ok, i am sick of my stock lookin engine bay, and i want to know how you made the valve color chrome (polished) or how what kind of paint do you use? obviously you have to take off the valve cover, does any one have a writeup for that? TIA

______________________________________

11.65 @ 115

Step 1; Valve Cover Removal is simple 3 bolts front 2 bolts middle 3 bolts rear and just pop it off (it might be stiffly planted to give it a tug) make sure you keep up with all the gaskets 1 big edge one and 4 rings for spark plug wells... Now clean the heck outa the cover... just dont use paint thinner or cutter of any kind or it will soak into the metal and youll have to wait a good month before any paint at all will stick

Step 2; Decide if you want it polished or painted if you want it polished get a dremel and good sanding bit and go to work... If you wanted painted no problem any old Dupli Color paint will stand up to the heat (you dont even need the "engine 1500 degree kind" just some normal enamal... Either way you go id suggest clear coating it or it will get dirty very fast...

Step 3; Reinstalling it is easy just slap the bolts back in and use your own or a borrowed torque wrench to tighten the bolts to manual spec... DO NOT I REPEAT DO NOT just tighten them on without using a torque wrench or over the period of about a week the valve cover will warp and you will never get it to stop leaking.

198hp @6350 rpm NA 420A (Thanks to new JE forged 9.5:1 Deep Dishers ready for Zex Nitrous 150 Shot) -THIS IS NOT MY CAR ITS A FRIENDS!

Bro why you pimping this car as your's........ that isn't your ride so why you being a fake ass and stealing someone else's ride that they put a lot of time and money into. I think you should have checked out the website you stole that pic from and realized that the car you pimping is part of the 4G63 family and it's not a 420A NA and i doubt that is makes 187 HP NA............. You give people a bad name and fuck up the respect that the rest of us deserve. We are the ones that have put the time and money into our cars not you...... why don't you stop the bullshit and step!!!!!!!!!!

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--

In another post,he says that the car is his friends. So.. *shrug* i dunno haha.

frankly i dont give a shit if it is his car, as long as he is cool and helps out he deserves to be here, but we do want to see some pics of your car

Thanks for the help

______________________________________

11.65 @ 115

If you polish have fun it takes alot of time to do it and the some of the places are a major PITA to sand. I am hand sanding mine any other way and you will end up with major waves in it.

Slacker Motorsports
Some stuff......

Ok first off ChryslerKid thanks for some support good god, second off I NEVER said it was my car and it's not a 4G63 its a 420A Ill send you a pick of the engine bay so you can go slap yourself third off you can doubt 187 all you damn well wan't and you know what your right its not pushing 187 its a little improved seen as this week we took the liberty to install some new JE pistons now screaming at 198, anyway I have a slight problem if anyone out there can tell me... With the new pistons we keep getting alot of detenation in cylinder 3 its only in 3 1 2 and 4 are fine and running strong... Has anyone ever installed these pistons and had similar problems? If so please post an explination or send me a message we need to get this fixed ASAP... (also one more thing that might help after a good 2 or 3 strip runs we drop to about 8:1 compression then after cooling go back up to the normal 9.5:1 and again this is only in cylinder 3...)

As for Icedout and his rude ass comments all I can say is the way you treat people is the way you deerve to be treated, so it wouldn't bother me mutch if you rapped your car around a telephone pole, anyway I am disgusted to call you a part of the 2gNT team you don't help anyone do anything but argue... Oh and one last comment YOUR PIECE OF SHIT LOOKS LIKE SHIT WITH NO SIDE SKIRTS COME TO MS AND ILL RUN YOUR SLOW SIDESKIRTLESS ASS OVER (excuse the anger I am sick of people argueing with me just because I like my friends car, I work on it just as much if not more than he does so I feel I have a right to post a pic of it on my signature)

198hp @6350 rpm NA 420A (Thanks to new JE forged 9.5:1 Deep Dishers ready for Zex Nitrous 150 Shot) -THIS IS NOT MY CAR ITS A FRIENDS!

