i will be back in school next month and not working full time so i will be making the shifter ring and plate shown in the picture below with or without the shift pattern plaque, your choice. these will be reasonably priced and i will make them (most of them) before i take any money. To many peoples on here gettin burned on "taking orders, send cash now" scams. If i sell all of them , great, if not o well!

I will also be attempting to do the dash peice seen in the picture as well. i made it once, i can do it again better and stronger!!!! i may make it with a plain face and you cut to fit, we'll have to see. lots or R&D for that one since peoples want different things, and im only one person. I may do some special requests if you want other things in/on there than what i have. you will have to let me know. these will be more expensive (obviously) and same thing as above, made before money taken. UNLESS you want a special deal, then SOME money is and will be good!!
i will keep you guys updated!
thanks for the interest!!!!!

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

Id be very interested in the dast piece, how much $$$$ are you thinkin for that piece,

TIA

Ryan

I am interested in both. Let me know when.
Thanks!
-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

I am interested in the shifter ring. How much are we talking???? Let me know!

Allan
2008 Magnetic Black 350z NISMO /1976 Austin Mini 1098 Special (export)

Member# 1980

yeah man, don't leave us hanging like this :p I am interested in both too.

I think the shift plate is nice, I'm interested.

i too like the shift plate..how much dude? i'm very interested.

Mark
invaznGST on AIM
95 GS-T 5 Speed

Currently on car:
-TurboXS Type-H RFL Bov
-VDO Boost gauge
-Blitz FATT Turbo Timer
-Injen Intake System
-K&N Air Filter
-Front Strut tower bar
-Altezza taillights
-Painted rear center piece
-Porsche 'Tu

If the price is right, I'll take one when the time comes.

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

i want one sooooo bad. i havent found one at all til now.

Mods & Pix Here:
http://geocities.com/theplastik/

I WANT!!!! I think ive told you id buy the dash pieces before about a year ago and I still want one really badly. I will take that and am interested in the shifter ring too. Pleas hook me up!!!

I'm in on the shift ring. Hell, with all the positive feedbacks you have, I'd even pay in advance (I have yet to be burned, but have also never ordered up front, so I can spare a little blind faith at this point). Keep us interested...

68.12.237.96:4251/teamchaos
Greg / w|sh / however you know me * Proud Member : Team Chaos Show Division

All the darkness in the world cannot extinguish the light of a single candle.

- St Francis Asisi

ill take a dash piece...



Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

Both of those parts are bad ass. I'd be willing to buy the dash piece and the shifter ring if the price is right.

Jason
'11 Ford Mustang GT/CS
'11 Ford Mustang V6 6-Speed (SOLD)
'04 Nissan 350z Touring (SOLD)
'95 Turbo Eclipse GS (SOLD and will be missed)
'90 Talon TSi AWD (SOLD)

Count me in as well for the dash piece. Let us know what you were thinking for a price with either a blank face or cut out for SAFC or a couple of gauges. Thanks,
chris b.

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

>Count me in as well for the dash piece. Let us know what you
>were thinking for a price with either a blank face or cut
>out for SAFC or a couple of gauges. Thanks,
>chris b.


fuck it, count me in to, and ill pay in advance also, via paypal.....

HRC SUPER 16G FOR SALE BRAND NEW,, 800 USD
Dwayne H
A.K.A D-low
"PAID THE COST TO BE THE BOSS"

Fully built motor,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!

PRICES PLEASE!!!!!!

Allan
2008 Magnetic Black 350z NISMO /1976 Austin Mini 1098 Special (export)

Member# 1980

Im definetly interested in the shift ring...looks cool!

User banned for scamming members on 2GNT, WIDSM, and CHITOWNDSM. This user and his brother Jason Ames have been involved with theft of parts from other DSM members. This individual is not trustworthy and should not be involved in any type of sale.

i like the dash doo hickey, im done for one, it looks purty....add horsepower? jk but yeah, im interested in a dash gauge holder

turbo8u: "jiggle jiggle then vroom vroom pshhhh"
-Mike Pruett
2gnt member# 976
MOPAR Stage 2
SRTForums.com member #37 (Yeah, I signed up when it first came out, and ended up getting one, cool huh?)
"The object of war is not to die for your country but to make the other bastard die for his."
- General George Patton (1885-1945)

Yea, some of us (not including me) might be a little sore in the asshole after the TB incident. Fuck it, who cares, i really want that for my AFC.



Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

niiiice... was hoping you would be making these for sale... im interested in both as well

^^what once was^^


^^what is now.. and permanently^^

I would like one of the shifter pieces too!!

Navy Recruiter
Lexington Park, MD

Yeah i'll take the shifter too.

