I just got these light's the day before yesterday, and I washed the car last night, and when I was rinsing, I noticed that water was just dumping into the centerpiece cause there is a open gap between the space going toward the keyhole (although the stock centerpiece is the same way, this is a bad design flaw in my opinion for $230). Anyway, does everyone have this problem with new tailamp's, and is this the reason why most people get the original centerpiece painted the car's color so they don't have to use the tailamp kit's centerpiece cause of leak's. Does anyone know a fix for this. The centerpiece apparently has drain's at the bottom of it cause the water just came right out, but water dropplet's were trapped inside that I just have to wait to dry on their own.

Current Mods:
- Weapon-R Intake w/Hyper Foam Filter (Red)
- Weapon-R Breather Filter (Red)
- Tenzo-R Muffler
- Extreme Motorsports Strut
Tower bar
- Symborski Shifter Bushing Kit
- Stock Shortened Shifter
- Momo "King"-style Aluminum Shifter Knob

Heres my opinion on altezzas:

1st - There played out big time
2nd - I had bought APC altezzas and went through 3 pairs, all they did was leak, eventually got my money back
3rd - APC signed a contract with wal-mart which means APC rushes to make there product quickly, this means cheaply made products.
4th - Just about every honda in the world has them.
5th - Paint your stock middle piece the color of your car and put the stock tails back on, it looks bad ass.
6th - If you buy something for $230, they shouldnt leak, thats like buying new tires but there bald

Those are just my views, it's your car do what you want.

1998 Eclipse GS

AEM Intake
Freedom designs strut bar
Eibach pro kit
Greddy cat back exhaust
High flow cat
APC indiglo gauges
Indiglo hvac gauges
Stock tails w/ painted center
GTS Solarwing painted
APC clear side markers
PIAA superwhite lights

Stereo:
Kenwood cd player
kenwood excelon 6.5" components in doors and rear panels
diamond audio tweeters in dash
Dual 12W3 JL Audio H.O. box
kenwood ps 300 amp for subs
eclipse 4 channel amp for mids and highs
2 .5 farat monster caps and monster cable wiring

x-mas gifts that aint on yet:
Mesh grill
carbon fiber euro dash
18" katana concept 7's
Greddy header

future mods:
chrome engine kit

you could use silicon to plug those holes

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

I'll probably go ahead and get both the original center piece painted, and cut a small piece of a silicon hose to run from the lock to the outside of the hole just slightly enough to not be seen easily to block it from water. That way I can just switch up the look of the rear of the car by changing the middle panel's when I want to. Thank's for the help guys.

Current Mods:
- Weapon-R Intake w/Hyper Foam Filter (Red)
- Weapon-R Breather Filter (Red)
- Tenzo-R Muffler
- Extreme Motorsports Strut
Tower bar
- Symborski Shifter Bushing Kit
- Stock Shortened Shifter
- Momo "King"-style Aluminum Shifter Knob

take them off ans sale them if you can. I got vtech covers. Altezzas leak and will fade to yellow over time. They are the biggest rip off. IMO, something so expensive should not turn to shit like the do.

if you seal them you won't have any problems, what's the big deal with having to spend two dollars and 10 mintues on sealent?
turbo kits cost 2000+ and they usually aren't "plug and play"

jZa
IHS # fo-six-fo-six

"real men don't ride stick"

I took an o ring from home depot and used a water resistant glue to seal the hole.. I think everything from APC leaks like that....

how is quality of altezza's versus clear lights?

they are all made by the same people, but you won't see any water inside the clear ones, i don't think

jZa
IHS # fo-six-fo-six

"real men don't ride stick"

Thanks for all you guy's suggestions. I got an O-ring and some glue.

Current Mods:
- Weapon-R Intake w/Hyper Foam Filter (Red)
- Weapon-R Breather Filter (Red)
- Tenzo-R Muffler
- Extreme Motorsports Strut
Tower bar
- Symborski Shifter Bushing Kit
- Stock Shortened Shifter
- Momo "King"-style Aluminum Shifter Knob

I had purchased the 2 piece altezza set from www.altezzalighting.com for my GS, and was fairly happy with the quality. I knew the center pieces leaked so I just didn't even go there. After trading in for GSX I have just left in the stock tail lights.

98 GSX Power

you can seal them. My altezzas faded tho, on the outside, and the red circular lenses popped out and were close to just rolling around in there. fuck that. They suck really bad besides just leaking.

Mines almost like rolling around n there tooo!! i hate that shit!

~*~*May the fleas of a thousand camels infest the crotch of the person who fucks up your day and may their arms be too short to scratch*~*~