I've been looking around for an exhaust manifold to piece together a kit. I want to run a turbonetics turbo without a waste gate. But all the manifolds i can find have a port for a wastegate. Is there an easy way to plug this? or do I have to run a waste gate? And I know older turbonetics manifolds dont have the wastegate port just cant find any.
#103082, "RE: Question about exhaust manifold" In response to Reply # 2
Did you mean to type "what would be a good FCD other then a missing link?" If thats what you meant to type then paul (VelocitaPaola) sells an electronic FCD. I've got one of his and haven't had any problems with it at all, really easy to install too.
#103085, "RE: Question about exhaust manifold" In response to Reply # 5 Mar-18-08 11:37 AM by paintballer92562
what is mike's screen name? and what would you guys suggest for another major gauge besides boost and wideband? i was leaning towards oil temp or pressure.
#103086, "RE: Question about exhaust manifold" In response to Reply # 6
Originally posted by paintballer92562 what is mike's screen name? and what would you guys suggest for another major gauge besides boost and wideband? i was leaning towards oil temp or pressure.
Oil pressure and EGT gauges should do it for you.
Mike D -------------------------------------------------------------------------------------------------
Originally posted by DR1665 You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.
#103090, "RE: Question about exhaust manifold" In response to Reply # 9
Originally posted by VelocitaPaola Which vacuum lines? This is how I had mine set up with just an FMU:
Thats the general idea I was looking for. I just need to learn the route from the FMU, BOV, and any other places it needs to go. So, from FMU to intake mani? and I can tap the bov into that line from the FMU? would that be all I would need to run besides the boost gauge?
This is really the only part out the turbo process that I'm light on.
#103093, "RE: Question about exhaust manifold" In response to Reply # 11
Alright. And would you know how to place in the air bleed valve that goes inline with the FMU vacuum line? It as a vacuum port but a screw in at the same time.
Search
Printer-friendly copy
0 Users in Chat
