quick question i took my front bumper off to put the foggies on and when i put it all back together i forgot the piece of white foam that goes between the bumper cover and the hard plastic bumper. does this piece have to be there? will it hurt anything if i leave it out??? thanx
98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.
Status:Up and running again! nice new paint
Custom stage 2 hahn turbo kit Hahn Super 16g turbo (ceramic coated) Hahn manifold (ceramic coated) Hahn Downpipe assembly Hahn intercooler piping smic Hahn oil line kit Type s bov 2G Gsx smic walbro 255 fuel pump Synapse missing link Vortech s-fmu NGK Bkr7e11 Plugs A-pillar w/boost, a/f, oil pressure gauges
#85740, "RE: front bumper" In response to Reply # 5
Acctually the foam part goes into the black bumper under the bumper cover...I don't think the foam will help in any accident. SO long as you have the black supporter in there...You'll be fine, as stated above.
#85775, "RE: front bumper" In response to Reply # 7
ok guys i get the point stupid question but when it comes to a DSM ive learned there really are no stupid questions. was just checking to make sure it served no major purpose. but thanx alot for the help, the bumper is back together and doing great :0)
98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.
Status:Up and running again! nice new paint
Custom stage 2 hahn turbo kit Hahn Super 16g turbo (ceramic coated) Hahn manifold (ceramic coated) Hahn Downpipe assembly Hahn intercooler piping smic Hahn oil line kit Type s bov 2G Gsx smic walbro 255 fuel pump Synapse missing link Vortech s-fmu NGK Bkr7e11 Plugs A-pillar w/boost, a/f, oil pressure gauges