what device would make leds blink when power is hooked up, i want some leds to blink when turned on

any idea what kind of component i need?

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

i think this is the circuit diagram your looking for

http://www.uoguelph.ca/~antoon/circ/2qflash.htm

and this is the page it came from, it has alot of good stuff

http://www.uoguelph.ca/~antoon/circ/circuits.htm

if not here is another page that might have it
make sure and check out the whole page it has alot of links on the bottom half. it has circuit diagrams for just about anything you would want an LED to do.

http://www.discovercircuits.com/L/LED.htm

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

thats what i was looking for but, damn tis like jibberish to me,

what im trying to do is hook up some leds to my brake lights circuit so when they are applied these other lights come on and then when u let off brakes it opens the circuit back up and they turn off thats simple, but now im lost with all the electronics names r3, c1 and such argh i guess i figure it out.. unless somone wants to lend a hand on this thread so i can get these parts..

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

so you want a brakelight flasher?

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

i will get you a list of components and make you a 3D model(hopefully) but i need you to look at that first link and decide what flash rate you want, also color of LED and how many perside. basically i need to know exactly what your wanting and what you want it to look like.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

need a minimum of 5 leds, or 5 lit up areas the 140/min sounds good,
possibly 12 leds,

the leds are not that big of deal i can get those, im looking at red leds, hypers http://www.mpja.com/product.asp?product=11017+OP

3000mcd or brighter is what im looking for some bright ones they are cheap i could wire in 4 or so trying to light up the letters talon on my car so T A L O N 5 spots maybe couple per section,

the 140/per min sounds about right i have a general knowledge of electrocis i jsut got lost in the abriviations they had on those sites i got 2 electronic books from library to help do this with...

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

what about this set up but instead of the 3rd brake light how ever many leds you want. they just need to be wired in parallel with a dropping resistor.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

D is for diode, R is for resistor and C is for capacitor. The valus are on the bottome of the diagram, write them down, goto radio shack and tell them u need that, then connect them as shown in the figure

jZa
IHS # fo-six-fo-six

"real men don't ride stick"

wow... im ok with electronics, can you guys draw me up some schematics so i can aolder up a circuit for our back lights... you know where it says ECLIPSE ... thanks

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

>wow... im ok with electronics, can you guys draw me up some
>schematics so i can aolder up a circuit for our back lights...
>you know where it says ECLIPSE ... thanks
>
what do you want it to do? details

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals