| Go back to previous topic | |
| Forum name | Interior/Exterior |
| Topic subject | Stumped |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=7205 |
|
7205, Stumped Posted by Northstar, Sep-04-01 10:35 AM For some reason when I reinstalled my factory taillights my blinkers no longer work. Hazards work but no blingers. I'm not sure if my break lights are working either but since its not dark here yet I'll find out in an hour or so. Fues are good everything seems to be hooked up right. I have gone through and checked at least 8 times. When I turn on my headlights the taillights illuminate but no blinkers. Any ideas? | |
|
7206, RE: Stumped Posted by Northstar, Sep-04-01 10:39 AM One of the wires got crimped pretty bad. It got caught between the bolt and the nut. Think this could be the problem? It dosen't seem to have damaged the wire. Maybe I should cut the wire and replace it with a connector. Think this will work? | |
|
7207, RE: Stumped Posted by Northstar, Sep-04-01 03:16 PM OK that didn't work. Come on someones gotta have an idea.....anyone? | |
|
7208, RE: Stumped Posted by guest, Sep-05-01 05:17 AM I would go back and check all your connections again...possibly wrong harness with another harness and such...If you crimped anything kinda bad...I would snip and reconnect with a solid crimped connector on that...to insure a proper connection. Other than that...i myself dunno. maybe get a voltameter on each wire and make sure theres power running to each line...if not, then trace it back to where it stops. Also! O! Check your fuses...could blown a fuse under the hood ......or if your stereo system is hooked up under there somewhere check those too with your battery wires...... | |
|
7209, RE: Stumped Posted by Northstar, Sep-05-01 08:17 AM Hey Kapt. Thanks for the reply. Blew a relay in my kick panel. Didn't think to look there until this morning. All better now :) Thanks. | |
