I want to paint my headlight housing florecent orange, but how do i go about doing this? I see that Alex did it blue and it looks Great!


Any help would be appreciated!!




Dont Worry, My car is SLAMMED now, I will post pics soon!

There's a write up around here somewhere on it but I can't find it at the moment, basically it says to put your headlights in the oven at 250-300 just long enough to heat up the adhesive so you can pull the clear outer cover off of them. Then heat 'em up again and squish 'em together and let them cool. I would have tried everything under the sun before I thought of doing that, and I'm a cook.

EDIT-found it
http://www.auburn.edu/~fauchpj/headlight.htm


95ESI-intake,borla,sportlines,kyb,tsw
more on the way

with my 97 headlights, for some reason that looks like its unsafe to do...



Dont Worry, My car is SLAMMED now, I will post pics soon!

take off the headlights, put them in the over for a couple of minutes at 250 degrees. then pull them apart (warning, they will be hot). yes, this is what many of us have done with our 95-96 lights and 97-99 headlights. here's mine when i had my stock lights before the deer inncident(note: mine were 98 lights painted silver)


i used high temp engine enamel.

later

2GNT #1865
2006 Yamaha YZF R6 (Blue/Black)
2005 Honda CBR 600 RR (Blue REPSOL)
2003 BMW 325I Premium/Sport Package
2003 Honda CBR 600 RR (sold)
1998 Mitsubishi Eclipse RS (sold)
Shuwa's links:
http://www.facebook.com/Shuwa29
http://s16.photobucket.com/albums/b50/shuwa29/



DarkOne> but we all have that inner ricer that is just dying to come out sometimes...

why would it not look safe to do it with 97 headlights?

also.. who is alex?

^^what once was^^


^^what is now.. and permanently^^

well the name cyan is probably more framiliar, also, it just seems like that plastic covering for the headlights that is held on by the clips would melt in the oven. so is it a couple minutes u put em in for, or 5-7 minutes. I mean these are my only headlights and if this gets F'd up, i really dont feel like buying new ones. lol, also with that housing, do i have to scuff it, primer it and then paint it? Any other help would be cool. Thanks,

~ John.



Dont Worry, My car is SLAMMED now, I will post pics soon!

follow that write-up. the plastic will not melt and if you cannot pull them apart with your hands, put them in for another minute...do not pry them apart because you can crack something. i did not scuff, sand, primer, or anything. i just painted over the housing. dont worry, if you dont leave them in the oven too long you wont have any troubles. i would sugest white though instead of the florescent orange.

this process sounds interesting, but my only worry would be that the lense would start building up condensation if not properly resealed. Has this happened to anyone?

use a damn heat gun or blower dryer if you're that paranoid.
later

2GNT #1865
2006 Yamaha YZF R6 (Blue/Black)
2005 Honda CBR 600 RR (Blue REPSOL)
2003 BMW 325I Premium/Sport Package
2003 Honda CBR 600 RR (sold)
1998 Mitsubishi Eclipse RS (sold)
Shuwa's links:
http://www.facebook.com/Shuwa29
http://s16.photobucket.com/albums/b50/shuwa29/



DarkOne> but we all have that inner ricer that is just dying to come out sometimes...