420A? Looks more like a 4G63 to me...

http://eliterides.com/mitsubishi/eclipse/eclipse4/ <--_ Theres the car, it's really nice....but it's no 420A...Good story though.

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

Tell you what when I change the post pic with the same exact car youll shit your pants when I show you the 420 motor (heck ill take a pic of me hanging upside down over the car) whatever tweaks your boat enough for you to be satisfied its my car... err my friends car

198hp @6350 rpm NA 420A (Thanks to new JE forged 9.5:1 Deep Dishers ready for Zex Nitrous 150 Shot) -THIS IS NOT MY CAR ITS A FRIENDS!

Hello all I am new to the forum just reading a few posts... Why do you guys have to be so mean to this guy RSConversion he is prbably not able to afford as nice of cars as you guys and might be embarrased by it... So what if he posted a fake pic he is a human just like everyone else? Anyway I think polishing the valve cover looks good but like mentioned use sandpaper not a dremel or it will cause wavey looks. Hey if anyone is nice enough think you could give me a rating I wan't to see if I can't get enough to get one of those star thingys...

Its no Ferrari but at least it's not a Honda! (Don't worry this is an old pic my car now has much done to it including Konig 17" Tantrum rims, Bomz Aluminum Wing, Blitz Body Kit, Aerogea

Ah fuck it thanks for some support Whitey I am so sick of being a loser anyway I guess Ill be leaving the forum my rep probably sucks so bad no one will listen to me now... I left you that feedback you wanted and welcome to a great forum just dont get on peoples bad side they have no remorse

P.S. to all thats not my car or my friends car and it is a GSX and I am sorry for the lies just wanted to fit in...PEACE EVERYONE

198hp @6350 rpm NA 420A (Thanks to new JE forged 9.5:1 Deep Dishers ready for Zex Nitrous 150 Shot) -THIS IS NOT MY CAR ITS A FRIENDS!

Thanks for the feedback bro and I am sorry to hear your leaving hope you don't get this crap at another forum peace out.

Its no Ferrari but at least it's not a Honda! (Don't worry this is an old pic my car now has much done to it including Konig 17" Tantrum rims, Bomz Aluminum Wing, Blitz Body Kit, Aerogea

Hey, welcome to the board. Check out my website, my car will probably look very familar.
http://www.angelfire.com/al4/totally_eclipse
These cars are slow NT, but I finally beat somebody at the strip last night. I am so excited, now I'm hooked!
Again welcome to the board, and if you could leave me feedback that would be great. I wondered how you were suppose to get it. Thanks.

Heather

95 RS, AFX Underdrive Pulley, Front and Rear Strut Tower Braces, Front Lower tie bar, OBX Header, Final Drive Mod, Konig Traffic rims with Kumho Ecsta Supra Tires, Accel Spark Plug Wires, Dynomax Exhaust, Optima red top Battery, Air Intake, Z3 Fenders (T

>P.S. to all thats not my car or my friends car and it is a
>GSX and I am sorry for the lies just wanted to fit
>in...PEACE EVERYONE

You don't need an awesome car to fit in around here. This is a somewhat mature forum - if someone is lieing, then they will be pointed out...but it's really not a big deal. There are people on this board that don't even own 2GNT's, and some who are completely stock just looking for info, but they still fit in just fine. This board is a source for information. Don't you agree that it would be tough for people to take advice and info from someone that completely lied about they're car and experience they've had with it? (Paint you havn't used/painted, suspension mods you've never heard of..)

Post your real car, repair your reputation and move on.. as long as you know it's not cool to steal pics of other people hard work and say it's yours...

p.s. Please don't go to another forum and say that my car is yours....I've invested a lot of money and work into it, I think I deserve the credit, right?

~Ryan

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

yeah

http://www.ocaddict.com

thanks beefgg for the sig

>Ah fuck it thanks for some support Whitey I am so sick of
>being a loser anyway I guess Ill be leaving the forum my rep
>probably sucks so bad no one will listen to me now... I left
>you that feedback you wanted and welcome to a great forum
>just dont get on peoples bad side they have no remorse
>
>P.S. to all thats not my car or my friends car and it is a
>GSX and I am sorry for the lies just wanted to fit
>in...PEACE EVERYONE

Simple as this, just get a picture of your car not your friends GSX and you'll be straight. Once you do that the negative energy will go away.

