Ok before you say anything because I know you're thinking, who the hell would shave their antenna? Well I am basically because 1)I dont listen to the radio and 2) I dont even have the hook up for it on my unit so there is no purpose for it being there. So since I'm getting a paint job soon anyways I figure I might as well just shave it. Anyone have any suggestions? Will bondo work? any other product?

thanks,
(PS if you know anything about primering please respond to my other post please)

-EnDeR

well, it will work, buuuut, another alternative is to get one of those s2000 antennas that stick up maybe 4 inches, those look pretty smooth, but if you wanted it completely shaved then yes bondo will work, and yes get a pro to do it

1993 Eagle Talon Tsi FWD
6 bolt swap COMPLETE!
ACT flywheel, ACT 2600, Joe P MBC, Autometer boost guage, Buschur DP, Buschur high flow cat, prothane motor mounts, BM tranny lsd insert, K&N,balance shafts eliminated, EGR blocked, free mods, and sweet ass 16g @ 18psi.

Bondo alone will sink in and crack. You need to weld sheet metal to shave the antenna hole, and then bondo over that....

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

anyone know where to get the s2000 antenna?

Or, instead of no radio, you could try this hidden antenna...

http://www.dakotadigital.com/Detail.cfm?Category=117&PartNumber=ANT-1000

EDFDC OWNZ

Will Werk for Mods

1995 RS

Current Mods:
Cracked Front Bumper
K&N Intake
Flowmaster Muffler
Platinum +4 Plugs
MSD SuperConductor Wires
and one heavy Right Foot!!!!

**Badgers??? We don't need no stinkin' badgers!!!**

**No Shirt, No Shoes, No Dice!**

**************
Fucking Kangaroos.
**************

i agree, no bondo because thats just a temporary fix, you need to have a shop do metal work.

1997 Eclipse GS
AEM CAI
Apex'i N1 Catback
Greddy Header
5% window tint
Front-Rear-Lower Rear STB's
Yellow Painted Calipers
1st gen altezzas with original painted center piece
Soon-Tokico Illum's or Blues

>Or, instead of no radio, you could try this hidden
>antenna...
>
>http://www.dakotadigital.com/Detail.cfm?Category=117&PartNumber=ANT-1000
>

Or we could READ the post where he says he "doesn't have the hookup for the anteanna in the first place".....
:-P

Mack
'97 GS, F/R Strut Bars, K&N Drop-in w/Drilled airbox mod, Kenwood 716S HU + 10Disc w/Infinity Reference 6x9" (R) 5 1/4" (F), Door chime mod, Power Antenna mod, scrape-the-front-bumper-cover-too-much mod

Mack
'97 GS
-Flowmaster 40 Deltaflow w/3" tip
-Autometer Bezel pod w/Autometer Phantom Oil Pressure & Voltmeter
-F/R Strut Bars
-K&N Drop-in w/Drilled airbox
-Kenwood 716S HU + 10Disc w/Infinity Reference 6x9" (R) 5 1/4" (F)
-Door chime mod, Power

since you can reach up in there from the back and touch that whole area couldn't you fiberglass it from the bottom with a few layers and then use bondo to contour the top? I would much rather attempt this fix myself than have to pay a shop to do metal work. If it doesn't work when I try a couple of times, then I would give up and pay.

>since you can reach up in there from the back and touch that
>whole area couldn't you fiberglass it from the bottom with a
>few layers and then use bondo to contour the top? I would
>much rather attempt this fix myself than have to pay a shop
>to do metal work. If it doesn't work when I try a couple of
>times, then I would give up and pay.

That will still crack over time. The only real way to do this is to have metal welded. You'd have to repaint that whole rear quarter panel area anyways, so you might as well pay a shop to weld some metal.

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

>Or we could READ the post where he says he "doesn't have the
>hookup for the anteanna in the first place".....
>:-P
>



My bad.
I posted that also for anyone else, like myself, who was interested in shaving thier antenna.

EDFDC OWNZ

Will Werk for Mods

1995 RS

Current Mods:
Cracked Front Bumper
K&N Intake
Flowmaster Muffler
Platinum +4 Plugs
MSD SuperConductor Wires
and one heavy Right Foot!!!!

**Badgers??? We don't need no stinkin' badgers!!!**

**No Shirt, No Shoes, No Dice!**

**************
Fucking Kangaroos.
**************

I welding sheet metal to the hole when I shaved mine. that's the best way to go. By the way, that is a bad a$$ conversion on that civic!

18 focal g7's
custom exhaust
weapon r coilovers
stage 1 clutchmasters
shaved stuff:
antennae
rear wiper and squirter
spoiler
reverse lights

oh yeah...it's a 99 gs

well actually to clarify Its ntot thst i dont have the antenaa hookup its just that my antenna doesnt have the cable

sorry for the crappy typing Lesson of the day- when cutting holes in your center console for a switch with and exacto knife, dont slice your other thumb

-EnDeR

>I welding sheet metal to the hole when I shaved mine.
>that's the best way to go. By the way, that is a bad a$$
>conversion on that civic!

haha will u buy it?

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

how many miles, yr? engine? problems? etc? i have a friend looking for a civic

--- My 2gnt WIKI contribution ---> http://www.jamlez.com/2gnt

97 Eclipse Spyder

95 Civic EX with about 130k miles.
Engine was replaced 2 years ago. Clutch recently replaced.
No major problems that I know of.

Here's some info:
S2000 tailight conversion
Shaved door handles, antenna holes, wing, side moldings
Racinghart C2 3-piece 17" rims
House of Kolour Kandy Burple paint
Custom buddy club rear (that rear was never made for 92-95 civics)
M3 side skirts
M3 mirrors
and some other stuff..


Only major prob is:
Front bumper is cracked so that needs to be fixed along with the passenger side fender which has a small hole drilled in it.

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

when I shaved my antenna i used fiberglass and that was over a yr ago and it never sank or cracked...... you have to relocated your antenna cable cause other wise your reception on your radio will suck......

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--

Yeah I guess you could get lucky and it won't crack, but it's just not the right way to do it professionaly to be honest. As others have said, welding metal is the only real proper way. It's kind of like cutting springs versus getting lowering springs. It might work for some people, but it's not recommended generally.

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

Ha. I wish I had nine grand...then I definately would!

18 focal g7's
custom exhaust
weapon r coilovers
stage 1 clutchmasters
shaved stuff:
antennae
rear wiper and squirter
spoiler
reverse lights

oh yeah...it's a 99 gs