| Go back to previous topic |
| Forum name | Interior/Exterior |
| Topic subject | turning signals...aka blinker lights...HELP!! |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=49237 |
49237, turning signals...aka blinker lights...HELP!!
Posted by coppereclipse95, Jun-02-03 04:36 AM
My turning signals been acting weired. It will just quit working. Did this happen to any of you guys? The bulbs are fine because when I push the hazard they both blink. I really don't see where it could possibly causing it to not work. any ideas? HELP!!!
|
49238, RE: turning signals...aka blinker lights...HELP!!
Posted by jerseystyle1, Jun-02-03 04:45 AM
My left rear one did the same thing. I had to replace the blinker relay, which for my year was behind the heater controls and radio. The only place who sold it was satan and it costs a whopping $63! It was a small black box with a circuit board in it. Good Luck:thumbsup
|
49239, RE: turning signals...aka blinker lights...HELP!!
Posted by ibangdchoeclipse, Jun-02-03 05:59 AM
same thing happen to me havenbt fixed it yet tho been looking everywhere for the relay
|
49248, RE: turning signals...aka blinker lights...HELP!!
Posted by coppereclipse95, Jun-02-03 10:15 AM
>My left rear one did the same thing. I had to replace the
>blinker relay, which for my year was behind the heater
>controls and radio. The only place who sold it was satan and
>it costs a whopping $63! It was a small black box with a
>circuit board in it. Good Luck:thumbsup
Hey, did they just die all the sudden? See, the blinkers acting like this about a year ago too. But one day it just came back and worked fine till this weekend. Is there anyway of checking this? Or is it just work or die type thing. I need to check it out...
|
49275, RE: turning signals...aka blinker lights...HELP!!
Posted by DR1665, Jun-02-03 03:12 PM
Oh great. I remember reading a post about a stuttering problem that I didn't have and the next day? I was misfiring like a mofo. Now I'm reading about this with all my signals functioning perfectly... I am so screwed.
I better go get me some blinker fluid QUICK! :P
|
49289, RE: turning signals...aka blinker lights...HELP!!
Posted by skid13, Jun-02-03 06:44 PM
I wrote a post a while back, about the problem with the ground on the rear blinkers...The ground on the rear blinker lights becomes extremely loose..My brake lights and blinkers wouldn't work correctly..I got pissed off so just ripped the ground wire out of the headlight socket..Then I just Soldered it to the metal portion of the socket, voila..haven't had a problem since!
|
49293, RE: turning signals...aka blinker lights...HELP!!
Posted by ibangdchoeclipse, Jun-02-03 07:45 PM
could find this post can you be more specific on what you did
|
49315, RE: turning signals...aka blinker lights...HELP!!
Posted by coppereclipse95, Jun-03-03 06:09 AM
>I wrote a post a while back, about the problem with the
>ground on the rear blinkers...The ground on the rear blinker
>lights becomes extremely loose..My brake lights and blinkers
>wouldn't work correctly..I got pissed off so just ripped the
>ground wire out of the headlight socket..Then I just Soldered
>it to the metal portion of the socket, voila..haven't had a
>problem since!
So when it happend, did your hazards workded? because my hazards work fine and brake lights too...:wary
|