_____________________
98 Silver Eclipse RS ATX
CAI, header, bored TB, Apex N1, Pro-kit/Tokico combo, custom lower tie bars, cross drilled/slotted rotors

Damn, who fuckin cares what his car looks like, he helps out on this board which is more than i can say for most of you damn theirs alot worse things out there than a guy using a pic of somebody elses eclipse,

and comon whitey is using a pic off of ebay, but why should you care ?

______________________________________

11.65 @ 115

I'm just trying to help him out

_____________________
98 Silver Eclipse RS ATX
CAI, header, bored TB, Apex N1, Pro-kit/Tokico combo, custom lower tie bars, cross drilled/slotted rotors

You know what your right I am using a pic off ebay =D (im guessing you noticed the iPIX Icon in the corner right but it is my car I bought it off ebay about 2 months ago and even though its an RS I am very proud to own it...Heres some more pics.... But they are old like I said I will get new ones of my mods soon. As for RSConversion it's aight man just treck on people are cool they will forgive and forget bro.





These are all off ebay from the Texas dealership where my car was purchased the car is now much cleaner and has a bit of mods (not to much but hey I am trying) also the engine bay looks 100% better with a strut bar, intake, painted valve cover, silicon hosing, wire loom, and more... Oh btw before you go hating on my car I am only 17 with a small job and school so gimmie a break.

Its no Ferrari but at least it's not a Honda! (Don't worry this is an old pic my car now has much done to it including Konig 17" Tantrum rims, Bomz Aluminum Wing, Blitz Body Kit, Aerogea

damn, it's not a 420a motor! it's a 4g63 turbo motor. god, the stupidity is high today. maybe tomorrow will be better when a certain someone no longer post.
later

2GNT #1865
2006 Yamaha YZF R6 (Blue/Black)
2005 Honda CBR 600 RR (Blue REPSOL)
2003 BMW 325I Premium/Sport Package
2003 Honda CBR 600 RR (sold)
1998 Mitsubishi Eclipse RS (sold)
Shuwa's links:
http://www.facebook.com/Shuwa29
http://s16.photobucket.com/albums/b50/shuwa29/



DarkOne> but we all have that inner ricer that is just dying to come out sometimes...

As for Icedout and his rude ass comments all I can say is the way you treat people is the way you deerve to be treated, so it wouldn't bother me mutch if you rapped your car around a telephone pole, anyway I am disgusted to call you a part of the 2gNT team you don't help anyone do anything but argue... Oh and one last comment YOUR PIECE OF SHIT LOOKS LIKE SHIT WITH NO SIDE SKIRTS COME TO MS AND ILL RUN YOUR
SLOW SIDESKIRTLESS ASS OVER (excuse the anger I am sick of people argueing with me just because I like my friends car, I work on it just as much if not more than he does so I feel I have a right to post a pic of it on my signature)

RsConversion....... GFY.... when you think you have the juice to step up to the plate bring it on..... as far as i'm concerned your a loser that keeps talking about this car you have and it's big amount of power..... So where's the dyno charts to back up these BS numbers. As far as your comments about side skirts i'v had them for a long time and have posted my pics of MY CAR FINISHED!!!!!! more than anything that you have posted which is ZERO!!!!!!!!!!!!!!!!!!
As far as me being slow look again my 1stGenX will shit on you and then some......
And i guess your not too edgemicated
because you failed spelling!!!!!!!!!!!
mutch is much
rapped is wrapped
argueing is arguing

Get your shit in check before you come to the ballpark to play.... especially if you plan on playing in NYC!!!!!!!!!!!!
WHAT UP SON!!!!!!!!!!!!!!!!!!!!!!!!!

