Yes I know this question has been asked before but How do i fix it or where do I find the procedure cause i looked almost everywhere and have found nothing even at vfaq.
95.5 Eagle Talon ESi Central Massachusetts
Engine: -pvc cai w/k&n -ngk plugs -magnecore 8.5 wires soon -af/x udp soon Exhaust: -road runner thrust muffler -chrome tail pipe tip -2.5" hi-flow cat soon -2.5" custom piping soon -brospeed header soon Exterior: -97 talon f&r bumpers -97 talon side mldgs -96 talon spoiler -15" prime 107 chrome rims -195/55/15 goodyear eagle rs-a -chrome fender trim -ralley racing fog lights -custom mess grille -clear side markers soon -illuminated tail soon Interior: -pioneer sound system -black carpeting soon -painted interior soon -eagle symbol soon
#7553, "RE: door glass rattle" In response to Reply # 3
Hey man I have the same prob, except mine only rattles when the window is completely down! How do you fix that. I hear that you can't, a buddy of mine has a TRD solara and his windows do the same thing when down(and he paid 32k). I should state that the only time it rattles is when you 'slam' the door while the windows are down.
1995 RS 16x8 Momo's CAI 4-2-1 Headers 2.75 in Tenzo cat-back exhaust carbon fiber s%^t 2nd gen altezza's GTS carbon look headlight covers Apex-I Super AFC Eiboch lowered Momo pedals Indiglo gauges Autometer gauges/pillar pod Front, Rear, upper and lower strut braces(neuspeed) Clarion auto pc with navigation sytem Clear front corners Ported throttle bodie(55mm) Racing stripes (one 2" one 6" side by side down the passenger side) Custom front grill "mitsubishi inside" sticker (my favorite) I got lots more mods but Im tired of typing
#7557, "RE: door glass rattle" In response to Reply # 7
it's normal amongst our cars, but don't just accept that. there was a place on dsm.org that had an article about how to get rid of it. i still have it, haven't done what the article said yet. BUT, there IS a way to do it. search for the article at dsm.org.
#7558, "RE: door glass rattle" In response to Reply # 8
i bet if you get new rubber things on the door you will fix it cause i have the same fu*king problem on mine on both sides i think im going to replace the little rubber things if i can find them maybe at a junk yard or something
Boca Raton, Florida 95 Eclipse GS- sold 99 Eclipse GSX- 386awhp 98 Eclipse GS- sold 92 Prelude
#7559, "RE: door glass rattle" In response to Reply # 9
naw guys. don't let it slide.Fix it now, I was just going to post about my problem which I hope somebody could help, and it seems to be occurring with some of you people. My door always rattled when I closed the door with the windows down, but the other day I rolled the window up and it joggled up a bit and then closed with a huge gap between the side and the window. My whole piece of glass is loose and out of align. I'm gonna have to take off that side panel and have a look, anybody have some advice before I take it off.
#7562, "RE: door glass rattle" In response to Reply # 12
Am I being ignored..? All you have to do is take off the door panel.. roll the window all the way up.. and bend the L shaped prongs inwards so it keeps the windows tight. It's the ones with the felt on the ends of them.
#7563, "RE: door glass rattle" In response to Reply # 13
naw bro, nobody on this whole board goes unheard...hehe well anyways, I fixed it. Mine wasn't just a rattle, it used to be when I closed the door but then it just totally came off line and left a huge 1-2 inch gap between the door and window, well I took the panel off my passenger door, just for those who might have to do this sometime or wouldn't help checking: 1. 4 blk screws-two on each side 2. 1 small screw under tab inside handle 3. 1 small screw behind door latch the piece with the door latch might hold onto the door but it comes off easily with some manuevering. The switches for the window and door locks hold onto to rest of the door and need to be unscrewed, my problem was the track on the passenger side(looking at passenger door from driver seat,far right) door has a bolt that runs up and down and keeps the window aligned had come unbolted with the window. I bolted it and put everything together. well not only did I fix my window alignment, the rattle is gone, it makes me wonder how long that bolt was loose. There is no rattle at all, when I close the door w/ the window up or down. well I hope my experience can help someone else.
ps: mitsubishi couldn't find any other way but to use tar to keep a piece of plastic stuck to frame of the door. some dam good engineers!!!!
LOL. Yeah when I took off my door panel to try to fix the broken door handle (which is still broken) I saw all that shit goin around the whole door and was like,"WTF were these a$$holes thinkin?"
Search
Printer-friendly copy
0 Users in Chat
