2GNT.com Forums - Viewing topic - Everything installed. Need last minute tips before driving.

Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers

Printer-friendly copy

3 Users in Chat

Turbo/Nitrous Tech

topic #100010

View in linear mode

Subject: "Everything installed. Need last minute tips before driving."

Previous topic | Next topic

kedaigle	May-06-07 01:49 PM
Member since Nov 21st 2006 10 posts,

#100010, "Everything installed. Need last minute tips before driving."

Everything is installed for the turbo set-up and am ready to drive, but nervous as hell. I've unplugged the relays for the ignition and fuel pump and primed the oil lines. Radiator fluid filled. The car fired right up after I plugged the relays back in. I let it run for about ten minutes just to check for leaks and did not rev the motor. It looks fine. Is there anything else that I should do or look for before I take the thing on the road and is there anything that I should be doing on its maiden voyage? Thank you, 2GNT'ers. I've used this site as a guide to turbo'ing my ride and it has given me a tremendous base of knowledge to build upon.

Made it big 4 times to only have it taken away. Number five and waiting...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

RE: Everything installed. Need last minute tips before driving., Moderator

Moderator

cs82685, May-06-07 02:13 PM, #1

RE: Everything installed. Need last minute tips before driving., VelocitaPaola, May-06-07 02:22 PM, #2

RE: Everything installed. Need last minute tips before driving., mreigle, May-06-07 02:42 PM, #3

RE: Everything installed. Need last minute tips before driving., talon749, May-06-07 04:11 PM, #4

RE: Everything installed. Need last minute tips before driving., kedaigle, May-09-07 07:31 PM, #5

RE: Everything installed. Need last minute tips before driving., WickedESi, May-10-07 07:02 PM, #6

RE: Everything installed. Need last minute tips before driving., Moderator

Moderator

cs82685, May-11-07 03:25 AM, #7

RE: Everything installed. Need last minute tips before driving., jack_of_trades, May-11-07 07:25 AM, #8

RE: Everything installed. Need last minute tips before driving., mreigle, May-13-07 06:16 AM, #9

RE: Everything installed. Need last minute tips before driving., XMasta19, May-06-07 04:18 PM, #10

RE: Everything installed. Need last minute tips before driving., hs_elrod, May-06-07 04:56 PM, #11

RE: Everything installed. Need last minute tips before driving., WickedESi, May-06-07 05:05 PM, #12

RE: Everything installed. Need last minute tips before driving., totaleclipse_05, May-06-07 07:13 PM, #13

RE: Everything installed. Need last minute tips before driving., kedaigle, May-06-07 09:13 PM, #14

RE: Everything installed. Need last minute tips before driving., mreigle, May-07-07 01:24 AM, #15

RE: Everything installed. Need last minute tips before driving., mreigle, May-07-07 01:27 AM, #16

RE: Everything installed. Need last minute tips before driving., totaleclipse_05, May-07-07 05:42 AM, #17

RE: Everything installed. Need last minute tips before driving., kedaigle, May-06-07 08:40 PM, #18

RE: Everything installed. Need last minute tips before driving., mreigle, May-07-07 11:29 AM, #19

RE: Everything installed. Need last minute tips before driving., bigrob3232, May-07-07 12:05 PM, #20

RE: Everything installed. Need last minute tips before driving., bigrob3232, May-07-07 12:05 PM, #21

RE: Everything installed. Need last minute tips before driving., kedaigle, May-06-07 08:16 PM, #22

RE: Everything installed. Need last minute tips before driving., edxmon, May-07-07 07:16 AM, #23

cs82685	May-06-07 02:13 PM
Donating 2GNT member 2007 posts,

#100011, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 0

Hey looks good, a bit too much red for me, but I like what you did with the oil line, it's nice and clean. Oh and I see you've got the invisible strut bar also, I love mine it's awesome, lol.

If you checked everything out and seems good, just keep an eye on your gauges the first time you boost. Oh and if you have a fuel pressure gauge test to see if whatever you are using to raise fp (i'm assuming fmu b/c I don't see cartech or sfmu) is doing so by using an air compressor or simply blowing into the vac line you used for your source to fmu

I contributed to the Wiki!
EVO IX - just a really expensive boost gauge and a K&N air filter
96 Eclipse RS -awaiting registration and inspection
95 Eclipse GS - parts car
Mods/Profile - http://www.2gnt.com/index.php?d=cs82685

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

VelocitaPaola	May-06-07 02:22 PM
Member since Jun 13th 2005 626 posts,

#100012, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 1

Everything looks good. Congratulations on the install.

