today I was pulling out of a parking lot, put it in first, wasn't applying any pressure on the shifter and boom, thing just pops off of the pivot point, anyone ever have that problem? or do I need to just get a titanium shifter ?

1993 Eagle Talon Tsi FWD
6 bolt swap COMPLETE!
ACT flywheel, ACT 2600, Joe P MBC, Autometer boost guage, Buschur DP, Buschur high flow cat, prothane motor mounts, BM tranny lsd insert, K&N,balance shafts eliminated, EGR blocked, free mods, and sweet ass 16g @ 18psi.

sorry but excuse me for a minute... haha. Sorry. How man? Well get a new one I guess. I've NEVER heard of that.

97 RS- Runs, but never driven
2000 Subaru Outback- Daily Driver

uuummm...remind me never to piss you off

http://www.snappydsl.net/ctoledo/

was it stock?? if you shortened it i could understand... but stock?!? man you must be stacked! haha

well, I'm 6'0 250 lbs, but damn mitsubishi! make stronger steel, and so my baby is sitting over there all lonely at the dealership getting her new shifter, gonna have them put on my new power steering pulley while they're at it, btw, Imma try and take pics, it's funny as hell

1993 Eagle Talon Tsi FWD
6 bolt swap COMPLETE!
ACT flywheel, ACT 2600, Joe P MBC, Autometer boost guage, Buschur DP, Buschur high flow cat, prothane motor mounts, BM tranny lsd insert, K&N,balance shafts eliminated, EGR blocked, free mods, and sweet ass 16g @ 18psi.

What's the deal with you're power steering pulley? Mine is rattling a little bit right now and it's driving me nuts, the pulley's loose it looks like. What the hell do I need to tighten the thing up? I tried the bolt going through the center of the pulley but it's tight already.


Coo'
alex_ries@hotmail.com

Coo'
alex_ries@hotmail.com

FUnny, this just happened to my friend in his ford probe gt.

yea, they said there was a recall on the 99 GS Eclipses saying the power steering pulley was inadequate, so they'll replace it for free, as for the shifter I'm starting to get pissed, theyre now telling me, oh no, it's not under warranty, you have to pay us 126 bucks, SCREW that, what all comes in those OBX short shifter kits? does it replace the entire housing or what?

1993 Eagle Talon Tsi FWD
6 bolt swap COMPLETE!
ACT flywheel, ACT 2600, Joe P MBC, Autometer boost guage, Buschur DP, Buschur high flow cat, prothane motor mounts, BM tranny lsd insert, K&N,balance shafts eliminated, EGR blocked, free mods, and sweet ass 16g @ 18psi.

back to the original question. i brok emy pivot point too. it's about $27 at the dealershit. it's mad easy to install so don't have them do it. the bolt that holds the lever to the pivot point broke. happend to me too. if you need a quick fix you can pull the bolt out and put it in backwards and tighten it back down.

good luck

http://www.ocaddict.com

thanks beefgg for the sig

tiight, but does the B@M and the OBX ss's come with their own bolts? thanks man

1993 Eagle Talon Tsi FWD
6 bolt swap COMPLETE!
ACT flywheel, ACT 2600, Joe P MBC, Autometer boost guage, Buschur DP, Buschur high flow cat, prothane motor mounts, BM tranny lsd insert, K&N,balance shafts eliminated, EGR blocked, free mods, and sweet ass 16g @ 18psi.

have you checked a junk yard yet???


'95 Eclipse RS
INTERIOR
-Sony CDXM 750
-2 JL Audio 12w0 subs
-Premiere Amp
-CompuStar 2WAS Alarm with Remote Start and Pager
EXTERIOR
-Enkei 15" wheels (came with the car)
-2nd Generation Altezza Tails
-Clear Bumper Lenses
-APC Speed Glo Mirrors (with turn signals)
-Red LED Washer Nozzles
PERFORMANCE
-K&N Filter

nowp, kinda want an OBX ss, but cant find one anywhere on the net for sale, anyone know of where I can find it?

1993 Eagle Talon Tsi FWD
6 bolt swap COMPLETE!
ACT flywheel, ACT 2600, Joe P MBC, Autometer boost guage, Buschur DP, Buschur high flow cat, prothane motor mounts, BM tranny lsd insert, K&N,balance shafts eliminated, EGR blocked, free mods, and sweet ass 16g @ 18psi.

short shifters come with just the lever unless you get the 300 dollar neuspeed one that changes the pivot point. the neuspeed one is like a whole new assembly

http://www.ocaddict.com

thanks beefgg for the sig

MAN I THOGUHT I WAS THE ONLY ONE!!!!!!!!!!........I did that about 2 weeks ago......i snapped it off where it was welded..the rod that the shifter slides onto cracked off where it was welded to the assembly....and yes the OBX replaced what i broke it comes with e actaul shift stick and the other full piece it slides onto....but THERE IS A HUGE backorder....unless u go through ebay I guess....but i got store credit so i gotta wait almost a month...right now I'm scouting out junkyards and have it DSM rigged for right now.....but yeah I ripped it out goin from first to second AND i wasnt even racing....but hey impressed my two freinds...lol....never even heard of it happening to anyone else til iread thid post..LOL

