Ok guys, as most of you know I just finished my interior. I think it came out unbaleivable, now I got a HUGE issue.

Easter sunday I decide to take my car out for a special day ride. Temps got to about 60-70 in my area, EVERYTHING that was in direct sunlight in my car that I painted with fusion, is SUPER STICKY. Me and my girl got black all over our clothes, and on my BRAND NEW tenzo seats..WTF..This shit is supposed to be for Vynel and Plastic.
Everything was fine and dandy till temp rose. Right now everything that got hot is still sticky, I can't explain this...here is a link to the krylon site for fusion. Read it NO PREP NEEDED, just spray on.

http://krylon.com/main/product_template.cfm?levelid=5&sub_levelid=10&productid=1751&content=product_details

I wrote to them stating my issue....let's see if I get a response.

I mean shit if it says for use on this application it should be good, if not the company should stand by the shit they make and replace my interior. Fuck this I'm super pissed, I was so impressed with the way it came out. It wasn't bad till it got hot.

WTF do I do now guys??

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!

i like the picture.
that sucks about your loss..hope ya get something out of it.

I always have a spare bottle on hand for unexpected guests.

heres a little sample of the interior finished up....wouldn't you be pissed? I looks good.

Http://members.aol.com/Pushin420a/interior.jpg

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!

is that after it got tacky? the doors look bubbly

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!

Isn't the part of your door that you painted soft vinyl? If so that would probably be why it did that. It's not really for use on any type of soft vinyls, only hard. That happened to me with my armrest.

Mike
www.streamlinemotorsportsva.com
http://members.cardomain.com/eklipsdrvr99

There is a slim chance you can clearcoat the Fusion with another product (SEM possibly) which might seal the surface of the Fusion and keep you from having to strip the entire project and do it over. I have never used the Fusion paint but I saw no references on the Sherwin Williams web site that it was suggested for flexible vinyl. We use flexible vinyl sheet at work and have learned that the plastizers that keep the vinyl soft will migrate or outgas throughout the life of the product (especially when heated) and we have had to do months of long term testing to avoid our adhesives and paint from failing after being applied to the soft vinyl.
If you try the clearcoat test, do it on a small part and let it cook in the sun for several days before undertaking anymore parts. It may be completely incompatible with the fusion paint and bubble up. Might be a good idea to test it on a junk yard part first. Good luck.

/me sees teh Krylon loop hole...

Plastic:
Krylon® Fusion is the world's first no-prep superbond paint for plastic. This revolutionary product makes life simple, again. With no sanding or priming, this product dries in 15 minutes or less. Fusion bonds easily to plastic, PVC, hard vinyl, resin and more creating a durable, professional-looking finish that won't chip, peel or fade.

I hope they're feeling generous and you maintained a polite tone in your request. If you told them "Hey you fucking liars you ruined the interior of my fucking car and I demand X dollars for repairs" they're likely going to give you a polite "go fuck yourself" letter. Good luck man. Seriously.

/me crosses fingers...

sorry, do0d....
i used that fusion shit when it first came out, on my trunk... (my entire interior was going to be that "Patriotic Blue" or whatever... it chips off in no time... my trunk looks like shit now, imo (and not because its blue either) i can get pics if you need them to make your case or whatever...

RIP- Rustbucket 1995-2009

‹hazardeclipse› by the way youre thinking of hazard_eclipse
‹hazardeclipse› thats not my fucking car
‹teklein› Oh yeah
‹hazardeclipse› he stole my name
‹hazardeclipse› fuck that radioactive yellow shit
‹teklein› Hazard_eclipse is the homo.

Aw jeesus guys. A) NevAr paint anything with a spray can B) Always use SEM paint on flexible stuff. C) If you didnt already know this, stop doing it yourself. D) DUH!!11!

AIM - scirio

I wrote a very nice letter. Very professional. Hope it works.

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!

heres a copy of the letter....I know some of it isn't true like WORLD OF WHEELS CAR....but you guys understand.

Hello,
I am in the middle of a I huge problem. I recently used you product Krylon Fusion on my World Of Wheels show car. I used it on the interior door panels and rear plastic peices.
The finished product came out GREAT, I can supply pictures. My problem came this last sunday, Easter sunday. I took my car out for a special day out. Temp outside got to about 60 since I live in the East coast and it's still winter weather here. I would say top temp in car got to about 70F.
Well here is my issue, Everything exposed to direct sunlight got sticky, and all over our clothes and my Brand new Tenzo Racing seats. Since the doors rub against the seats when closed. Everything still remains sticky that got warm. Thing is that it all was perfect and this product is made for this type of application. I don't understand what happened. I would like to receive a response to this matter as soon as possible. If this product is infact not made for vynel and plastic applications, mabey it shouldn't say so on the cans.

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!

i just spent over 200$ buying an entir new interior because i painted mine with duplicolor and it got sticky...

