I have the single projector lights on my car (see link to see exactly which ones i am talking about)...
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7950757713&category=33710

anyway..all i need to do is change the freakin bulb on it cuz it burned out...How hard is it? i had better luck changing my springs and struts... I know it takes an H3 but I cant figure out how to get the bulb out...there are two screws holding in a bracket which holds in the plate that holds in the bulb (from what i can tell) ...am i suppost to take those screws out? if so that is ridiculous since there is no way to fit a screwdriver in that little area ...i did a search and found one thread where someone asked the same question but the pics in it that i need to see are nice big red X's...any advice is appriciated...thanks so much
projectors = me =

-Anna (96 Eclipse GS)

http://www.cardomain.com/memberpage/474544

take the backing piece of the headlight, it turns out.
then the little bracket you are talking about, it kind of 'pulls then pops' out of the way. pull it up a little bit and then slide it back, you can do it. then the bulb will pull straight out and then unplug and replace it. takes about 10 minutes max.

-MIKE-

Stroked 2.2L

ok, thx so much, i am gonna go try it now...thx again

-Anna (96 Eclipse GS)

http://www.cardomain.com/memberpage/474544

yup yup holla

-MIKE-

Stroked 2.2L

OMG! WOOHOO got it done...ya, it was easy...and i completely understood what you meant after i went out there and started moving the bracket thing around...i felt like a dumbass but still was happy once i did it...i guess i ws just scared of breaking something cuz of all the horror stories i've heard...anyway..THANKS SO MUCH!!!! again... i owe ya a beer

-Anna (96 Eclipse GS)

http://www.cardomain.com/memberpage/474544