I got a rip on both sides of my stock bumper where it meets the fender. is there a way to repair this? epoxy? thanks

alvin


Alvin

96 RST

Star Stage I turbo kit /Starion I/C w/ 2" chrome piping / GReddy Type-S BOV / Missing Link / Custom APEXi- GReddy 2.5" exhaust / 55mm ARD TB/ Nology wires / APEXi EL mech boost gauge / Autometer A/F gauge / Southland Dual Friction clutch / B&M short shifter / Energy Suspension shifter bushings / 16" GSX Rims / Front/ Rear camberkits / Eibach Prokits / Tokico Blues/ Front Upper, Rear Lower strut bars / Rear GST sway bar/ GSX Dual Piston Calipers, X-drilled/ slotted rotors

Alvin

http://www.cardomain.com/id/96rst

Fiberglass most likely. Mines has been repaired with fiberglass in the top corners before. And where I got hit.

anything but bondo. I have seen them repaired with bondo. EWWWWWWWW. Maybe the shop that fixed it sucked, but it was horrible. Would have looked better fixed with painted over duct tape imo.

I think you have to use a special material to melt back into the urethane. Fiberglass and bondo do not adhere well to urethane so usually most shops won't even bother fixing urethane...

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

call around to alot of body shops, i was askin my buddy about cutting up my front stock bumper to customize it and he told me about a glass/bondo like stuff that will actually flex. he owns a body shop btw

was this the front bumper i was going to buy from you?

--- My 2gnt WIKI contribution ---> http://www.jamlez.com/2gnt

97 Eclipse Spyder

Marcus I'm sorry but I have to disagree.

Most body shops DO fix urethane bumpers, and it's ALWAYS a fiberglass patch or kit. The body shop that painted my bumper had to fix the gash torn into mine from when that mullethead backed into me. This is the same shop that rides from Team Koncept come out of. (http://teamkoncept.com) Now I have a paint crack there, but still they fixed the gash, and you can't tell. My stocker bumper was repaired with glass before I even bought it, and I never knew it until i "reopened" the crack after hitting a armadillo.

Well from my experiences, at least in socal, they don't usually repair urethane bumpers. Even before I got into body work, my insurance company said they would just have to buy me a new front urethane bumper. I know that for really small cuts you can repair it, but for a larger gash, I don't know how durable the repair would be. If you say they do it, then I'm sure it's possible. I just have always been told that once you damage urethane, they usually will buy a new one.

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

shiT does that mean i'm screwed? i have a huge ass paint "chip" on my rear.

95 GST | So-Cal

No, your chip is okay, you just have to repaint it. It's just the paint. The urethane on your bumper is not damaged at all from what I saw last time. Don't worry. Plus, I guess there are shops around that will fix it if it was torn...

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

i live in Oregon and work at a body shop.(99' ASA shop of the year) One way to go is buy a factory style, but aftermarket bumper.I bought my 97-99 style for $170.if you don't have the money to do that, we have this "fusor" stuff that works great.Look into it.

Green 95 GS 5-speed
Engine--PCP cold air intake,Greddy header,Accel 8mm wires,OBX custom exhuast.

Suspension/Brakes--Sprint 2' springs, KYB Gr2's, EBC Red Stuff pads,17" Konig Traffiks (silver), 215/45/17 Yokohama AVS ES100's, 15 dollar camber kit.