wastegate on the other side it wont clear a 3" downpipe. Here is a pic with my bojangles mounted to give you an idea. This new manifold should be pretty damn similar... atleast i hope lol

Well, it's definitely going to look better.

I would like a manifold that helps situate the compressor wheel on the passenger side of the manifold as opposed to the drivers side.

Holy sweet jesus those welds are scary! lol.

im suprised @ how well its been holding up. I tacked the manifold together and my neighbor welded it.... it was cheap lol

its done............

what would the fitment look like with a gt35r (.70 A/R)? will it fit good?? and what are the chances of getting one with divided exhaust flange??

Thanks

Originally posted by AMM
its done............

'Bout time :P

As usual, excellent work Mr Mike. She looks great. Now let's see fitment (um, whoever is putting this on - I forgot and don't feel like looking back, lol).

I'm not too sure on a 35r.....the 3076r is a pretty tight fit as it is. I would go top mount with a 35r. I will post results on fitment as soon as it is in my hands. Mike- that looks great¡

very nice work looking forward to seeing it all mounted up!

i like topmounts personally, i should see about doing them instead of the bottom mount. what u guys think....... top or bottom mount?


mike

Originally posted by AMM
i like topmounts personally, i should see about doing them instead of the bottom mount. what u guys think....... top or bottom mount? mike

I love top mounts, hense my new manifold pictured in my sig below :)

Top!!!

Originally posted by AMM
....... top or bottom mount? mike

Um......I'm a bottom guy, but I like to take it on the end too. Provided it fits :shrug

I guess that's the most important part

Originally posted by bullettdsm

Originally posted by AMM ....... top or bottom mount? mike

Um......I'm a bottom guy, but I like to take it on the end too. Provided it fits :shrug I guess that's the most important part

i knew something like that was coming lol, did u have a typo there mark?



mike

Originally posted by AMM

Originally posted by bullettdsm

Originally posted by AMM ....... top or bottom mount? mike

Um......I'm a bottom guy, but I like to take it on the end too. Provided it fits :shrug I guess that's the most important part

i knew something like that was coming lol, did u have a typo there mark? mike

No typo.













Well, you knew someone had to say it :thumbsup

looks good.

those welds are incredibly clean. Im seriously considering this if fitment is ok w/ a 35r

I believe taclipse is running a gt3076r with the e cover on it so fitment w/ a 35r is just a matter of if the s cover on the 35r would have enough room to clear the radiator.

I am running a gt3076r with the 4" inlet (antisurge housing) and 2.5" outlet. i belive it is an s cover.

then thats the same size as the "standard" 35r........ so i guess it will fit it. once welded up it was actually about 1/2" further back then the 3/16" i originally said so i hope thats not going to a be a problem. what was the clearnce from the block Amid?


mike

when I ran a stock atx radiator I had about 3/4" clearance. Once i upgraded to the visteon is when i had an issue, I dont even have a 1/4" clearance with the radiator... thanks god for solid mounts! I have about 3/4"-1" clearance from the compressor housing to the starter. If fitment is on point people shouldnt have a problem running these with stock radiators.

damn that manifold looks great good job