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--

SAT DOWN

I B T L

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

198hp @6350 rpm NA 420A (Thanks to new JE forged 9.5:1 Deep Dishers ready for Zex Nitrous 150 Shot) -THIS IS NOT MY CAR ITS A FRIENDS!-


damn, this shit is a conspericy, scandal, and a cover up!!! what the hell are we going to do!? hopefully it's like in office space, "the problem will just fix itself". that's my idea again.
later

2GNT #1865
2006 Yamaha YZF R6 (Blue/Black)
2005 Honda CBR 600 RR (Blue REPSOL)
2003 BMW 325I Premium/Sport Package
2003 Honda CBR 600 RR (sold)
1998 Mitsubishi Eclipse RS (sold)
Shuwa's links:
http://www.facebook.com/Shuwa29
http://s16.photobucket.com/albums/b50/shuwa29/



DarkOne> but we all have that inner ricer that is just dying to come out sometimes...

maybe we should find out what mods he has done before we hang him for sayin he's near 200hp NA

besides todd is doing 15.4 on minimal mods so hp doesn't mean much realy

http://www.ocaddict.com

thanks beefgg for the sig

true, but this kid is claiming a 4g63 is a 420a! that's enough right there.
later

2GNT #1865
2006 Yamaha YZF R6 (Blue/Black)
2005 Honda CBR 600 RR (Blue REPSOL)
2003 BMW 325I Premium/Sport Package
2003 Honda CBR 600 RR (sold)
1998 Mitsubishi Eclipse RS (sold)
Shuwa's links:
http://www.facebook.com/Shuwa29
http://s16.photobucket.com/albums/b50/shuwa29/



DarkOne> but we all have that inner ricer that is just dying to come out sometimes...

>true, but this kid is claiming a 4g63 is a 420a! that's
>enough right there.
>later
know the facts before you hate, damn he's said since his very first post that that wasnt his car but his friends gsx, he has a 2gnt, but THAT IS NOT THE PIC OF IT !!! damn you should read the full post first. ALL OF YOU!!!!!

>Ok first off ChryslerKid thanks for some support good god, second
> off I NEVER said it was my car and it's not a 4G63 its a 420A Ill
> send you a pick of the engine bay so you can go slap yourself third
> off you can doubt 187 all you damn well wan't

i'm guessing you guys cant read well cause he just said HE DOESNT HAVE A 4G63 CAUSE ITS NOT HIS CAR. HIS CAR HAS A 420A

______________________________________

11.65 @ 115

the shit that he spit out is so high there is no way to cycle through it all. like i said before, the problem will fix itself.
later

2GNT #1865
2006 Yamaha YZF R6 (Blue/Black)
2005 Honda CBR 600 RR (Blue REPSOL)
2003 BMW 325I Premium/Sport Package
2003 Honda CBR 600 RR (sold)
1998 Mitsubishi Eclipse RS (sold)
Shuwa's links:
http://www.facebook.com/Shuwa29
http://s16.photobucket.com/albums/b50/shuwa29/



DarkOne> but we all have that inner ricer that is just dying to come out sometimes...

Well rsconversion is a confirmed lier !!!! So now that we got that out the way lets movw on....By the way I have seen both of icedout's cars. The Rs is a full out show car (with skirts) and the gsx will whoop most peoples ass!!


96 gs-t
many mods in transit !!

Remdawgz@aol.com

96 gs-t
To much shit to list.


Remdawgz@aol.com

>Well rsconversion is a confirmed lier !!!! So now that we
>got that out the way lets movw on....By the way I have seen
>both of icedout's cars. The Rs is a full out show car (with
>skirts) and the gsx will whoop most peoples ass!!
>
>
>96 gs-t
>many mods in transit !!
>
>Remdawgz@aol.com

OMG dude did you even read any of the posts, he didnt lie about any thing, you all jumped the gun, qoute a spot where he lied if you can

______________________________________

11.65 @ 115

he said he lied and the car was his friend's gsx. There are plenty of 4G63ers here. They are dsms so they are welcome here. Why lie? There has been too much lying on here lately with scamming, etc. Nobody likes or trusts liars. That's why people are flaming. Personally, I don't give a fuck. But, why claim 187 HP NA and BS around like you know wtf u are talking about? ALl it does is lead up to a BS hijacked thread like this one. LOCK THIS SHIT UP.

