Welcome to the 2GNT Forum!
Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers
Search Printer-friendly copy 1 User in Chat
Top 2GNT Technical Interior/Exterior topic #96073
View in linear mode

Subject: "Removing Interior Trunk Panels" Previous topic | Next topic
crashoverburnedAug-14-06 09:24 AM
Member since Aug 14th 2006
19 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96073, "Removing Interior Trunk Panels"


          

I'm in the process of painting my whole interior. I've already painted my dash and I'm about to paint my trunk. However, I've searched the internet and forums, including this one, looking for a "how to" or advice on removing the panels in the trunk, but had no luck. I'm sure people have done this before, so I'm asking if you could help me out and tell me how exactly you remove all the trim pieces in the trunk of a 1997 Mitsubishi Eclipse GS.

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic
RE: Removing Interior Trunk Panels, R34Eclipse, Aug-14-06 09:45 AM, #1
RE: Removing Interior Trunk Panels, crashoverburned, Aug-14-06 06:19 PM, #2
      RE: Removing Interior Trunk Panels, joeyt, Aug-15-06 03:39 AM, #3
RE: Removing Interior Trunk Panels, dalesmitsu, Aug-16-06 12:41 PM, #4
RE: Removing Interior Trunk Panels, techboy, Aug-23-06 07:01 PM, #5
RE: Removing Interior Trunk Panels, dalesmitsu, Aug-30-06 06:27 PM, #6
RE: Removing Interior Trunk Panels, Keith2172, Aug-31-06 04:54 AM, #7

R34EclipseAug-14-06 09:45 AM
Member since Oct 01st 2005
706 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96074, "RE: Removing Interior Trunk Panels"
In response to Reply # 0


          

unscrew and pop the clips? the middle rear is usually pretty tight the first time off, but its pretty straight forward, theres a couple screws under the back rest of the rear seats, around the floor board under the false floor and pop.

-----------------------------------
97 RS-T, STAR Stage 2, HAHN FMIC, Decah Lambo Doors, 19" Axis Hiros, Built 420a - SOLD
2004 - G35 6MT 20" HREs & Tein Flex
-----------------------------------

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
crashoverburnedAug-14-06 06:19 PM
Member since Aug 14th 2006
19 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96078, "RE: Removing Interior Trunk Panels"
In response to Reply # 1


          

Thanks for the reply. I'll probably poke around the trunk and look for screws. I just didn't want to break anything in the process. So what you're saying is that it's possible to remove all the trim in the trunk and get them painted? You just have to remove the center trim, the floor board, and go from there?

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

        
joeytAug-15-06 03:39 AM
Member since Mar 19th 2004
40 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96081, "RE: Removing Interior Trunk Panels"
In response to Reply # 2




          

Originally posted by crashoverburned
Thanks for the reply. I'll probably poke around the trunk and look for screws. I just didn't want to break anything in the process. So what you're saying is that it's possible to remove all the trim in the trunk and get them painted? You just have to remove the center trim, the floor board, and go from there?


Yea...It is pretty simple. As soon as you get the center piece to come off, everything will come out pretty easy. Pop it off from the bottom first and then you'll have to lift it upwards to pop the clips that hold it from the top.

www.Project2G.com

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

dalesmitsuAug-16-06 12:41 PM
Member since May 13th 2006
986 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96107, "RE: Removing Interior Trunk Panels"
In response to Reply # 0




          

Buy the Haynes Manuel at an autoparts store its less than 20 bucks.

It has everything you need to remove the whole interior front to back nad complete tear down/ for the engine from 420a,turbo etc.

the book is for 1995 to 1999 laser,talon and eclipse.

Just buy the book it helps out alot?

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
techboyAug-23-06 07:01 PM
Member since May 20th 2002
1662 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96217, "RE: Removing Interior Trunk Panels"
In response to Reply # 4


          

You have to pull pretty hard. They are not meant to come off. Sometimes the clips break and there's really nothing you can do about it.


1999 Eclipse GST 4G63

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

dalesmitsuAug-30-06 06:27 PM
Member since May 13th 2006
986 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96330, "RE: Removing Interior Trunk Panels"
In response to Reply # 0




          

Originally posted by crashoverburned
I'm in the process of painting my whole interior. I've already painted my dash and I'm about to paint my trunk. However, I've searched the internet and forums, including this one, looking for a "how to" or advice on removing the panels in the trunk, but had no luck. I'm sure people have done this before, so I'm asking if you could help me out and tell me how exactly you remove all the trim pieces in the trunk of a 1997 Mitsubishi Eclipse GS.



Dude, buy the Haynes manuel for 1995 to 1999 eclipse, laser and talon.

under 20 bucks at advance..

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

    
Keith2172Aug-31-06 04:54 AM
Member since Jan 16th 2004
1281 posts,
Click to send email to this author Click to send private message to this author Click to view this author's profile Click to add this author to your buddy list
#96336, "RE: Removing Interior Trunk Panels"
In response to Reply # 6


          

Originally posted by dalesmitsu
Dude, buy the Haynes manuel for 1995 to 1999 eclipse, laser and talon. under 20 bucks at advance..


There's a 95-99 Laser?!? Where can I buy one? That'd be pretty sweet IMO!

Also, while you are in the trunk anyways, take the time to either build a brace for under the spare tire cover or reinforce it with fiberglass or both (like I did), I split my rear center piece because the cover cracked and I was unable to remove either piece without breaking them both emoji . I'll take pics later if you want them.

Representing the Central Cali chapter of 2GNT!
(I think I'm the only member emoji )

  

Report This Post to Admin Printer-friendly copy | Reply | Reply with quote | Top

Top 2GNT Technical Interior/Exterior topic #96073 Previous topic | Next topic
Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com
Generated in 0.049 seconds, executing 28 queries.