| Go back to previous topic |
| Forum name | Turbo/Nitrous Tech |
| Topic subject | egt question i searched and found nothing!!!!!!!!!!!!!!!!!!!!!!!! |
| Topic URL | http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=31238 |
31238, egt question i searched and found nothing!!!!!!!!!!!!!!!!!!!!!!!!
Posted by qwad65, Dec-31-69 06:00 PM
ok i know i saw this on a post a wile a go but could not find it but can you drill a hole for the egt probe with the manifold on if so should the car be running or what howw should i do it.also witch one do i tap into and i now thier numbered but witch numbers are what .thank you for your help .
|
31239, RE: egt question i searched and found nothing!!!!!!!!!!!!!!!!!!!!!!!!
Posted by XtremeRS, Dec-31-69 06:00 PM
Let the car run while you drill. Use runner #4, thats the farmost driver side runner. On the top or on the side is fine, whichever you prefer. Keeping the car running while drilling will make the metal shavings blow out, which is what you want
|
31240, RE: egt question i searched and found nothing!!!!!!!!!!!!!!!!!!!!!!!!
Posted by qwad65, Dec-31-69 06:00 PM
thnk you verry mutch
|
31241, RE: egt question i searched and found nothing!!!!!!!!!!!!!!!!!!!!!!!!
Posted by fasterGS, Dec-31-69 06:00 PM
hey, wear some eye protection. Those shavings fly out and getting metal shavings on your eye is no fun!!!
|