#66114, "Carbon fiber hoods" Feb-02-04 09:47 AM by TopShop
We are thinking about making our own carbon fiber hoods.With our hood you would not have to use hood pins, because we are going to have the factory steel underneath, so our hoods are going to mount like a factory hood,and factory hoods mount the best. Our hood will consist of 1/4"inch rolled edge.And our hoods are going to cost around 475 shipped.If we start making them who would be interesed in one?
#66125, "RE: Carbon fiber hoods" In response to Reply # 3
but how will the glue do with the constant changing in the temperatures? one of the 2 (steel or CF) may expand at a different rate, which I'd believe that they would, that would also affect the longevity of the glue...
just a couple of thoughts for you.... but I'm liking it...
#66132, "RE: Carbon fiber hoods" In response to Reply # 4
They say this glue will never release from the metal and the carbon fiber.We never had problems with the glue.All the hoods i have ever seen look like junk, and the fitment is bad.Thats why my boss is going to build hoods.If you have ever bought any of our parts you will know that are parts are the best fitting and look great. My boss allways says why sould people have to go though the hasle replacing parts. If you make great parts you sould not have any hasle installing them, and you would not need hood pins?
#66135, "RE: Carbon fiber hoods" In response to Reply # 5 Feb-02-04 01:59 PM by BCIEclipse
What type of resin are you going to use? Regular epoxy resin doesn't hold well to metal, i know from experiance. Also, i don't see the point of using the metal skeleton, it will be strictly cosmetic, it won't save much weight, seeing that a good part of the weight from the stock hood comes from the skeleton.
#66158, "RE: Carbon fiber hoods" In response to Reply # 6
the best way to do away with hoodpins would be to weave one solid peice if that is possible. Because either way you look at it its the fear of the glue coming apart that makes people get pins.
"We're the middle children of history, man. No purpose or great depression. Our great war is a spiritual war; our great depression is our lives. We've all been raised on television to believe that one day we'd all be millionaires and movie gods and rock stars. But we won't. And we're slowly learning that fact. And we're very , very pissed off"
Originally posted by turbo8u every time i get in it and start it up im like 'oh...yea, you know why you just started right there bitch? because i built you...yea...you like it dont you, yea and you're about to take this boost like a bitch too arent you
#66185, "RE: Carbon fiber hoods" In response to Reply # 2
Originally posted by TopShop The glue that we use to glue are other parts together holds about 1000psi per inch .The carbonfiber breaks apart before the glue gives.
It has before and I've MET 3 members who have lost their hoods from the CF itself tearing away. Hood pins are not hard/expensive how about some pre-holed hoods?
*Skrilla "Honest officer, I thought you were trying to race me" Talon: 1st 2.4L '97 Prelude '04 350Z
Originally posted by YourInMyMirror95GS dick teaser's should be rounded up and shot in the forehead
Originally posted by etx Good luck man! Project 'STFU Brian your talon is dead meat' should be on it's feet soon!
Originally posted by Dark0ne Thanks. Now excuse me while i fuck your sister.
#66171, "RE: Carbon fiber hoods" In response to Reply # 0 Feb-02-04 09:02 PM by scirio
Wouldn't mounting it on steel defeat the Purpose of a carbon fiber hood, that being the advantage of a light weight alternative to the heavier OEM hood?
AIM - scirio
Originally posted by a drunk DSMRoadster drink now and nafter goddanti! celebaeration birches!
#66187, "RE: Carbon fiber hoods" In response to Reply # 11
if you advertise a hood by saying that you do not need pins, expect some trouble. The best hoods on teh market still say to use them, because the risk is ALWAYS there. Even if you use factory metel, you are still holding the cf onto teh metel frame with glue. Bad mojo IMO.
Maybe if you have a double sided cf hood with a metel frame in between the two layers? Then in between all the lines of the skeleton teh carbon fiber could be touching and perhapse use the resing itself to help kepp everything together, PLUS the glue on teh metel.
#66205, "RE: Carbon fiber hoods" In response to Reply # 12
Yea, I'm kinda iffy about not running hoodpins on a cf hood. (I don't wanna go through that disaster again) Well, anyway, you doing a kind of sponsorship w/the hoods like you did for the headliners? If so, contact me AIM-pfmicks or pfmicks@msn.com...I would be very interested. Also, are you doing any other styles besides OEM..that evo hood is becoming ever more popular imo...make those too
User banned for scamming members on 2GNT, WIDSM, and CHITOWNDSM. This user and his brother Jason Ames have been involved with theft of parts from other DSM members. This individual is not trustworthy and should not be involved in any type of sale.
#66215, "RE: Carbon fiber hoods" In response to Reply # 13
Tell me bout it....u dont really wanna take chances with this expensive of a mod...( at least my vis was up there in price)...oh and BTW- VIS racing makes a GREAT hood with NO fitament problems whatsoever...so dont talk until u know for sure....
#66243, "RE: Carbon fiber hoods" In response to Reply # 14
Yeh the skeleton is where all the weight is at mostly. Down at the shop we make 100% carbon fiber hoods that weigh in at 6-8 lbs!! Never more than 8 lbs. Do we use a latch for the front? No! Why? Cause you should use should pins anyhow. Do we use a skeleton underneath? No, not even a fiberglass or carbon fiber one. What we use composite ribs that are 2-3" inches wide and 1/4 inch thick and use that as a sub-frame and laminate over that. Depending on the hood we will use a core mat also for stiffness. Yeh, there are the latches/hinges for the back like stock. Are they strong and good enough for the track? Well, down at Frank's we make hoods and bodies for the likes of Rado, V. Ten, M. Scranton, Proudfoot and a few other well knowns. Personally I have a hood from ProStreet and it is better than any IS I have seen, but nothing compares to the lightness of the hoods Frank makes. www.frankscustomfiberglass.com Leo carbonwerks.com
Search
Printer-friendly copy
1 User in Chat
