Did you guys with blitz rear had any gap problems? I got a gap between the taillights and the bumper. The bumper sticks out far enough to creat a gap, which i can see the inside of the bumper. I was thinking about doing some fiberglass filling..but it would still look like its hanging out...

1995 Eclipse RS

what brand is it? You might have to fill it

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

With both sides bolted on, see if the bumper can be screwed or bolted under the center tail section. If not, more bondo or fiberglass work is needed. Oh yeah what brand?

95 GST | So-Cal

its gtp, importfan. I'm shooting for the stock flush look between the taillights and the bumper. the smoother the better but, its not looking like it will...

1995 Eclipse RS

I had that same gap in my VIS rear. Filled it with a lot of bondo. Put a lot behind it to reinforce it. It hasn't cracked in 1.5 years. Fiberglass would take too long to fill that hole in my opinion. I was lazy so I just filled it all with bondo.

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

Look at my rear end. I have the blitz and I molded the sides and I had to fill in around the lights. Took some time but came out nice





cardomain.com/id/mitifto

Your Garage is not worthy
For the Masterpiece you built
That only looks like it cost a Fortune
While most flaunt their cars by going fast
You show off Standing Still