95MTX Black GS Mods:
Accel Wires
Denso Iridium plugs
Overbored throttle body
AEM Cold Air
Unorthodox UDP
Custom 2.35 catback w/ Arospeed Bomb Muffler
Symbroski Shifter Kit
OBX Short Shifter w/JDM Spirit Racing Drift shift knob
Clutch Restrictor

Stop getting ripped off. Go to your local junkyard. Remove shifter from eclipse wreck. (cant be more than $25) Take shifter to a local muffler shop. "Hey do me a favor rite quick, I'll slip you $10-$15 if you cut this in half for me and weld it back" Bam, custom short shifter. Dood you will never see/feel/know the difference of a OBX or a B&M short shifter or a stock modded shifter ever. End of story. Its all hidden under your colored shift boot that u can buy from a member on 2gnt, hahaha (damn I made like 3 promos there)

That's my advice.

hey Niclipse, what rims do you have on your car!? those look tight

hey mike not for nothing but if you tried to give someone 10-15 bucks to cut and weld a shifter up here in NYC they would laugh at you. They'll charge you that just to park your car at there place for that much. Remember ny'ers invented the handout payoff.................
lol

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--

time to move imo

So Mike, your saying theres not much of a difference between a cut and welded stock shifter or an aftermarket short shifter? Just want to be clear before I drop 100+ for an aftermarket shifter



Jaeson
'96 Eclipse RS

Looks:
Clear side markers
front grill
chrome front emblem
Razo C/F pedals

Performance:
Perma-Cool oil cooler
custom airbox

On The Way:
Hurricane_GS front & rear lower tie bars
95-96 side skirts

Smiley face 4 life!

Jaeson
'96 Eclipse RS

see if anyone else will back up my statement, but ya that's my opinion.... u will never know the difference man, i promise... it's a shortened piece of metal! ur paying for name brands i think in a case like this... its all underneath the console, u dont see it.

yea, I finally got my car back from having the steering pulleys and bearings replaced, also slipped me a new belt, I Still dont think it drives the same, but oh well, me and my friend said fuggit and cut the shifter in half, rewelded, and rewelded the bolt back on to the pivot assembly, shifts HELLA good! I'm still going to get the OBX, ONLY reason is I dont trust welds, just an old superstition, but I like my stuff billet, but I've driven both and like Mike said, there's barely any difference, there is a minor difference in that the OBX has a little more resistance, but that's up to the driver's prerogative anyway

1993 Eagle Talon Tsi FWD
6 bolt swap COMPLETE!
ACT flywheel, ACT 2600, Joe P MBC, Autometer boost guage, Buschur DP, Buschur high flow cat, prothane motor mounts, BM tranny lsd insert, K&N,balance shafts eliminated, EGR blocked, free mods, and sweet ass 16g @ 18psi.

>today I was pulling out of a parking lot, put it in first,
>wasn't applying any pressure on the shifter and boom, thing
>just pops off of the pivot point, anyone ever have that
>problem? or do I need to just get a titanium shifter ?

Is it the shifter that broke or the shaft it pivots on? Someone here had the shaft break off once. Had to buy a new one at like $40 I think.

**********************************

"Don't worry, I'm fluent in weirdo."
Hurricane_GS
eclipse@gcni.net
AKA: Glenn H. Shelton III
Saint Cloud, FL
1997 Eclipse GS Non-Turbo
http://eclipse.greenliquid.com
---------------------
Front Upper Strut Bar
Rear Upper Strut Bar
Custom Lower Front Tie Bar
Custom Lower Rear Tie Bar
AEM Cold Air Intake
Pace Setter Muffler
Custom Short Shifter (Only $40 - Email me for info! eclipse@gcni.net)
Smoke Tinted Clear Tail Lights
Custom Illuminated Center Tail
Tokico Blues
Eibach Pro Kit
Neuspeed Front Strut Bar

On the way:
Indiglo Needles

**********************************

Hurricane_GS
AKA: Glenn H. Shelton III
Saint Cloud, FL
1997 Eclipse GS Non-Turbo
eclipse@greenliquid.com
http://www.hurricanegs.com

well, shifter was bent, not the normal bend, one that I accidentally put on...... , and pivot was cracked off, but we fixed those prollems

1993 Eagle Talon Tsi FWD
6 bolt swap COMPLETE!
ACT flywheel, ACT 2600, Joe P MBC, Autometer boost guage, Buschur DP, Buschur high flow cat, prothane motor mounts, BM tranny lsd insert, K&N,balance shafts eliminated, EGR blocked, free mods, and sweet ass 16g @ 18psi.

I broke my shifter too. My story is different though. I had just gotten a wisdom tooth removed(and I was awake through the whole thing too) I was driving home in mass pain and I was power shifing to hell and back, I got home and the shifter assembly fell in the console. I had to jerry rig the thing with a bolt untill I got my shortshifter.

- No Purchase Neccesary. Details Inside.