2005 Corolla XRS
2ZZ 6-speed

i was always under the impression you needed to use a dye not a spray paint on soft vinyl i used duplicolor hi temp engine paint and clearcoat on all my trim peices...no chiping, no flaking, no sticky. if it can hold up to the texas heat it can go through anything imo....maybe with the exception of phoenix. anyways...maybe yall are using the wrong paint or not letting it cure or something...i dunno...iv never had any problems what so ever

-----------------------------------------
2011 Nissan Xterra Pro-4x

2007 Kawasaki Ninja 650R

1996 Mitsubishi Eclipse RS-NX 75 shot, AEM CAI, P&P t/b and intake mani-SOLD

1964 Buick Electra 225-all original, all power options, 325hp, 445ft/lbs tq

SEM Color Coat is the shit. If you re-do anything in your interior use that stuff. Comes in a variety of colors too.

Sorry about what happened. Hopefully you get things back to normal.

Jonathan
95 Eclipse GS
8 injector
Hahn Stage 3.5
Howell 2.2L Stroker

T O T A L L E D, T H A N K S T O S O M E A S S H A T!!!!!!!!!!!!

tenzo.....ARRRRRRRRRRRRRRRRRRRRRRRRr

FS: 2.5" Test Pipe 25 shipped

i painted my car with testors hobbie paint. never cracked or got sticky. good luck with that i hope ya hear something back asap.

HEy guys I got a reply....

Thank you for your inquiry. A few things to help us better understand your application:

1. What exact product was used to wipe down areas before painting?
2. When was the product applied (how many days before use)?
3. What were the temperatures and humidity when applying the product? In the drying/curing area?
4. Were the areas painted all rigid, or was the product applied to softer vinyl?

I sent them some answers let's see what happens....

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!

I painted my a-pillar gauge pod with black krylon fusion and it came out fine and still looks like the day i painted it. I did it three months ago.

myspace.com/coastiecobb

Oh man that blows and after you just did all that work to get the car done. When i painted a few parts in my car (gauge trim, radio trim, and areas in maual door panels when the cloth is on power doors) i used the interior paint that jc whitney sells. only problem was the blue did not match. So i used JC whitneys plastic primer, "painters touch" blue from home depot, and jc whitneys plastic interior paint sealer. its been two years and the paint is indestructable....my dogs nails dont even hurt it. yes i have let my dog in my car!

For what its worth, i dont have a set of door panels to give ya but i do have the hatch plastic, and the pieces that go around the quarter window.....they are yours if you pay shipping. i do have a dash.....still grey its yours for 35.00 + shipp. perfect shape...no paint....sorry.

for all the other vultures out there....these prices do not include you...lol

Terry

I painted my armrest with duplicolors vinyl paint and it is flaking off bad.Had anyone else painted there armrest and had it stay looking good?

Shawn
99 Eclipse RS
Hahn Stage 2,Full built bottom end with je 8:8 and eagle rods ect..

I bet people who used that SEM shit when they painted their armrests can still say nice things about them. I used some Rustoleum I had lying around to do my trim pieces in the dash. The only place it's coming off is the trim behind the driver's door handle since there was no primer or clear used and it gets rubbed by the back of my hand so often. No big whoop. SEM for serious interior coloring imo.

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!

Got a reply

Your answers to questions 2-4 are perfect, however the main issue can be found in your answer to question #1. When painting plastic/hard vinyl surfaces with the Krylon Fusion, it is very important to wipe down new surfaces with paint thinner. Paint thinner neutralizes the plasticizers inherent within the substrate. If the plasticizers are not neutralized, the product can peel or soften, especially when exposed to heat.

At this point there are two (2) solutions:

1.) Remove it - take the Fusion off the surface and leave the surface clean and dry
The best choice is Mineral Spirits.
Denatured Alcohol will also work but is not as efficient.
Turpentine will also work but is stinky and slow to dry.

OR

2.) Seal it - seal the sticky Fusion paint to the surface
Apply 2 medium coats of Krylon Low Odor Clear #7110 Gloss or 2 medium coats of Minwax Polycrylic (same as Krylon Low Odor Clear)

The 2nd option typically works, but we would recommend a test area.

Sincerely,

Keith

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!

ya i had the same deal...i covered the krylon with a clear coat then went over it with a vyinly dye shit and its great now

Klein567 - Ya i heard about that ticket you and Sean got.
Clint485 - Stupid chick cop...worst part was she looked like a dude.
Klein567- Thats becuase all hot cops are strippers

holy shit!

The the first thing I was gonna say was did you prep the surface 90% of all painting problems comes with NOT prepping the surface. You are supposed to use a 400 grit paper and thinner on plastic then paint AND let it seal before it hits sunlight otherwise you're SOL

*Skrilla
"Honest officer, I thought you were trying to race me"
Talon: 1st 2.4L
'97 Prelude
'04 350Z

Originally posted by etx
Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon!

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!