You might consider reconfiguring the intake a little; it looks restrictive.

-http://www.symtechlabs.com/-

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

mreigle	May-06-07 02:42 PM
Member since Jun 21st 2006 426 posts,

#100013, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 2

Nothing stand out from the pick except for a lack of FPR and the EVAP delete to blowout valve conversion.

More information about your build would help.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

talon749	May-06-07 04:11 PM
Member since Jul 13th 2005 421 posts,

#100014, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 3

looks good, I like the red, what is holding your battery down?

-Keith

'92 BMW 325i - 3.91 LSD....Cold air intake....M52 headers.....Track pipe....Remus back....Fan Delete....UUC short throw...M3 Clutch Flywheel & Drive Shaft...Tien Coil overs

I <3 the twisties

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

kedaigle	May-09-07 07:31 PM
Member since Nov 21st 2006 10 posts,

#100090, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 4

Originally posted by talon749
looks good, I like the red, what is holding your battery down?

Pre-turbo, I was driving around without one. Since your inquiry, I went ahead and fabricated one out of a piece of 1/8th aluminum diamond plate.

Made it big 4 times to only have it taken away. Number five and waiting...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

WickedESi	May-10-07 07:02 PM
Donating 2GNT member 3090 posts,

#100095, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 5

Nice bracket man, looks professional. It looks like you have only one wire (8 awg maybe?) grounding all those big positive cables? emoji

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

cs82685	May-11-07 03:25 AM
Donating 2GNT member 2007 posts,

#100102, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 6

That does look pretty damn good, it's so simple yet clean, nice

I contributed to the Wiki!
EVO IX - just a really expensive boost gauge and a K&N air filter
96 Eclipse RS -awaiting registration and inspection
95 Eclipse GS - parts car
Mods/Profile - http://www.2gnt.com/index.php?d=cs82685

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

jack_of_trades	May-11-07 07:25 AM
Member since Oct 30th 2005 217 posts,

#100103, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 7
May-11-07 07:00 PM by jack_of_trades

Its looking good man, just keep weeding out all of the little bugs in the setup.

Originally posted by mreigle
Also I had that oil breather filter and it worked great until I got boosted. Then it just started spraying oil on the engine. I would suggest an oil catch can. It won't effect the performance but I would hate to see some oil burnt on that throttle body.

I just had to replace my PCV valve, so I bought a new one at Autozone. Sure enough...same issue. So I pull the new pcv valve out and the check ball doesn't even seal up under pressure. So I went to the autoparts store, half of them didn't even seal up when positive air pressure was applied to intake side (I blew in them, which is about 1psi). I found another pcv valve that was of similar size to the factory one and it sealed up great when pressure was applied. No more oil on my firewall emoji

If you are boosting less than 10 psi and are spewing oil out of your breather filter, you either have seriously worn piston rings or your pcv valve isn't doing a good enough of a job.

Originally posted by mreigle I hope you have a bypass in that intake jsut in case you hit a puddle.

You can't install a bypass on a turbo setup, the suction is too great.

Jamie-
-AUTOMATIC turbo'd 95 Talon ESI@8psi (stock internals)14.0sec=1/4 mile

-2003 Mitsubishi Evo VIII

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

mreigle	May-13-07 06:16 AM
Member since Jun 21st 2006 426 posts,

#100120, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 8

Originally posted by jack_of_trades
Its looking good man, just keep weeding out all of the little bugs in the setup.

Originally posted by mreigle Also I had that oil breather filter and it worked great until I got boosted. Then it just started spraying oil on the engine. I would suggest an oil catch can. It won't effect the performance but I would hate to see some oil burnt on that throttle body.

I just had to replace my PCV valve, so I bought a new one at Autozone. Sure enough...same issue. So I pull the new pcv valve out and the check ball doesn't even seal up under pressure. So I went to the autoparts store, half of them didn't even seal up when positive air pressure was applied to intake side (I blew in them, which is about 1psi). I found another pcv valve that was of similar size to the factory one and it sealed up great when pressure was applied. No more oil on my firewall emoji

If you are boosting less than 10 psi and are spewing oil out of your breather filter, you either have seriously worn piston rings or your pcv valve isn't doing a good enough of a job.

