Yes I know this question has been asked before but How do i fix it or where do I find the procedure cause i looked almost everywhere and have found nothing even at vfaq.

95.5 Eagle Talon ESi
Central Massachusetts

Engine:
-pvc cai w/k&n
-ngk plugs
-magnecore 8.5 wires soon
-af/x udp soon
Exhaust:
-road runner thrust muffler
-chrome tail pipe tip
-2.5" hi-flow cat soon
-2.5" custom piping soon
-brospeed header soon
Exterior:
-97 talon f&r bumpers
-97 talon side mldgs
-96 talon spoiler
-15" prime 107 chrome rims
-195/55/15 goodyear eagle rs-a
-chrome fender trim
-ralley racing fog lights
-custom mess grille
-clear side markers soon
-illuminated tail soon
Interior:
-pioneer sound system
-black carpeting soon
-painted interior soon
-eagle symbol soon

yeah dude me too i have the same damn problem. someone show us the light. HEAL ME MY BROTHA!!!

"Canada - The Maple Leaf State"
-Me

BKR5E-11's
cone filter
brospeed muffler from mx-3
exhaust leak (mad power gain)

I just bent those things with the felt on the tips to make the glass steady..

Same prob I have! Passenger side when the window is all the way up. Someone please help.

Hey man I have the same prob, except mine only rattles when the window is completely down! How do you fix that. I hear that you can't, a buddy of mine has a TRD solara and his windows do the same thing when down(and he paid 32k). I should state that the only time it rattles is when you 'slam' the door while the windows are down.



1995 RS
16x8 Momo's
CAI
4-2-1 Headers
2.75 in Tenzo cat-back exhaust
carbon fiber s%^t
2nd gen altezza's
GTS carbon look headlight covers
Apex-I Super AFC
Eiboch lowered
Momo pedals
Indiglo gauges
Autometer gauges/pillar pod
Front, Rear, upper and lower strut braces(neuspeed)
Clarion auto pc with navigation sytem
Clear front corners
Ported throttle bodie(55mm)
Racing stripes (one 2" one 6" side by side down the passenger side)
Custom front grill
"mitsubishi inside" sticker (my favorite)
I got lots more mods but Im tired of typing :)

I think that is normal for when you slam the door when the windows are dowm. My mothers riviera(45 grand) does the same thing.

I have the same problem, both my windows rattle when completely down or half way....how to fix it????????????

Daniel
'96 GS-T
A.K.A. "HONDA HUNTER"
"DON'T HATE....PARTICIPATE"

welcome to the world of DSM

javi d
vroom n' boom

it's normal amongst our cars, but don't just accept that. there was a place on dsm.org that had an article about how to get rid of it. i still have it, haven't done what the article said yet. BUT, there IS a way to do it. search for the article at dsm.org.

Dexter Gonzalez
Parsippany, NJ || PRterk52@aol.com

1995 Mitsubishi Eclipse GS

Installed:
-AEM CAI
-B&M "The Edge" short shifter
-Borla cat-back exhaust
-Catco hi-flow cat
-Magnecore 8.5mm plug wires

Not yet installed:
-AEM bypass valve
-AFX UDP

i bet if you get new rubber things on the door you will fix it cause i have the same fu*king problem on mine on both sides i think im going to replace the little rubber things if i can find them maybe at a junk yard or something

naw guys. don't let it slide.Fix it now, I was just going to post about my problem which I hope somebody could help, and it seems to be occurring with some of you people. My door always rattled when I closed the door with the windows down, but the other day I rolled the window up and it joggled up a bit and then closed with a huge gap between the side and the window. My whole piece of glass is loose and out of align. I'm gonna have to take off that side panel and have a look, anybody have some advice before I take it off.

hey that article in dsm.org is just for 1g...is the same or similar? anybody know anything?

hey just trying to keep this up top so people can see it and help cuz i need it!!!!!!!!

Am I being ignored..? All you have to do is take off the door panel.. roll the window all the way up.. and bend the L shaped prongs inwards so it keeps the windows tight. It's the ones with the felt on the ends of them.

naw bro, nobody on this whole board goes unheard...hehe well anyways, I fixed it. Mine wasn't just a rattle, it used to be when I closed the door but then it just totally came off line and left a huge 1-2 inch gap between the door and window, well I took the panel off my passenger door, just for those who might have to do this sometime or wouldn't help checking:
1. 4 blk screws-two on each side
2. 1 small screw under tab inside handle
3. 1 small screw behind door latch
the piece with the door latch might hold onto the door but it comes off easily with some manuevering. The switches for the window and door locks hold onto to rest of the door and need to be unscrewed, my problem was the track on the passenger side(looking at passenger door from driver seat,far right) door has a bolt that runs up and down and keeps the window aligned had come unbolted with the window. I bolted it and put everything together. well not only did I fix my window alignment, the rattle is gone, it makes me wonder how long that bolt was loose.
There is no rattle at all, when I close the door w/ the window up or down. well I hope my experience can help someone else.

ps: mitsubishi couldn't find any other way but to use tar to keep a piece of plastic stuck to frame of the door. some dam good engineers!!!!

LOL. Yeah when I took off my door panel to try to fix the broken door handle (which is still broken) I saw all that shit goin around the whole door and was like,"WTF were these a$$holes thinkin?"
:)
-Tony 98' GS-T



http://www.hometown.aol.com/turboclipz/index.html