96 gs-t
Boost,and air fuel gauge
Borla Exhaust and muffler
shitty 16" rims

not installed:
97-99 conversion
Sensie front
invader skirts
invader rear
double deck aluiminum wing
m-3 mirrors w/ led
Front strut bar
coilovers
reverse indiglo gauges
Kenwood excelon in dash tv/dvd
10 disc changer

wanted:
6 bolt motor
18" rims


Remdawgz@aol.com

96 gs-t
To much shit to list.


Remdawgz@aol.com

i'm down for a dash piece

Jason
---------------------
99 White GS
Tanabe Super Racing Medallion
Apex-I S-AFC, Springs
AF/X Underdrive Pulley
Fully tied suspension

I am interested in the shifter ring also!!!!!

'98 Eclipse GS
AEM CAI
Apex'i N1 Exhaust
Energy Motor Mounts
Energy Shifter Bushings
OBX Short Shifter
APR Front and Rear Strut Bars
Tenzo Rear Lower Tie Bar

2.4 ALL MOTOR BEAST IN THE WORKS!!!!!!!!!

so what's going on...i haven't heard anything more about this stuff? When are you going to be making these? When will they be done? How much will each of the pieces cost? Thanks

Mark
invaznGST on AIM
95 GS-T 5 Speed

Currently on car:
-TurboXS Type-H RFL Bov
-VDO Boost gauge
-Blitz FATT Turbo Timer
-Injen Intake System
-K&N Air Filter
-Front Strut tower bar
-Altezza taillights
-Painted rear center piece
-Porsche 'Tu

Tim, dude you know I want that dash piece. I guess bugging you so much about it wasn't so bad was it?

"Natty Ride"


http://dirty.thisfreedumb.com/

WOW!!!!!!!! Now thats some interest!! Thank you guys!

Okay, prices are only in my head at this time, i dont even have all the materials yet. these will take a little bit of time to make, so please be patient. As far as prices go, i wanna do what everyone thinks is fair, i will be open to negotiate final prices once i get all materials figured in, but these are just ROUGH ROUGH GUESTIMATIONS!!!!!!! may be higer, may be lower, its just too early to tell yet.

Shifter ring: $30.00-$40.00???
Dash peice: $100.00???

i will do a pole with some prices and let your guys imput be a factor. Most everybody seems fair in there judgements for past experiences and posts.
i will keep ya notified!

Tim

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

i soooo want one of those shift plates ..looks so nice

Mark

'95 Eclipse GST - gone
'00 Jetta GLS

im willing to pay 90 shipped for both.

HRC SUPER 16G FOR SALE BRAND NEW,, 550 USD
Dwayne H
A.K.A D-low
"PAID THE COST TO BE THE BOSS"

Fully built motor,Hrc stage 3, 19 inch rollers, Big Brakes, Targa top conversion, custom hood,supra taillights, trd wing with cf, kaminari widebody kit, air ride, autometer guages and all of Apexi Sacf, avc-r, rev/speed meter. interior fully glassed, tenzo r seats, pics soon to come!

>im willing to pay 90 shipped for both.
>
>HRC SUPER 16G FOR SALE BRAND NEW,, 550 USD
>Dwayne H
>A.K.A D-low
>"PAID THE COST TO BE THE BOSS"
>

Don't listen to anyone on pricing. You pretty much have a monopoly on these items so feel free to charge whatever you want, man. And since you're not taking money in advance, your takin a risk on over-producing.

So whatever price you finally decide on, I'm just gonna give you a big THANK YOU right now just for taking the initiative to make eclipses better then before.

ps, i'm interested in both as well.

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.

Add my name for those interested in the dash piece...

http://www.snappydsl.net/ctoledo/

I like that dash piece so put me in the list but I do have some questions about it though. How does that joker mount to the dash?

I edited to the wiki!

I'm really liking the shifter....can you post some better pics please?!? TIA

Keepin it clean!!

I'm still down for both pieces. THANK YOU!!!!

You know what i'll take one of the dash pieces too.

Navy Recruiter
Lexington Park, MD

ill take the shift plate asap.
could you post some closeup pix of it?

i will take the shifter plate

--- My 2gnt WIKI contribution ---> http://www.jamlez.com/2gnt

97 Eclipse Spyder

Hook me up with a shifter plate... Im interested!
Have paypal account... Will pay...
~Luke

----------------------------------------

I used to have a 420A...


'92 TSi AWD

11.8 @ 119mph
470awhp 405 ft/lb torque
30psi on E85 w/ Borg Warner S256 Turbo

My DSM Registry: http://www.dsmregistry.com/166

get us some closer pics and from different angles.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.