Here is the deal, i bought some xenon bulbs to get a fresh look and light up the road better. The only problem is that the stock 9005/9006 (high and low beam) bulbs do not fit in my projecter head lights. What type of bulbs do i need to get for my projectors to light up the road better? THanks

Chris

11.34 at 123 fp3065 28 psi straight pump 93 octane



95 tsi awd 5 speed-2gb 6 bolt dsmlink
95tsi fwd- parts
95 tsi fwd- beater
91 galant vr4- new build

You have to use the H3 bulbs unless you have dual projectors.

Jason
'11 Ford Mustang GT/CS
'11 Ford Mustang V6 6-Speed (SOLD)
'04 Nissan 350z Touring (SOLD)
'95 Turbo Eclipse GS (SOLD and will be missed)
'90 Talon TSi AWD (SOLD)

what ^^^ said. the dual projectors SUCK ASS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I hate mine so much that i disconnected the bulbs and bought some driving fog lights and drove around only with those. H3 bulbs go in the single projector holes as far as i know.


Undergoing MAJOR modifications, inside and out
member# 2498 / girl member# unknown

which projectors do I have? And then whic bulbs. THanks a lot.



There is a like a single halogen bulb in each spot high and low beams.


Chris

11.34 at 123 fp3065 28 psi straight pump 93 octane



95 tsi awd 5 speed-2gb 6 bolt dsmlink
95tsi fwd- parts
95 tsi fwd- beater
91 galant vr4- new build

Single projectors, and I am betting that you need the H3 bulbs. They are the same bulbs that are in our foglights. I highly suggest getting 75W or higher for the bulbs. I am running 100W, but they don't last long because of the heat. I drilled 4 holes in the rear backing plate of each bulb, and hopefully that will help them live longer.

Andy

Check out my homepage:
http://www.geocities.com/ozzmosis86/Home.htm

and my pics page:
http://community.webshots.com/album/95705837hSPLvt

another thing too, my bulb is connected with a connector. Like on speakers and shit. Im still not sure of what type of bulb i need.

11.34 at 123 fp3065 28 psi straight pump 93 octane



95 tsi awd 5 speed-2gb 6 bolt dsmlink
95tsi fwd- parts
95 tsi fwd- beater
91 galant vr4- new build

I think these are them:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33709&item=2449889767

11.34 at 123 fp3065 28 psi straight pump 93 octane



95 tsi awd 5 speed-2gb 6 bolt dsmlink
95tsi fwd- parts
95 tsi fwd- beater
91 galant vr4- new build

One last question... are high beam and low beam the same bulbs?

THanks for all the help.

Chris

11.34 at 123 fp3065 28 psi straight pump 93 octane



95 tsi awd 5 speed-2gb 6 bolt dsmlink
95tsi fwd- parts
95 tsi fwd- beater
91 galant vr4- new build

Those are the correct bulb for your low beam. I believe that the high beams use H1 bulbs. I'm not 100% sure though because it has been a long time since I've had those projectors.

Jason
'11 Ford Mustang GT/CS
'11 Ford Mustang V6 6-Speed (SOLD)
'04 Nissan 350z Touring (SOLD)
'95 Turbo Eclipse GS (SOLD and will be missed)
'90 Talon TSi AWD (SOLD)