Hey guys well as some of you might know, I ordered a pair of tenzo seats. My question is, can someone take a pic of the bottom of your tenzo seat. If it's not to much trouble to pull four bolts, get me a pic of the bracket...

I will paypal 20 bux to the person who gets me measurements and pics of the brackets for our car...

I dont wanna pay 100+ I just spent to much money this week....

New rims, cam, cover,seats,rug,headliner,paint...ect ect.

TIA...

I will draw you out the plans to make your own tomarrow in the morning after work (6AM) I have the same seats and i bought the brackets.

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Originally posted by Star Turbo Talon
I will draw you out the plans to make your own tomarrow in the morning after work (6AM) I have the same seats and i bought the brackets. Terry 96 Eagle talon ESI rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

That would be awsome....measure it for me so I can fab some nice ones...thanks bro..if it works out you get 20...

If you want i can probably make you a set for 40.00 + shipp spray paint included.

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

contact me on aim....sounds interesting...I'm good at fab and welding but 40 is a good deal to not hafta do it myself..

Hit me up man

I'll hit you up tomarrow, i am at work right now.
I will draw out the plans and price all the steel at home depot and hit you up on aim.

Terry


96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Originally posted by Star Turbo Talon
If you want i can probably make you a set for 40.00 + shipp spray paint included. Terry 96 Eagle talon ESI rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Interested here too. As long as they are sturdy and not wimpy.

Same grade as what tenzo makes.

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Any update on the brackets?? I'm interested and need them asap

ok i have the passenger drawn out, drivers is just a mirror image of that. i need a couple measurements on them yet will do that in a few hours and have the plans to you by noon. Really drawn nice too you will be happy.

Terry


96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Well Terry seemed like a cool guy. but a little typo on my part set him off and now I gotta go make my own brackets....

Scenerio.... For the past week I've been coversating with terry "Star Turbo Talon", he was gonna make brakcets for me. Well tonight he E-mails me saying he's done and to send money to his paypal account. Fine thats cool, here's the mistake. I said to him "what are you shipping" instead of how are you shipping. I've had a long night of studying and admit to writting the e-mail fast.

I had wanted to use my fed ex account to ship and that is why I wanted to ask how he wanted to ship, by a little mistake I got this in reply.
---------------------------------------------------------------------

What I am Shipping? What the hell have we been talking about? You asked me if I would make you a bracket for your tenzo seat, you asked me to make one because you don’t know how to read plans. You gotta be kidding me, my furnace has been taking a shit I could have been working on fabricating an inducer wheel to save 240.00, instead I worked on a bracket for your car and you have the audacity to ask me what I am shipping? You know what, go buy the brackets.



Terry

---------------------------------------------------------------------

Now I understand his frustration, his furnace is screwed up and ect ect...but damn all that madness towards me, when it was a typo.

I tryed E-mailing him back, with no response. I'm not sure if he was having a bad nght or what, All I wanted was the brackets. I never ment to piss him off...

So in front of the whole 2gnt community "I appologize for my typo"

Please terry get in touch so we can finish making arraingments....

I need some brackets too, I have two sitting in my room for the last year. But I think you also need to make custom sliders with it. I know they sell brackets and sliders separately.

Actually most placed give you the sliders when you buy the seats....really crapp they did not when you bought yours. The sliders i would buy and not try making, they only cost 45.00 a set last I checked.

Pushin as for your bracket....this weekend once i am off work i will contact you. I busted my a## late at night after work because you were looking for an update a day after i had the frame done. We discussed that these would have to be done during the week no promises on a day because i too work, long hours to be exact 12+ hours for the power company. You have been in a hurry the day i told you i could make you one. If you want a shipper to come get them thats fine i dont care. they will have to be at my house when i am home from work. If you dont want it..that fine it can sit with the cavalier bracket i once made.

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

If anyone else wants a set i can make them by next sunday..not this sunday. I would prefer a 20.00 deposit for two 10.00 for one via paypal. then 10.00 per bracket + shipping once completed. The down payment is for materials and a commitment. I dont want to make these brackets and then look at them every other day. I am not really making any money on these (7.00) and that does not cover the wire for my welder. So i am doing these for free basically. one bracket takes me about 4hrs to weld and fit/cut.

I personally paid 100.00 for mine a thought it was worth it.

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Cool, Your the man "Star Turbo Talon" Yeh you are right I was in a rush to get them. I thought I remember you saying to ask you on monday about them.

Um...As far as myself I still need them, and I'm sure there are a few others I talked to that would like them also. Why don't you put your paypal address here, and I will forward a deposit. I'm sure you will have more to follow also.

I can't wait to see them, but I hafta wait for my new carpet and that's about a week. The damn one from mitsu wasnt't right.

Thanks for replying Talk to you soon....

Pushin420a.....lee your bracket is done, there is no need for a deposit now. Pay me in full and i will shipor you can have fed Ex come get it. sorry there are no drop off fed ex companies around here. I think i know where a fed drop locations are if you want to get me a shipping label and fed ex box. Seems like more work than it is worth. If you weant me to make a second one then send me 20.00 deposit and i will let you know whne it is done....probably monday afternoon.

paypal ID terrence.godfrey@sbcglobal.net

if anyone else wants a set or just one contact me boefore sending any deposits ect (this should be obvious).

Terry



96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

did you ever sell your scanner?

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Payment sent...thanks