do i really need hood pins for my carbon fiber hood? some have them and some don't

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

You MUST have hood pins. We don't let a car leave unless they have them. Your hood WILL eventually fly up. The fiberglass latch piece won't withstand the pressure and will eventually break. Way too many hoods fly up and crack the windshield or worse. Get hood pins, or hood locks to prevent anyone from opening your hood. It looks good imo too..

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

i have heard a few nasty stories about carbon fiber hoods with no hood pins. Don't risk it.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

Ditto I have heard some bad stories also. I wouldnt risk it and not run without them.

97 Eclipse GS

cool.....do does anyone have any pics of where the pins are mounted? how hard is the instalation? it scares me to drill into a 400 dollar piece of fiberglass

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

hell if i can do it...........

was it tough to do?

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

i just think it looks cool too. Anyone done it on non carbon hood?


-Brian

I guess what u do is, find an equally spaced mounting place for them, screw them into the holes. Put some grease on the tip, let the hood touch the pins, lift up, make a nice starting point for the bit with a knife or the drill. If u are going through a frame, you will have to do it again. I think the frame near the radiator is our mounting point for pins. Right?

First drill holes in the frame where you want the hood pins, and attach them. Then you can slad a dab of bondo on the underside of the cf hood in the area where you think the hood pin will go through the hood. Now gently let the hood down. Since your hood pins are already drilled into the frame, it will make a mark in the bondo on the underside of the hood. Now you know where to drill for your hood pins...drill from under at first, then at the end, make a clean hole from above.

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

ok the lil myth bout CF hoods.. im no expert..

but check this.. loook at my pic.. no pins.. had the hoood 1.5 years now.. now it has flown up twice on me.. but because i did not latch it down.. first time was after a show and i just forgot cuz i layed it down so people could ohh and aahhh... second was not tolong ago.. was working on it.. and ithought i closed it..

Now if i would of HAD pins i would off had to close it.. so i will settle that arguement right now..

i just think too many people are telling you that you HAVE to have them... I would say its nice to have.but u dontt NEEEDDD THEMM so bad..

i should of got some.. but under the hood theres some lil rubber things u can take them out and mount them in there..

go peep www.dsmtalk.com look for paradox racing.. i think hes on this site too... hes got a red with CF hood eclipse.. hes got a how to on it.. dont worry about drilling through the CF.. it will be fine..

i also have a fiberimages hood.. strongest out there.. first time it flew up.. 2 tiny scratches on both sides of the hood.. wasnt huge at all.. couldnt reallly see..

now this last time .. it kinda messed it up big time.. 2 more lil scratches.. and it split the hood and dented it a lil on top.. not super noticeable but bad... so its time fora new hood.. it dont loook that bad.. but to me itsnot perfect so u know

but i didnt jacked up windshield.. it actually never hit it.. it just flew perpendicular to the car and stopped.. its scary having a black hood fly up on ya..


my boy had a fiberglass perdator hood that flew up and smased up his windshield.. but the hood was fine. i dont get it.. well a tiny mark on it..

I love dino and 2gnt. ####ers (my word) bliz stole it but i let him borrow it

yeah you also don't need a condom to f@#k a 2 dollah hoe but would you wanna take the chance?

Looks like this guy feels the same way about not takin chances....

_________________
James

Shit mang, that guy triple bagged his junk for that 2 dolla hoe!
-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

well I don't have pins on mine nor does wyatt on his and I have hit speeds of 120+ and so has wyatt. and neither of us have had any issues. just make sure ur hood is closed and u shouldn't have to worry.... of course it could make a diff depending on who makes the hood u are using.

mine is Fiber Images

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

where could i order etc a fiberimages carbon fiber hood? also how much was it ?
thanks
Michael 99gs-hrc stage 2

Michael
99gs hrc stage 5000 SOLD...
2004 Honda Accord V6 (240 hp)stock
what other car should i buy?? hmmm
Car info & pictures at http://www.cardomain.com/memberpage/520269

well you can get it from fiberimages themselves..


www.fiberimages.com

i got mine 1.5 years ago from www.imoto.com it was 525 shipped then

I love dino and 2gnt. ####ers (my word) bliz stole it but i let him borrow it

i have been quoted $400 for fiber images from a local shop and CARisma. And $350 for a VIS cf hood, $350 for Robocar hood, And $340 for a WCS hood.

Ian | SoCal | Former 2GNT owner |
2GNT mods & pics: www.go.to/dsmdomination |
email: icjeclipse@earthlink.net |

mine was 475 shipped off a group buy

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

Driving down the freeway today at about 80-85mph I see this guy in his 96-00 white Civic 2dr which I've seen a couple times, he's got a full Ground Designs Black Widow bodykit with the hood (BTW the scoops on HIS hood are sealed, no mesh, air CAN'T enter the engine bay, likely the reason for what happened), carbon tails, tight rims and what seems to be a dual Greddy EVO exhaust system (coulda been knock off muffs but looked good), tight car to say the least.

His hood:



Anyway, were cruising side by side when this shit in a pickup truck with a 20 foot camper is going 60mph in the 2nd to fast lane, so I go around him and lose the Civic, I'm lookin' all over and a couple seconds later the Civic guy's hauling over to the right side of the freeway (4 lanes from where he was, dense traffic), with his hood sticking straight up in the air, he couldn't see a shittin' thing. I know for a fact that he doens't use hood pins and just the stock latch. Scary man, can you imagine flying down the freeway at 90 and your hood shooting straight up into your friggin' face?!?!

I didn't read the previous posts and I'm sure people told you to get pins and whatnot I just thought I should share.
Coo'
alex_ries@hotmail.com

Coo'
alex_ries@hotmail.com

Joe had one without hood pins and up flew the hood. I want one and plan on running the latch and the hood pins.

"The fastest draw is when the sword never leaves the scabbard,
The strongest way to block, is never to provoke a blow,
And the cleanest cut is the one withheld."

Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold, Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

hmm i dont know what to say then.. id say pin just to be safe.. but i have driven 120 at times.. just down the highway.. 100 almost everyweekend going somewhere on the highway..and its been fine..

but i was also in a accident which kinda gave me the opp to get the cf hoood.. and we had to move the latch around some to make it close... and its a lil harder to open now. so maybe thats why mines so sturdy.. but i havent had a prob if it was latched down.

maybe it has to do with who makes the hood or what not.. some of them have the laser cut ones now..+

I love dino and 2gnt. ####ers (my word) bliz stole it but i let him borrow it