Hey guys. I have spent about 2 weeks going back and fourth on which door panels to install on my car, so i decided to buy a set of door panels the fiberglass armor style ones for my eclipse. I put them on and after about a week i that the glass they made it with was too thin and was not going to be durable enough for my uses. Before changing my mind and ordering carbon fiber door panels, I took the time to fiberglass the actual mount of the AC vent which is in the door panel into the aftermarket panel. After changing my mind and deciding on going to get the carbon fiber door panels, I started fiberglassing the interior pieces so that i can paint them orange, and began to wonder if I should glass the air vent on this door into the panel and 2-tone paint the panel with it moulded in, or should i simply paint everything around it orange paint the ac vent black and simply put them back together. Thanks!

> The first pices should be of my old panels , then a few close ups or the panels, to the bottom should be the project I am currently on.

-Heres the link
http://www.angelfire.com/planet/orangeglow/door_panel_pic/

i actually put a bid in for those on ebay .lol

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

I seen how in your car the ac vent housing is black but the vent is blue. I think im gonan mold it in with some du pol glaze

I seen those on ebay, they are pretty extreme looking-






ugly in my opinion.

-MIKE-

Stroked 2.2L

those panels are originally team prototype's design. people started making copies and selling them on ebay for cheaper. i was actually gonna buy a pair but ended up losing all my money to a stupid casino... is your interior black? personally, i'd paint the panels black and paint the little pieces to match the exterior. but to be honest, i would repaint the whole car something else cause orange is very very ugly IMO.

all in opinion.. its built the way I wanted it, and that is all that counts.

Definetely moulded the difference is night and day lol Check em out

http://www.angelfire.com/planet/orangeglow/door_panel_pics/index.album?i=1

I would have gone with CF door panels first...

ya i went with fiberglass not because it looked better, but its a hell of a lot easier to fix. I worked at a body shop for a couple of years and i spent a lot of time fixing people's kits and whatnot, but man my CF panels are the way to go, but they look hella clean without having the seam between the ac vent and the insert for the door