my interior has a rough feeling after the paint dried. i don't know whether its just the paint, or particles settling on it while it dried. i applied several coats and its definitely dry, but i gotta get it to feel "stock", or smooth. do i sand it off, and if i do, what grit do i use? if not sanding, what do i do to get rid of this feeling?

dgonzalez52@yahoo.com

Use like at least 800 grit sandpaper

Evan
Looking

I found out a nice trick. Sand it pretty good, where it smooths it some. Then primer, wet sand, primer, wet sand until smooth. Then paint it some, small coats to keep it smooth. Any runs, just wait it out, stop, when it dries, wet sand it. Clear coat it like u wanna drown it. Any runs, just wet sand and then go light with clear after it dries. The last part I did this with looks just like the outside paint.

Also you can just wipe down the peice in between coats with a tack cloth to pick up any unwanted particles.

--------------------


- 05 Subaru STi
- 97 eclipse gs (289whp w/ 276tq)

don't sweat it, i had the same problem, mines still rough, ive been lazy and havent sanded it down and painted again yet. Its a pain to mask off your windshield and all that again heh, I gotta find some time to do it. Anyway, you'll be alright bro, just take your time and relax.


96ESi Mods
apex' dunk exhaust
injen short ram
magnecore 8.5mm wires
front/rear strut tower bars
custom painted interior

I contributed to the Wiki.

not sweating it, but i want to get that smooth feeling back. i'll try wipe it down with the tack cloth for future reference, but for now, sand it with 800 grit? i don't wanna clear anything, cuz i don't want it shiny. i want it to look stock, all black with some silver.

dgonzalez52@yahoo.com

Yes, use at least 800 grit and sand between all coats

Evan
Looking

what kind of paint did everyone use? vinyl? and pretty much the only thing you can do to paint the interior is taping off everything?


shaun

sdl32

RT .717
60' 2.38
1/8 10.29
MPH 69.9
1/4 15.9
MPH 86.11

nah playa... i didn't want to do it like that, so i took the door panels out and i bought a dash at a junk yard (no downtime). some guys here have also taken there dash out and painted it too. oh, and yes, vinyl spray paint, platikote, duplicolor, or (the best stuff and most expensive) sem. good luck!

dgonzalez52@yahoo.com

9D9, I just started redoing my interior and have been following your instructions, cept I'm using a dremel tool and making it 100% smooth, got the a/c vent peice done and it looks badass! thanks bro, btw, I'm using hehe rustoleum gloss aluminum and clearin that, turned out great, btw, sanding's a biatch!

1993 Eagle Talon Tsi FWD
6 bolt swap COMPLETE!
ACT flywheel, ACT 2600, Joe P MBC, Autometer boost guage, Buschur DP, Buschur high flow cat, prothane motor mounts, BM tranny lsd insert, K&N,balance shafts eliminated, EGR blocked, free mods, and sweet ass 16g @ 18psi.

damn agression, nice interior. i like the white and black contrast, it looks really good.

New Car:
2004 350z base, Nismo CAI, pioneer avic-n1 (dvd, cd, navi)



Old Car:
1998 GS with hrc stage 2, HID 6000k conversion kit, AEM UEGO wideband, sfmu, ml, prokits, Greddy warning gauges: egt, boost gauge, and oil pressure, apexi tt, haydans tranny cooler, costum dp, groundwires, dynotune fp gauge. gst muff, turbo spoiler
Boostin since Aug 03.

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!

actually, i think that's silver bro... but you're right, damn nice contrast.

dgonzalez52@yahoo.com

what grit did you guys use to smoothen out the plastic pieces?

dgonzalez52@yahoo.com