my friend gave me his triple gauge pod and now i have some cool gauges just sitting there in my car. where do i run the wires to? there is a group of wires that come out of my exhaust downpipe. is that where they hook up? which color wires do i tap into? he also gave me an oil temp and vacuum gauge, where do these hook up?

tia

jason

Jason
---------------------
99 White GS
Tanabe Super Racing Medallion
Apex-I S-AFC, Springs
AF/X Underdrive Pulley
Fully tied suspension

you need to follow the directions i think each company has different color wires on there gauges.... so check the directions

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--

Air/fuel gets tapped to the o2 sensor. You should have 3 wires for this. Red-power, blk ground and maybe a purple wire which taps into the o2 sensor wire. (thats the autometer set up )

>you need to follow the directions i think each company has
>different color wires on there gauges.... so check the
>directions

like i said, my friend gave this to me, it has no instructions, no directions.

Jason
---------------------
99 White GS
Tanabe Super Racing Medallion
Apex-I S-AFC, Springs
AF/X Underdrive Pulley
Fully tied suspension

the a/f signal wire gets hooked to the wire from pin 30 on the top harness. should be a white wire with a black stripe.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals