| Go back to previous topic | |
| Forum name | Interior/Exterior |
| Topic subject | Blitz rear fitment |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i7&topic_id=42964 |
|
42964, Blitz rear fitment Posted by coppereclipse95, Mar-19-03 05:41 AM Did you guys with blitz rear had any gap problems? I got a gap between the taillights and the bumper. The bumper sticks out far enough to creat a gap, which i can see the inside of the bumper. I was thinking about doing some fiberglass filling..but it would still look like its hanging out... | |
|
42971, RE: Blitz rear fitment Posted by HondaHater21, Mar-19-03 07:14 AM what brand is it? You might have to fill it | |
|
42978, RE: Blitz rear fitment Posted by Clay, Mar-19-03 07:53 AM With both sides bolted on, see if the bumper can be screwed or bolted under the center tail section. If not, more bondo or fiberglass work is needed. Oh yeah what brand? | |
|
42979, RE: Blitz rear fitment Posted by coppereclipse95, Mar-19-03 07:54 AM its gtp, importfan. I'm shooting for the stock flush look between the taillights and the bumper. the smoother the better but, its not looking like it will... | |
|
42987, RE: Blitz rear fitment Posted by eclipse804, Mar-19-03 12:23 PM I had that same gap in my VIS rear. Filled it with a lot of bondo. Put a lot behind it to reinforce it. It hasn't cracked in 1.5 years. Fiberglass would take too long to fill that hole in my opinion. I was lazy so I just filled it all with bondo. | |
|
43004, RE: Blitz rear fitment Posted by mitifto, Mar-19-03 04:58 PM Look at my rear end. I have the blitz and I molded the sides and I had to fill in around the lights. Took some time but came out nice | |
