Ok, so the inevitable happened yesterday, I was going out to the car and when I grabbed the door handle to open the door, guess what happened? Oh yeah, it broke! So now I figure, I might as well replace it with something better, like say, metal. So I do a search on metal door handles and the most applicable thing I can come up with is AZDaves repair, which is good, but I'm thinking more of a completely metal handle, prefferably aluminum, so I can polish it and achieve that OG, true baller, JdM TyTE YO! effect. Can't seem to find it, does anyone make something like this, I would figure by now someone would have made a mold or something, anyways, help is appreciated, I don't want to have to reuse the plastic handles.

Representing the Central Cali chapter of 2GNT!
(I think I'm the only member )

third thread in the group buy section

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=49&topic_id=3590&mode=full

-Roman

you're right, I should have done more searching, but it doesn't seem that they got their door handles. Anywhere else I could get something like that?

Representing the Central Cali chapter of 2GNT!
(I think I'm the only member )

do it like me . mines metal . lol .a metal plate welded where they were .lol .shave them .

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

Well you know my opinion of course....

Here is a quick way to see if you like the look of an aluminum handle. Get some dead soft aluminum tape from a home store. It's used for repairing duct work in the heating and cooling trade. Apply it to the handle and go over it with a little Scotchbrite for an brushed aluminum look or polish it with Mothers polish for a refective look. Clear coat it with a rattle can and try it for a few days... or forever.

http://www.rcaz.com/rcaz/sub%20indexes/doorhandlefix/index.htm

Yeah, I went ahead and bought your repair kit so I'll fix these handles and keep my eyes open for some billet aluminum handles later. Thanks guys.

Representing the Central Cali chapter of 2GNT!
(I think I'm the only member )

damn keith. I stank by AZ daves handles. Was iffy when I looked at em all hacked up, but some jb weld later and they are rock solid.

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for