Hey I tired changing the glove box light to an LED. I guess the current or the voltage is different and the LED wouldn't work on it. Do you guess have any idea what I have to do to make the LED work with the glove box light wires.

thanks

instead of using led's, you can actually just color the bulb with a blue sharpie marker. i've had mine done for like 5 months now, and its still a nice blue color. it may sound ghetto, but it looks sweet. if you decide to go that route, make sure you use a permanent marker and let it dry completely or else it will burn off.

i ended up buying a set of blue bulbs and just put one in the glove box light

Same here, I just bought sum small blue bulbs, and I also changed the bulbs to blue where your feet go. Looks tight at night.


1999 Mitsubishi Eclipse GS 10th Anniversary Edition
- Weapon R1 Atom Bomb Exhaust

http://www.webphotos.com/list_photos.asp?mi=3&smi=1&a=55649

2002 Subaru Impreza WRX

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

I changed the bulbs out. I think I have a purple one in now cuz it was bright.

sorry to bring up this post but I just wanted to know what size bulb do we use for the glove box light?

194

hawaii boy

hell, my glove box light doesnt even work..... ehhh, i dont need it

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

just get a 194 LED.. they just pop right in like your regular bulb if you're using a regular LED right now and it isn't working make sure you used a resitor to adjsut the voltage and make sure you have the polarity correct. LED's will only work one way whereas incandescant bulbs will work either way. the longer lead wire is the positive.

-marc

='95 RS 5spd Red=
Matrix TypeX CAI
A'pexi Turbo N1
Nakayama GT5 17's
Ractive STB
GSX Calipers
AEM 12.5" X-Drilled/Slotted Rotors

255 is fricken short