Wath's up guys, dont flame me by the question ahaha

i want install a garett t3 on my 420a, the question is, it need a oil restrictor on feed line??



thanks guys

-----------------------------------
95 Eclipse GS+T.. Garrett t3
MEXICAN DSM 420A TURBO! 1/4 mile: 14.830 @ 6 psi 14.725@100 mph .. 9 psi & open pipe TRACTIONLESS
stock inj, stock mounts, 12:1 vortech fmu, bkr7s at .032", 93 oct, walbro 255, stock clutch.. etc

I HATE SR20DE
http://www.youtube.com/rettez

is it a ball bearing or a journal bearing?

the Garrett BB's WILL require one. the pass through hole should be .035" there is a -4AN adapter out there with a .035 hole already in it so you can just connect it right in line with your oil feed.
a old school option is to use nitrous jets and drop them in, but most people dont have a bunch of those lying around. so spend the $12 and get a proper adapter

______________________________________
______________________________________
"Don't fear the weapon, fear the soul of the warrior using it."
"My CEL only goes off when i remove my battery."

Best sum up of working on a 2GNT
DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."


Ahhhh Priceless . . .
eclipse982nrRST "its actually lightish red"
RoninEclipse2G "yeah, they already have a color for that... it's called PINK"

This is my turbo

-----------------------------------
95 Eclipse GS+T.. Garrett t3
MEXICAN DSM 420A TURBO! 1/4 mile: 14.830 @ 6 psi 14.725@100 mph .. 9 psi & open pipe TRACTIONLESS
stock inj, stock mounts, 12:1 vortech fmu, bkr7s at .032", 93 oct, walbro 255, stock clutch.. etc

I HATE SR20DE
http://www.youtube.com/rettez

your going to need to clock that turbo more. Or you ic piping will go into the motor

does it have a blue Serial # plate on the side of the CHRA?
get me a *Clear* picture of that and i can tell you for sure
from the looks id say yes its a BB CHRA and is also water cooled.

also as above said: you need to clock that turbo more bro

also WTF!? is up with that downpipe? serriously ther has got to be a better way to fab that man! if that is actually cast in to the exhaust housing then id say check ebay for a t3 with a v-band or at least a 4-bolt housing. that bend at the top is gonna serriously effect your exhaust flow.

______________________________________
______________________________________
"Don't fear the weapon, fear the soul of the warrior using it."
"My CEL only goes off when i remove my battery."

Best sum up of working on a 2GNT
DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."


Ahhhh Priceless . . .
eclipse982nrRST "its actually lightish red"
RoninEclipse2G "yeah, they already have a color for that... it's called PINK"

yes, it's the downpipe haha :$


so, if i need the oil restrictor?

-----------------------------------
95 Eclipse GS+T.. Garrett t3
MEXICAN DSM 420A TURBO! 1/4 mile: 14.830 @ 6 psi 14.725@100 mph .. 9 psi & open pipe TRACTIONLESS
stock inj, stock mounts, 12:1 vortech fmu, bkr7s at .032", 93 oct, walbro 255, stock clutch.. etc

I HATE SR20DE
http://www.youtube.com/rettez

http://www.atpturbo.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=ATP-OIL-021&Category_Code=GTBB

ATP also caries a whole bunch of exhaust components and install parts as well

______________________________________
______________________________________
"Don't fear the weapon, fear the soul of the warrior using it."
"My CEL only goes off when i remove my battery."

Best sum up of working on a 2GNT
DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."


Ahhhh Priceless . . .
eclipse982nrRST "its actually lightish red"
RoninEclipse2G "yeah, they already have a color for that... it's called PINK"

thanks!

if i make a oil restrictor, what hole size is the recommended for my setup?? .035 ?

garrett t3
fmic
stock injectors
fmu 12:1
walbro etc
etc

Thanks Foggy

-----------------------------------
95 Eclipse GS+T.. Garrett t3
MEXICAN DSM 420A TURBO! 1/4 mile: 14.830 @ 6 psi 14.725@100 mph .. 9 psi & open pipe TRACTIONLESS
stock inj, stock mounts, 12:1 vortech fmu, bkr7s at .032", 93 oct, walbro 255, stock clutch.. etc

I HATE SR20DE
http://www.youtube.com/rettez

yeppers

______________________________________
______________________________________
"Don't fear the weapon, fear the soul of the warrior using it."
"My CEL only goes off when i remove my battery."

Best sum up of working on a 2GNT
DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."


Ahhhh Priceless . . .
eclipse982nrRST "its actually lightish red"
RoninEclipse2G "yeah, they already have a color for that... it's called PINK"

www.tunertoys.zoovy.com

www.steathmodeperformance.com

I'm too lazy to check but one of those sites sells ADJUSTABLE oil restrictors.

Goodnight sweetheart...yes its time to go...bum bum bum bum bum...good night sweetheart yes I am one little a$$hole......bum bum bum bum....