For some reason when I reinstalled my factory taillights my blinkers no longer work. Hazards work but no blingers. I'm not sure if my break lights are working either but since its not dark here yet I'll find out in an hour or so. Fues are good everything seems to be hooked up right. I have gone through and checked at least 8 times. When I turn on my headlights the taillights illuminate but no blinkers. Any ideas?
One of the wires got crimped pretty bad. It got caught between the bolt and the nut. Think this could be the problem? It dosen't seem to have damaged the wire. Maybe I should cut the wire and replace it with a connector. Think this will work?
I would go back and check all your connections again...possibly wrong harness with another harness and such...If you crimped anything kinda bad...I would snip and reconnect with a solid crimped connector on that...to insure a proper connection. Other than that...i myself dunno. maybe get a voltameter on each wire and make sure theres power running to each line...if not, then trace it back to where it stops. Also! O! Check your fuses...could blown a fuse under the hood ......or if your stereo system is hooked up under there somewhere check those too with your battery wires......
Search
Printer-friendly copy
0 Users in Chat
Thanks.