My turning signals been acting weired. It will just quit working. Did this happen to any of you guys? The bulbs are fine because when I push the hazard they both blink. I really don't see where it could possibly causing it to not work. any ideas? HELP!!!
#49238, "RE: turning signals...aka blinker lights...HELP!!" In response to Reply # 0 Jun-02-03 04:46 AM by jerseystyle1
My left rear one did the same thing. I had to replace the blinker relay, which for my year was behind the heater controls and radio. The only place who sold it was satan and it costs a whopping $63! It was a small black box with a circuit board in it. Good Luc
Allan 2008 Magnetic Black 350z NISMO /1976 Austin Mini 1098 Special (export)
#49248, "RE: turning signals...aka blinker lights...HELP!!" In response to Reply # 1
>My left rear one did the same thing. I had to replace the >blinker relay, which for my year was behind the heater >controls and radio. The only place who sold it was satan and >it costs a whopping $63! It was a small black box with a >circuit board in it. Good Luc
Hey, did they just die all the sudden? See, the blinkers acting like this about a year ago too. But one day it just came back and worked fine till this weekend. Is there anyway of checking this? Or is it just work or die type thing. I need to check it out...
#49275, "RE: turning signals...aka blinker lights...HELP!!" In response to Reply # 3
Oh great. I remember reading a post about a stuttering problem that I didn't have and the next day? I was misfiring like a mofo. Now I'm reading about this with all my signals functioning perfectly... I am so screwed.
#49289, "RE: turning signals...aka blinker lights...HELP!!" In response to Reply # 4
I wrote a post a while back, about the problem with the ground on the rear blinkers...The ground on the rear blinker lights becomes extremely loose..My brake lights and blinkers wouldn't work correctly..I got pissed off so just ripped the ground wire out of the headlight socket..Then I just Soldered it to the metal portion of the socket, voila..haven't had a problem since!
#49315, "RE: turning signals...aka blinker lights...HELP!!" In response to Reply # 5
>I wrote a post a while back, about the problem with the >ground on the rear blinkers...The ground on the rear blinker >lights becomes extremely loose..My brake lights and blinkers >wouldn't work correctly..I got pissed off so just ripped the >ground wire out of the headlight socket..Then I just Soldered >it to the metal portion of the socket, voila..haven't had a >problem since!
So when it happend, did your hazards workded? because my hazards work fine and brake lights too..
Search
Printer-friendly copy
6 Users in Chat
