I bought an autometer gauge bezel (the one that puts two gauges around the instrument cluster) and can not get a Sport Comp series gauge to fit correctly. The gauge is an oil pressure gauge and the light bulb holder that plugs into the back of the gauge sticks out too much and I have to tilt the gauge sideways to get it to fit correctly in the bezel. The light bulb holder hits the clear instrument cluster cover when I try to slide the gauge in place. My other gauge is an A/F and it fits fine. Now my oil pressure gauge is tilted / rotated 45 degrees to the right.

Is there a shorter light bulb holder I can get? Is there another way around this?

-Jared
96 GS
Melbourne, FL

Iceman CAI | RS*R Cat-Back | AFX Pully | Milled Head 10:1 CR | MP 60mm TB

dremel out a spot in the clear plastic, thats about all I can think of

ummmm, i didn't have that problem. have you tried cuting the metal threaded rods off yet. I did that to mine and they fit fine. i had egt and oil pressure in there

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

>ummmm, i didn't have that problem. have you tried cuting
>the metal threaded rods off yet. I did that to mine and
>they fit fine. i had egt and oil pressure in there

That's exactly what I did. The bulb socket isn't long enought to obstuct, it's those long metal rods, you can bend them, but be careful no to break the gauge. Your best bet is to cut them slightly if you can, an inch is fine. Later.

You can see my oil on the left here.

weasle745: and then to top it off, im not even an attractive guy. I look like Millhouse from the Simpsons, cant put on weight if my life depended on it, etc

Yeah, same here....just cut off the metal threaded rods on the guages.

http://www.cardomain.com/ride/3130861

I have already cut down the long brass screws to the same length as the screws where the contacts are. I can cut them all down a little more..... I will try that this weekend.

Also I do not like the color of the bulb or the covers that come with the gauges. Do they make a replacement bulb that is more amber in color?

Thanks for the tip.... I like those cobalt gauges.

-Jared
96 GS
Melbourne, FL

Iceman CAI | RS*R Cat-Back | AFX Pully | Milled Head 10:1 CR | MP 60mm TB

Yeah they sell different condom colors for the lights. I just went to a local race shop and pick up some blue ones for mine,

Jay



--- Profile ---
http://www.dsmtuners.com/forums/member.php?action=getinfo&userid=5614

--- Pics ---
http://www.dsmtuners.com/gallery/showgallery.php?cat=500&ppuser=5614&thumb=1

--- Pics ---
https://420a.shutterfly.com/

Does anyone else have a fit/finish problem with the bezel?
Mine seems to have a bit of a gap on the sides that's pretty obvious....does anyone else have this?

And yeah, trim the screw (only the one hitting the gauges is nessicary) all the way down, and it will fit perfectly....i just installed my gauges last weekend :-D


Mack
'97 GS, F/R Strut Bars, K&N Drop-in w/Drilled airbox mod, Kenwood 716S HU + 10Disc w/Infinity Reference 6x9" (R) 5 1/4" (F), Door chime mod, Power Antenna mod, scrape-the-front-bumper-cover-too-much mod

Mack
'97 GS
-Flowmaster 40 Deltaflow w/3" tip
-Autometer Bezel pod w/Autometer Phantom Oil Pressure & Voltmeter
-F/R Strut Bars
-K&N Drop-in w/Drilled airbox
-Kenwood 716S HU + 10Disc w/Infinity Reference 6x9" (R) 5 1/4" (F)
-Door chime mod, Power