Originally posted by mreigle I hope you have a bypass in that intake jsut in case you hit a puddle.

You can't install a bypass on a turbo setup, the suction is too great.

I will check my PCV valve and make sure it is working properly. I assumed it was because it is new.

I hope no water goes up into that intake.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

XMasta19	May-06-07 04:18 PM
Donating 2GNT member 650 posts,

#100015, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 3

Originally posted by mreigle
Nothing stand out from the pick except for a lack of FPR and the EVAP delete to blowout valve conversion. More information about your build would help.

I'm gonna go with the assumption that it's not the early fuel system, and his rising rate regulator is in the back where it belongs...but what is this talk of EVAP delete to blowout valve conversion emoji

-Xavier-
95 Eclipse RS-T...lost in the frozen tundra

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

hs_elrod	May-06-07 04:56 PM
Member since Aug 26th 2004 159 posts,

#100016, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 10

Originally posted by XMasta19

Originally posted by mreigle Nothing stand out from the pick except for a lack of FPR and the EVAP delete to blowout valve conversion. More information about your build would help.

I'm gonna go with the assumption that it's not the early fuel system, and his rising rate regulator is in the back where it belongs...but what is this talk of EVAP delete to blowout valve conversion emoji

Do you mean by the tank? I have always read that if you dont have a fuel return line to the engine bay, then one needs to be installed. Is that not so?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

WickedESi	May-06-07 05:05 PM
Donating 2GNT member 3090 posts,

#100017, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 11
May-06-07 05:07 PM by WickedESi

How do you have your fuel setup?

I'd move that vacuum line to the WG to the other side of that water pipe. It's silicone yeah, but they still crack, and it will melt if it touches that manifold.

I love these posts btw, I know exactly how excited you are.

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

totaleclipse_05	May-06-07 07:13 PM
Donating 2GNT member 1486 posts,

#100022, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 12

I agree with WickedESi about the wastegate vacuum line as mine cracked from the heat of the manifold so I re-routed it around the other way. You don't need that top banjo-bolt on the top of the wastegate either. If I left mine in on my car, the hood wouldn't shut, so I had to remove it. Also, Paul pointed out the intake looks a little restrictive and I agree with him. Do you have a FCD or Missing Link at all with your setup? I couldn't see one in the pic if one was hooked up and noticed it wasn't a 95 from the label on the firewall. Overall, very clean setup and have fun!

Mike D
-------------------------------------------------------------------------------------------------

Originally posted by DR1665
You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

kedaigle	May-06-07 09:13 PM
Member since Nov 21st 2006 10 posts,

#100025, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 12

Originally posted by WickedESi
How do you have your fuel setup?

12:1 FMU located in rear of car inbetween the stock FPR and fuel tank.

Originally posted by WickedESi
I'd move that vacuum line to the WG to the other side of that water pipe. It's silicone yeah, but they still crack, and it will melt if it touches that manifold.

You are absolutely correct. The second time I started the car to let it run, the silicone vacuum hose touched the manifold and melted. It's been replaced with a longer piece that I sheathed with SS braid and is secured safely away from the manifold.

Made it big 4 times to only have it taken away. Number five and waiting...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

mreigle	May-07-07 01:24 AM
Member since Jun 21st 2006 426 posts,

#100028, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 14

Originally posted by kedaigle

Originally posted by WickedESi How do you have your fuel setup?

12:1 FMU located in rear of car inbetween the stock FPR and fuel tank.

Originally posted by WickedESi I'd move that vacuum line to the WG to the other side of that water pipe. It's silicone yeah, but they still crack, and it will melt if it touches that manifold.

You are absolutely correct. The second time I started the car to let it run, the silicone vacuum hose touched the manifold and melted. It's been replaced with a longer piece that I sheathed with SS braid and is secured safely away from the manifold.

The blowout valve vacuum line melted or the EVAP? Neither one should be near the exaust manifold.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

mreigle	May-07-07 01:27 AM
Member since Jun 21st 2006 426 posts,

#100029, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 14

Also I had that oil breather filter and it worked great until I got boosted. Then it just started spraying oil on the engine. I would suggest an oil catch can. It won't effect the performance but I would hate to see some oil burnt on that throttle body.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

totaleclipse_05	May-07-07 05:42 AM
Donating 2GNT member 1486 posts,

#100030, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 16

Originally posted by kedaigle
The intake is 2.5 inch piping and starts inside the driver's fender. Air is "rammed" in from the vent opening in the bumper cover. Once air enters the filter it makes a 90 degree turn, and 2 45 degree turns before it hits the compressor. My previous set-up had a cold ram air intake and I did not want to loose that feature. I'll take your advice and move up to 3 inch piping in the near future.