>>P.S. to all thats not my car or my friends car and it is a GSX and >>I am sorry for the lies just wanted to fit in...PEACE EVERYONE

How can you say he didn't lie? He admitted it.

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

Ive been here reading all the posts about this topic and there is only about 3-4 posts about the valve cover question out of 30. See anything wrong with this. Yeah he lied, but he admitted it, after a lot of hell but he did admit it. Truthfully i could care less if the car is his or what he is claiming about it, because I only belive things when i see them. The picture of the car does nothing for me as far as asking a question about something, words do. I would hate to see a member leave the site because of a picture he posted of a car. You never know he might have some usefull info for us about a certain topic he or she might ask later down the road, but he wont be able to help us out because he got yelled at because of a car he posted. RS should of posted his own car because no matter if it is a moded out 2gnt or a bone stock 2gnt it still is a 2gnt. Thats why the site was made, for the love the the second generation non-turbo eclipse/talon. Like I said before, I could care less about a pic so to me it really doesn't matter much. I've been reading the things on this site for a while but only been a member since Aug. I think, and over the last couple of months I've seen a lot of people catching hell about this or that. Come on guys this is an information site. I know sometimes something needs to be said but it turns into about 20-30 people saying the exact samething over and over again. Yeah he most likely felt bad for being called out like that but once everybody jumped in he felt like he was no longer welcome on the board when he was. Im my opinion this topic should of been locked a long time ago but I'm not a moderator. So, RS if you read this I would like for you to stay a 2gnt member because I would love to hear what you have to say about any question I might ask in the future, and I'm sure I'm not the only person that feels this way. I don't care if you post a pic of someone else's car or not or even own a 2gnt or not. As long as you think you might have some info that the guys and me could use your welcome here anytime in my book. I'm here for the info and not all the BS.......Later

dfres

will post more pics when front is painted

I think it wasnt so much the matter that he posted a pic of another's car but that he acted really informed about things associated with the car. For me, giving out bad advice and mis-information is way worse that posting another's car. He posted about having an AEM standalone in his N/A, about cutting springs(Yikes!!) and how to rattle can spray your exterior. If someone trusting and not informed were to follow his ridiculous ideas, they would end up in a very bad spot after cutting their springs and spray painting their exterior and wasting 1600 on a computer they wouldnt be able to use without serious modifications. That is why I don't like what he was all about, not the picture.
just my .02...
-Chris b.

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

So back on topic

Can you just use normal high temperature engine paint or is this stuff still gonna flake and crack off??

I'm guessing powdercoating the valve cover is the only safe way to go, right?

-----------------
1997 Eagle Talon ESi
Check out more pictures here: http://mikelaidlaw.tripod.com



MODS
-----
Blitz Front Bumper - Invader Type 1 Side Skirts - 17" Gunmetal Motegi MR7's - Final Drive Gear Mod - H&R Lowering Springs - 97 Eclipse Headlights - Taillight Mods - Interior Colouring/Lighting/Accessories - Stereo - Intake Filter, Plugs and Wires

I know you can use High Temp engine paint, but the color selection is limited. Also you could use the same enamel that is used to paint brake calipers. It costs more, but it gives a nice almost powdercoated look, because you actually bake it on.
-Chris b.

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

What's up everybody. Like the site. Just stopping by to add my 2 cents. I was with my friend from EliteRides when he took the pics of that car for the site. EliteRides is based out of Salt Lake City, UT. So...

"...COME TO MS AND ILL RUN YOUR SLOW SIDESKIRTLESS ASS OVER"

Atleast he admitted it's not his. But, no it is not in MS. Last I heard Adam (the owner) was still living in Utah. Those pictures were taken in downtown Ogden, UT.

"I think you should have checked out the website..."

"... it is a GSX"

Yes, it is a GSX. If you look at Adam's vehicle profile it says right on there "1996 Mitsubishi Eclipse GSX"
Here's his link again. http://eliterides.com/mitsubishi/eclipse/eclipse4

"I think you should have checked out the website you stole that pic from..."
Especially because it's ©

Again, like the site. Nice cars everyone. Wish you all the best of luck with everything!