Hey guys well as some of you might know, I ordered a pair of tenzo seats. My question is, can someone take a pic of the bottom of your tenzo seat. If it's not to much trouble to pull four bolts, get me a pic of the bracket...

I will paypal 20 bux to the person who gets me measurements and pics of the brackets for our car...

I dont wanna pay 100+ I just spent to much money this week....

New rims, cam, cover,seats,rug,headliner,paint...ect ect.

TIA...

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!

I will draw you out the plans to make your own tomarrow in the morning after work (6AM) I have the same seats and i bought the brackets.

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!

If you want i can probably make you a set for 40.00 + shipp spray paint included.

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

contact me on aim....sounds interesting...I'm good at fab and welding but 40 is a good deal to not hafta do it myself..

Hit me up man

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!

I'll hit you up tomarrow, i am at work right now.
I will draw out the plans and price all the steel at home depot and hit you up on aim.

Terry


96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

Same grade as what tenzo makes.

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Any update on the brackets?? I'm interested and need them asap

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!

ok i have the passenger drawn out, drivers is just a mirror image of that. i need a couple measurements on them yet will do that in a few hours and have the plans to you by noon. Really drawn nice too you will be happy.

Terry


96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Well Terry seemed like a cool guy. but a little typo on my part set him off and now I gotta go make my own brackets....

Scenerio.... For the past week I've been coversating with terry "Star Turbo Talon", he was gonna make brakcets for me. Well tonight he E-mails me saying he's done and to send money to his paypal account. Fine thats cool, here's the mistake. I said to him "what are you shipping" instead of how are you shipping. I've had a long night of studying and admit to writting the e-mail fast.

I had wanted to use my fed ex account to ship and that is why I wanted to ask how he wanted to ship, by a little mistake I got this in reply.
---------------------------------------------------------------------

What I am Shipping? What the hell have we been talking about? You asked me if I would make you a bracket for your tenzo seat, you asked me to make one because you don’t know how to read plans. You gotta be kidding me, my furnace has been taking a shit I could have been working on fabricating an inducer wheel to save 240.00, instead I worked on a bracket for your car and you have the audacity to ask me what I am shipping? You know what, go buy the brackets.



Terry

---------------------------------------------------------------------

Now I understand his frustration, his furnace is screwed up and ect ect...but damn all that madness towards me, when it was a typo.

I tryed E-mailing him back, with no response. I'm not sure if he was having a bad nght or what, All I wanted was the brackets. I never ment to piss him off...

So in front of the whole 2gnt community "I appologize for my typo"

Please terry get in touch so we can finish making arraingments....

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!

I need some brackets too, I have two sitting in my room for the last year. But I think you also need to make custom sliders with it. I know they sell brackets and sliders separately.

intricatelines.com/ -graphics and vinyls

"Tell them of us and say,
For their tomorrow,
We gave our today."
-- The Kohima Epitaph

Actually most placed give you the sliders when you buy the seats....really crapp they did not when you bought yours. The sliders i would buy and not try making, they only cost 45.00 a set last I checked.

Pushin as for your bracket....this weekend once i am off work i will contact you. I busted my a## late at night after work because you were looking for an update a day after i had the frame done. We discussed that these would have to be done during the week no promises on a day because i too work, long hours to be exact 12+ hours for the power company. You have been in a hurry the day i told you i could make you one. If you want a shipper to come get them thats fine i dont care. they will have to be at my house when i am home from work. If you dont want it..that fine it can sit with the cavalier bracket i once made.

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

If anyone else wants a set i can make them by next sunday..not this sunday. I would prefer a 20.00 deposit for two 10.00 for one via paypal. then 10.00 per bracket + shipping once completed. The down payment is for materials and a commitment. I dont want to make these brackets and then look at them every other day. I am not really making any money on these (7.00) and that does not cover the wire for my welder. So i am doing these for free basically. one bracket takes me about 4hrs to weld and fit/cut.

I personally paid 100.00 for mine a thought it was worth it.

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Cool, Your the man "Star Turbo Talon" Yeh you are right I was in a rush to get them. I thought I remember you saying to ask you on monday about them.

Um...As far as myself I still need them, and I'm sure there are a few others I talked to that would like them also. Why don't you put your paypal address here, and I will forward a deposit. I'm sure you will have more to follow also.

I can't wait to see them, but I hafta wait for my new carpet and that's about a week. The damn one from mitsu wasnt't right.

Thanks for replying Talk to you soon....

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!

Pushin420a.....lee your bracket is done, there is no need for a deposit now. Pay me in full and i will shipor you can have fed Ex come get it. sorry there are no drop off fed ex companies around here. I think i know where a fed drop locations are if you want to get me a shipping label and fed ex box. Seems like more work than it is worth. If you weant me to make a second one then send me 20.00 deposit and i will let you know whne it is done....probably monday afternoon.

paypal ID terrence.godfrey@sbcglobal.net

if anyone else wants a set or just one contact me boefore sending any deposits ect (this should be obvious).

Terry



96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

did you ever sell your scanner?

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Payment sent...thanks

~Lee

"CHECK OUT THE NEW CARBON KNIGHT AUTO"
still under construction
http://hometown.aol.com/pushin420a/index.html

Please help fix my car..
"DONATIONS ARE WELCOME"


***MODS***
Afx/Race computer, V2CAI, 60MM TB, P&P intake, Cam Gears, Exhaust
Tein Drop springs, Tokico 5-way adjustables.

***Mods to come***
Crane Cams,UDP,full greddy exhaust,headers

Lots of Show!!