Well the past 2 days Ive been working on a custom S-AFC install. Here it how it went.



Here are the basic materials I used. I traced the vent trim onto a piece of thin lamenant with a pencil, and then used a dremel to round all my edges and fit it onto the stock trim. It acts as a frame for the S-AFC. As you can see I also used the dremel to clear out some space in the stock trim by ridding it of the vents entirely, making an open space for the S-AFC.



Here is a close up of the frame.



Here is how the frame sits on the vent trim.



Above in this pic, I'm fitting the S-AFC in my rectangle, trimming and fitting over and over till it's perfect.



I used a dremel to round all of my edges nicely, then sanded to make them clean.



Here it is after a few coats of paint, and dremeling out the button hold and fitting the buttons.



Heres a close up



Here is the finished product, not too bad eh?



And here it is all ready to go

Let me know what ya think

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

That is awesome man, great work!

Jaeson
'96 Eclipse RS

Looks:
APC Euro clear bumper lens
front grill
chrome front emblem
Razo C/F pedals

Performance:
Perma-Cool oil cooler
custom airbox

On The Way:
Kaminari GTR wing off Shauns NER Eclipse
Hurricane_GS front & rear lower tie bars
95-96 side skirts

Smiley face 4 life!

Jaeson
'96 Eclipse RS

Nice Work! Do you miss the center vents though? (I'm thinking about doing the same thing, but it's hot down here in Miami)

http://www.snappydsl.net/ctoledo/

damn son, that is sweet! you have one of the nicest cars on the board. That install is nice. I don't know if i could do away with the air vents though, it tends to get kinda hot here.

~Sean

99 GSX
97 RS--SOLD

hot damn that looks nice

AFX/UDP,AEM,AF/X 55mm TB,50 shot of NOS,Glenn's short shifter,17" tantrum,prokit KYB AGX,JL stealthbox sony headunit,audiobahn amp,M3 style mirrors,Blue leds,yellow fogs,reverse ind,w

HOT!

-Joe
___________________________________
White 98 Eclipse GS MT
Star Stage 2
*Stolen - 10/24/03*

I using some small ducting and Im rerouting the vents to holes I will create in the kickpanels.

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

> I using some small ducting and Im rerouting the vents to
>holes I will create in the kickpanels.

mmm super custom, nice work, Im planning on the same when I get some time, but Im gonna run the vents, straight up on the top of the dash, so it bounces off the windshield.

1998 dodge avenger 4 cyl AT
Mods are:
Not enough