We weren't necessarily saying the piping was too small, just the amount of bends and length before it gets to the compressor could hinder spool up time.

Originally posted by mreigle
The blowout valve vacuum line melted or the EVAP? Neither one should be near the exaust manifold.

No, his wastegate vacuum line touched the manifold and melted.

Originally posted by mreigle
Also I had that oil breather filter and it worked great until I got boosted. Then it just started spraying oil on the engine. I would suggest an oil catch can. It won't effect the performance but I would hate to see some oil burnt on that throttle body.

When I had my eclipse, I never had to worry about oil coming out of my breather filter and soaking anything, but on my talon, oil does leak out whenever it feels like it, it seems. Not necessarily when I'm boosting hard, but seems to more when I take tight corners and turns on the backroads. I made a catchcan out of a water bottle and works well.

Mike D
-------------------------------------------------------------------------------------------------

Originally posted by DR1665
You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

kedaigle	May-06-07 08:40 PM
Member since Nov 21st 2006 10 posts,

#100024, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 2

Originally posted by VelocitaPaola
You might consider reconfiguring the intake a little; it looks restrictive.

The intake is 2.5 inch piping and starts inside the driver's fender. Air is "rammed" in from the vent opening in the bumper cover. Once air enters the filter it makes a 90 degree turn, and 2 45 degree turns before it hits the compressor. My previous set-up had a cold ram air intake and I did not want to loose that feature. I'll take your advice and move up to 3 inch piping in the near future.

Made it big 4 times to only have it taken away. Number five and waiting...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

mreigle	May-07-07 11:29 AM
Member since Jun 21st 2006 426 posts,

#100064, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 18
May-07-07 11:30 AM by mreigle

Originally posted by kedaigle

Originally posted by VelocitaPaola You might consider reconfiguring the intake a little; it looks restrictive.

The intake is 2.5 inch piping and starts inside the driver's fender. Air is "rammed" in from the vent opening in the bumper cover. Once air enters the filter it makes a 90 degree turn, and 2 45 degree turns before it hits the compressor. My previous set-up had a cold ram air intake and I did not want to loose that feature. I'll take your advice and move up to 3 inch piping in the near future.

I hope you have a bypass in that intake jsut in case you hit a puddle.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

bigrob3232	May-07-07 12:05 PM
Member since Feb 08th 2006 203 posts,

#100068, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 19

that intercoolr looks familiar...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

bigrob3232	May-07-07 12:05 PM
Member since Feb 08th 2006 203 posts,

#100069, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 19

that intercoolr looks familiar...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

kedaigle	May-06-07 08:16 PM
Member since Nov 21st 2006 10 posts,

#100023, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 1

Originally posted by cs82685
Oh and I see you've got the invisible strut bar also, I love mine it's awesome, lol.

Oops. It's back on now, LOL

Originally posted by cs82685
oh and if you have a fuel pressure gauge test to see if whatever you are using to raise fp (i'm assuming fmu b/c I don't see cartech or sfmu) is doing so by using an air compressor or simply blowing into the vac line you used for your source to fmu

I'm using an FMU 12:1. As a matter of fact, I followed YOUR instructions that I had found in one of your responses to a post. Thanks. I have the FMU vacuum line t'ed off at the back of the manifold using the vacuum fitting on the left hand side of mani.

Made it big 4 times to only have it taken away. Number five and waiting...

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

edxmon	May-07-07 07:16 AM
Member since Jul 27th 2005 1006 posts,

#100035, "RE: Everything installed. Need last minute tips before driving."
In response to Reply # 22

Ohhhhh... are those GSX calipers? emoji

Originally posted by turbo8u
his girl kept looking out and down my car like uh ok we're in this 100 whatever thousand dollar car and that little whatever it is just raped us.... turbo screamed past the window like a vortex of ownage :-P robbing his engine of all the air around, and thats how i like it

Originally posted by ez
I came across a huge sack of walnuts in my grandmas garage - I better make use of them.

I contributed to the wiki! My Page: edxmon

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Top

Turbo/Nitrous Tech

topic #100010

Previous topic | Next topic

Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com

Generated in 0.068 seconds, executing 60 queries.