#31238, "egt question i searched and found nothing!!!!!!!!!!!!!!!!!!!!!!!!"
ok i know i saw this on a post a wile a go but could not find it but can you drill a hole for the egt probe with the manifold on if so should the car be running or what howw should i do it.also witch one do i tap into and i now thier numbered but witch numbers are what .thank you for your help .
#31239, "RE: egt question i searched and found nothing!!!!!!!!!!!!!!!!!!!!!!!!" In response to Reply # 0
Let the car run while you drill. Use runner #4, thats the farmost driver side runner. On the top or on the side is fine, whichever you prefer. Keeping the car running while drilling will make the metal shavings blow out, which is what you want
13.5 @108 MPH-2.2 60ft(stupid FWD!) S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential fuel injection) My webpage: http://eclipsed4evr.home.comcast.net -1998 Mitsubishi Eclipse RS-T- "Toy" -1992 Plymouth Laser Turbo AWD(SOLD) -2000 Honda CR-V(daily)
