money's quite a large issue for me since i pay for everything myself off a 5.25/hr job and i was looking for a body kit but i can't really afford the tons of excess money for molding etc. Do any come that are bolt on or close enough, i realy only want a front bumper and factory skirts for my 98 rs. Is the stillen or any blitz's a perfect fit?

Nos Fogger Kit,AemCAI, TopFuel UDP, pacesetter cat-back, ARD bored 57mm t.b., P&P intake mani, Ractive front/rear strut bars,rear tie bar,eibach sportlines,tokico blues, morosso wires, ngkIX plugs, konig subzeros,proj. heads,gunmetal tails, rev.indiglow gauges,reverse light mod

the best thing for you to do would be to find a used one that is in good shape and matches your car color. that way you don't have to pay for painting and stuff. the factory sides are direct bolt on as long as they are the right color. if you get a good quality front it should basically only need painting.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

isnt 6.75 min wage? what country u in? and im not sure bout the kit sorry.

-mitsuman 95 GS 5-spd w/97-99 front end
Repin The SoCal 2GNT'ers
mitsuman95@hotmail.com
AIM s/n : mitsuman95gs

the bomex kit is direct fit and fitament is great but the kit is expensive,

go to library learn how to use bondo and fiberglass resin and make a vis racing kit work not too hard,

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

>isnt 6.75 min wage? what country u in? and im not sure bout
>the kit sorry.
>

i'm pretty sure the minimum wage is still $5.25, or atleast it was last time i had a job.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

In cali its $6.75

I was right there with him untill the light turned green.

yeah in Texas its 6.75, the further north you go, the minimum wage lowers because they have unions and such.

importfan has a good fitting kit. it is a good bolt on and its doesnt really require fitting with bondo or fiberglass. All i had to do is pull and strech it over the front bumper

______________________________________

11.65 @ 115

Here in Illinois is still $5.25.

'99 GS 5-spd Silver
-GReddy Evolution Cat-back
-AEM CAI
-Alpine Deck (CD of course)
-2 MTX ThunderPro 6000 12" subs
-5 piece Bad Boyz Neon Under car kit (Horizon Blue)
-Clear Tail Lights

7.02 here for minimum now...

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

lol its 5.25 here in kansas



Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

The more north you go, the cheaper the cost of living...

$5.25 here baby! But my bills are also like $325/month

'98 Talon Esi
Apex'i N1 Catback Exhaust|Greddy 4-1 Header|Bosch Platinum +4 Plugs|Iceman CAI|Upper Front & Rear Strut Bars|

___________________________________

5.50 in nyc.

96 gs-t
To much shit to list.


Remdawgz@aol.com

96 gs-t
To much shit to list.


Remdawgz@aol.com

i would say avoid buying a body kit front from ebay. find a used one that has already been fitted on a car.

Basicaly the rule of thumb is the more you pay the better the fit. Bomex kits and other name brand kits are so much money because the molds are all 1st runs ie not copies. The lower price kits are copies of bumpers sometimes they may even be 3rd or 4th copies and as we all know the more times you copy a copy it gets worse and worse. As far as I have been told importfan.com is a decent fit for a good price.

$5.25 here in Arkansas

Slacker Motorsports
Some stuff......

6.75 in Washington

urethane kit are more expensive but easier to fit. You can just use a knife to trim it. And NO the blitz kit doesn't fit right.

>5.50 in nyc.
>
>96 gs-t
>To much shit to list.
>
>
>Remdawgz@aol.com

nyc should be 9 or more

ri.....6.15 or 6.25 or 6.45 or something like that, can't remember....lol

or maybe 6.75