Hey peepz,

I just replaced all my taillight bulbs with L.E.D.S. and am happy with the results but my lights flash really fast. I found an L.E.D. kit from autozone that is supposed to kill the problem and return all to normal the problem is I don't know which lines to connect. I need help so please respond.

I've never used one of those, but I believe the kit is essentially just a properly sized resistor. I think the blinker box flashes quickly when the brake/blinker wiring does not have the correct resistance (the gray wire with a blue stripe). I'd put the resistor in line with that, and test.

If I'm wrong, the 2nd thing I would do is to put the resistor in line with the green wire (the markers wire) and test.

2gnt: '99 RS-T, killed by a toyota, pending rebuild...
Daily: Volt
Daily #2: '99 EVG ebike- STOLEN by PEDRO

You don't give us much details on what you bought but if it is a couple of ballast resistors, used to simulate the current loading of the bulbs you just replaced, then you wire them across the brake light circuit. One goes on each side from the brake/turn + wire to ground. They install in parallel with the LED bulbs, NOT in series.

If you want to control the blinking another way you can try this but you need a little knowledge of electronic to follow why this mod works. Attempt it at your own risk.

http://www.rcaz.com/rcaz/sub%20indexes/turn_signal_flasher/index.htm

Originally posted by RoninEclipse2G

Originally posted by edxmon

Originally posted by azdave

Have I ever told you how much I hate and love you (at the same time) for doing this mod to your car... Im so fucking jelous... in a good way

ditto, that is gorgeous, major droolage! if you have any pics please do a write up on how you got everything so perfect, or just post a link to whoever else has done one

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

This would be a wonderful thing for azdave to respond too for a more technical answer, but I'll post a link to his blinker mod.

http://www.rcaz.com/rcaz/sub%20indexes/turn_signal_flasher/index.htm

Dave I hope you don't mind me posting this.

Edit: Darn you beat me too it.

My Blog

Those leds look nice. You wouldn't happen to have a night time pic would you?

Thank you dave.