Here is the deal, i bought some xenon bulbs to get a fresh look and light up the road better. The only problem is that the stock 9005/9006 (high and low beam) bulbs do not fit in my projecter head lights. What type of bulbs do i need to get for my projectors to light up the road better? THanks

Chris

You have to use the H3 bulbs unless you have dual projectors.

what ^^^ said. the dual projectors SUCK ASS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I hate mine so much that i disconnected the bulbs and bought some driving fog lights and drove around only with those. H3 bulbs go in the single projector holes as far as i know.


Undergoing MAJOR modifications, inside and out
member# 2498 / girl member# unknown

which projectors do I have? And then whic bulbs. THanks a lot.



There is a like a single halogen bulb in each spot high and low beams.


Chris

Single projectors, and I am betting that you need the H3 bulbs. They are the same bulbs that are in our foglights. I highly suggest getting 75W or higher for the bulbs. I am running 100W, but they don't last long because of the heat. I drilled 4 holes in the rear backing plate of each bulb, and hopefully that will help them live longer.

Andy

another thing too, my bulb is connected with a connector. Like on speakers and shit. Im still not sure of what type of bulb i need.

I think these are them:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33709&item=2449889767

One last question... are high beam and low beam the same bulbs?

THanks for all the help.

Chris

Those are the correct bulb for your low beam. I believe that the high beams use H1 bulbs. I'm not 100% sure though because it has been a long time since I've had those projectors.